linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	Andy Shevchenko <andy@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/1] gpiolib: cdev: Split line_get_debounce_period() and use
Date: Thu, 21 Dec 2023 19:55:27 +0200	[thread overview]
Message-ID: <20231221175527.2814506-1-andriy.shevchenko@linux.intel.com> (raw)

Instead of repeating the same code and reduce possible miss
of READ_ONCE(), split line_get_debounce_period() heler out
and use in the existing cases.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpiolib-cdev.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index 744734405912..c573820d5722 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -651,6 +651,16 @@ static struct line *supinfo_find(struct gpio_desc *desc)
 	return NULL;
 }
 
+static unsigned int line_get_debounce_period(struct line *line)
+{
+	return READ_ONCE(line->debounce_period_us);
+}
+
+static inline bool line_has_supinfo(struct line *line)
+{
+	return line_get_debounce_period(line);
+}
+
 static void supinfo_to_lineinfo(struct gpio_desc *desc,
 				struct gpio_v2_line_info *info)
 {
@@ -665,15 +675,10 @@ static void supinfo_to_lineinfo(struct gpio_desc *desc,
 
 	attr = &info->attrs[info->num_attrs];
 	attr->id = GPIO_V2_LINE_ATTR_ID_DEBOUNCE;
-	attr->debounce_period_us = READ_ONCE(line->debounce_period_us);
+	attr->debounce_period_us = line_get_debounce_period(line);
 	info->num_attrs++;
 }
 
-static inline bool line_has_supinfo(struct line *line)
-{
-	return READ_ONCE(line->debounce_period_us);
-}
-
 /*
  * Checks line_has_supinfo() before and after the change to avoid unnecessary
  * supinfo_tree access.
@@ -846,7 +851,7 @@ static enum hte_return process_hw_ts(struct hte_ts_data *ts, void *p)
 		line->total_discard_seq++;
 		line->last_seqno = ts->seq;
 		mod_delayed_work(system_wq, &line->work,
-		  usecs_to_jiffies(READ_ONCE(line->debounce_period_us)));
+				 usecs_to_jiffies(line_get_debounce_period(line)));
 	} else {
 		if (unlikely(ts->seq < line->line_seqno))
 			return HTE_CB_HANDLED;
@@ -987,7 +992,7 @@ static irqreturn_t debounce_irq_handler(int irq, void *p)
 	struct line *line = p;
 
 	mod_delayed_work(system_wq, &line->work,
-		usecs_to_jiffies(READ_ONCE(line->debounce_period_us)));
+			 usecs_to_jiffies(line_get_debounce_period(line)));
 
 	return IRQ_HANDLED;
 }
@@ -1215,7 +1220,7 @@ static int edge_detector_update(struct line *line,
 			gpio_v2_line_config_debounce_period(lc, line_idx);
 
 	if ((active_edflags == edflags) &&
-	    (READ_ONCE(line->debounce_period_us) == debounce_period_us))
+	    (line_get_debounce_period(line) == debounce_period_us))
 		return 0;
 
 	/* sw debounced and still will be...*/
-- 
2.43.0.rc1.1.gbec44491f096


             reply	other threads:[~2023-12-21 18:50 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-21 17:55 Andy Shevchenko [this message]
2023-12-22  1:12 ` [PATCH v1 1/1] gpiolib: cdev: Split line_get_debounce_period() and use Kent Gibson
2023-12-22  8:58   ` Bartosz Golaszewski
2023-12-22 12:40     ` Andy Shevchenko
2023-12-22 12:58       ` Kent Gibson
2023-12-22 12:39   ` Andy Shevchenko
2023-12-22 12:56     ` Kent Gibson
2023-12-22 13:37       ` Bartosz Golaszewski
2023-12-22 14:08         ` Kent Gibson
2023-12-22 14:09           ` Bartosz Golaszewski
2023-12-22 14:14             ` Kent Gibson
2023-12-22 17:49               ` Linus Walleij
2023-12-23  2:08                 ` Kent Gibson
2023-12-28  0:26                   ` Linus Walleij
2023-12-28  0:49                     ` Kent Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231221175527.2814506-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=andy@kernel.org \
    --cc=bartosz.golaszewski@linaro.org \
    --cc=brgl@bgdev.pl \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).