From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: "Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [rft, PATCH v1 1/1] pinctrl: qcom: lpass-lpi: Remove unused member in struct lpi_pingroup
Date: Mon, 20 Nov 2023 21:26:08 +0200 [thread overview]
Message-ID: <20231120193353.1670732-1-andriy.shevchenko@linux.intel.com> (raw)
The group is not used anywhere, remove it. And if needed, it should be
struct pingroup anyway.
While at it, replace kernel.h with what exactly being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
_Seems_ like this (I only read the code), hence rft.
drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 6 +----
.../pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 16 -------------
.../pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c | 20 ----------------
.../pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c | 20 ----------------
.../pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 15 ------------
.../pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c | 16 -------------
.../pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c | 24 -------------------
7 files changed, 1 insertion(+), 116 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
index 206b2c0ca828..a9b2f65c1ebe 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
@@ -6,8 +6,8 @@
#ifndef __PINCTRL_LPASS_LPI_H__
#define __PINCTRL_LPASS_LPI_H__
+#include <linux/array_size.h>
#include <linux/bits.h>
-#include <linux/kernel.h>
#include "../core.h"
@@ -45,11 +45,8 @@ struct pinctrl_pin_desc;
#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
{ \
- .group.name = "gpio" #id, \
- .group.pins = gpio##id##_pins, \
.pin = id, \
.slew_offset = soff, \
- .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \
.funcs = (int[]){ \
LPI_MUX_gpio, \
LPI_MUX_##f1, \
@@ -67,7 +64,6 @@ struct pinctrl_pin_desc;
#define LPI_FLAG_SLEW_RATE_SAME_REG BIT(0)
struct lpi_pingroup {
- struct group_desc group;
unsigned int pin;
/* Bit offset in slew register for SoundWire pins only */
int slew_offset;
diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
index 99156217c6a5..6bb39812e1d8 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
@@ -36,22 +36,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-
static const struct pinctrl_pin_desc sc7280_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c
index b33483056f42..c0369baf3398 100644
--- a/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sc8280xp-lpass-lpi.c
@@ -45,26 +45,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-static int gpio15_pins[] = { 15 };
-static int gpio16_pins[] = { 16 };
-static int gpio17_pins[] = { 17 };
-static int gpio18_pins[] = { 18 };
-
static const struct pinctrl_pin_desc sc8280xp_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c
index e8a6f6f6af54..316d6fc69131 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm6115-lpass-lpi.c
@@ -36,26 +36,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-static int gpio15_pins[] = { 15 };
-static int gpio16_pins[] = { 16 };
-static int gpio17_pins[] = { 17 };
-static int gpio18_pins[] = { 18 };
-
static const struct pinctrl_pin_desc sm6115_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
index cb10ce8d5d28..9791d9ba5087 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
@@ -36,21 +36,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-
static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
index 297cc95ac3c0..5b9a2cb216bd 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
@@ -36,22 +36,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-
static const struct pinctrl_pin_desc sm8350_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c
index 2e7896791fc0..a028cbb49947 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8450-lpass-lpi.c
@@ -52,30 +52,6 @@ enum lpass_lpi_functions {
LPI_MUX__,
};
-static int gpio0_pins[] = { 0 };
-static int gpio1_pins[] = { 1 };
-static int gpio2_pins[] = { 2 };
-static int gpio3_pins[] = { 3 };
-static int gpio4_pins[] = { 4 };
-static int gpio5_pins[] = { 5 };
-static int gpio6_pins[] = { 6 };
-static int gpio7_pins[] = { 7 };
-static int gpio8_pins[] = { 8 };
-static int gpio9_pins[] = { 9 };
-static int gpio10_pins[] = { 10 };
-static int gpio11_pins[] = { 11 };
-static int gpio12_pins[] = { 12 };
-static int gpio13_pins[] = { 13 };
-static int gpio14_pins[] = { 14 };
-static int gpio15_pins[] = { 15 };
-static int gpio16_pins[] = { 16 };
-static int gpio17_pins[] = { 17 };
-static int gpio18_pins[] = { 18 };
-static int gpio19_pins[] = { 19 };
-static int gpio20_pins[] = { 20 };
-static int gpio21_pins[] = { 21 };
-static int gpio22_pins[] = { 22 };
-
static const struct pinctrl_pin_desc sm8450_lpi_pins[] = {
PINCTRL_PIN(0, "gpio0"),
PINCTRL_PIN(1, "gpio1"),
--
2.43.0.rc1.1.gbec44491f096
next reply other threads:[~2023-11-20 19:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-20 19:26 Andy Shevchenko [this message]
2023-11-20 23:39 ` [rft, PATCH v1 1/1] pinctrl: qcom: lpass-lpi: Remove unused member in struct lpi_pingroup kernel test robot
2023-11-21 3:47 ` kernel test robot
2023-11-21 7:14 ` Krzysztof Kozlowski
2023-11-21 17:15 ` Andy Shevchenko
2023-11-22 15:34 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231120193353.1670732-1-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).