linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	 Bartosz Golaszewski <brgl@bgdev.pl>,
	Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-mips@vger.kernel.org,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
	"Théo Lebrun" <theo.lebrun@bootlin.com>
Subject: [PATCH 18/23] gpio: nomadik: support mobileye,eyeq5-gpio
Date: Wed, 14 Feb 2024 17:24:11 +0100	[thread overview]
Message-ID: <20240214-mbly-gpio-v1-18-f88c0ccf372b@bootlin.com> (raw)
In-Reply-To: <20240214-mbly-gpio-v1-0-f88c0ccf372b@bootlin.com>

We create a custom compatible for the STA2X11 IP block as integrated
into the Mobileye EyeQ5 platform. Its wake and alternate functions have
been disabled, we want to avoid touching those registers.

We both do: (1) early return in functions that do not support the
platform, but with warnings, and (2) avoid calling those functions in
the first place.

We ensure that pinctrl-nomadik is not used with this STA2X11 variant.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 drivers/gpio/Kconfig                      |  5 +--
 drivers/gpio/gpio-nomadik.c               | 52 ++++++++++++++++++++++++++-----
 drivers/pinctrl/nomadik/pinctrl-nomadik.c |  2 ++
 include/linux/gpio/gpio-nomadik.h         |  1 +
 4 files changed, 51 insertions(+), 9 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ff83371251c1..fe6112abb73a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -480,11 +480,12 @@ config GPIO_MXS
 
 config GPIO_NOMADIK
 	bool "Nomadik GPIO driver"
-	depends on ARCH_U8500 || ARCH_NOMADIK || COMPILE_TEST
+	depends on ARCH_U8500 || ARCH_NOMADIK || MACH_EYEQ5 || COMPILE_TEST
 	select OF_GPIO
 	select GPIOLIB_IRQCHIP
 	help
-	  Say yes here to support the Nomadik SoC GPIO block.
+	  Say yes here to support the Nomadik SoC GPIO block. This block is also
+	  used by the Mobileye EyeQ5 SoC.
 
 	  It handles up to 32 GPIOs per bank, that can all be interrupt sources.
 	  It is deeply interconnected with the associated pinctrl driver as GPIO
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 02b53c58adf7..21bb6d6363fc 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -7,6 +7,12 @@
  * The GPIO chips are shared with pinctrl-nomadik if used; it needs access for
  * pinmuxing functionality and others.
  *
+ * This driver also handles the mobileye,eyeq5-gpio compatible. It is an STA2X11
+ * but with only data, direction and interrupts register active. We want to
+ * avoid touching SLPM, RWIMSC, FWIMSC, AFSLA and AFSLB registers; that is,
+ * wake and alternate function registers. It is NOT compatible with
+ * pinctrl-nomadik.
+ *
  * Copyright (C) 2008,2009 STMicroelectronics
  * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
  *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
@@ -31,11 +37,17 @@
 static DEFINE_SPINLOCK(nmk_gpio_slpm_lock);
 #endif
 
+#define NMK_GPIO_FLAG_QUIRK_MBLY	BIT(0)
+
 void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip, unsigned int offset,
 			 enum nmk_gpio_slpm mode)
 {
 	u32 slpm;
 
+	/* We should NOT have been called. */
+	if (WARN_ON(nmk_chip->quirk_mbly))
+		return;
+
 	slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC);
 	if (mode == NMK_GPIO_SLPM_NOCHANGE)
 		slpm |= BIT(offset);
@@ -92,6 +104,9 @@ static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
 		rimscval = &nmk_chip->rimsc;
 		fimscval = &nmk_chip->fimsc;
 	} else  {
+		/* We should NOT have been called. */
+		if (WARN_ON(nmk_chip->quirk_mbly))
+			return;
 		rimscreg = NMK_GPIO_RWIMSC;
 		fimscreg = NMK_GPIO_FWIMSC;
 		rimscval = &nmk_chip->rwimsc;
@@ -118,6 +133,10 @@ static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
 static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
 				int offset, bool on)
 {
+	/* We should NOT have been called. */
+	if (WARN_ON(nmk_chip->quirk_mbly))
+		return;
+
 	/*
 	 * Ensure WAKEUP_ENABLE is on.  No need to disable it if wakeup is
 	 * disabled, since setting SLPM to 1 increases power consumption, and
@@ -142,7 +161,7 @@ static void nmk_gpio_irq_maskunmask(struct nmk_gpio_chip *nmk_chip,
 
 	__nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, enable);
 
-	if (!(nmk_chip->real_wake & BIT(d->hwirq)))
+	if (!nmk_chip->quirk_mbly && !(nmk_chip->real_wake & BIT(d->hwirq)))
 		__nmk_gpio_set_wake(nmk_chip, d->hwirq, enable);
 
 	spin_unlock(&nmk_chip->lock);
@@ -174,6 +193,10 @@ static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
 	struct nmk_gpio_chip *nmk_chip = gpiochip_get_data(gc);
 	unsigned long flags;
 
+	/* Handler is registered in all cases. */
+	if (nmk_chip->quirk_mbly)
+		return -ENXIO;
+
 	clk_enable(nmk_chip->clk);
 	spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
 	spin_lock(&nmk_chip->lock);
@@ -212,7 +235,7 @@ static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	if (enabled)
 		__nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, false);
 
-	if (enabled || wake)
+	if (!nmk_chip->quirk_mbly && (enabled || wake))
 		__nmk_gpio_irq_modify(nmk_chip, d->hwirq, WAKE, false);
 
 	nmk_chip->edge_rising &= ~BIT(d->hwirq);
@@ -226,7 +249,7 @@ static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 	if (enabled)
 		__nmk_gpio_irq_modify(nmk_chip, d->hwirq, NORMAL, true);
 
-	if (enabled || wake)
+	if (!nmk_chip->quirk_mbly && (enabled || wake))
 		__nmk_gpio_irq_modify(nmk_chip, d->hwirq, WAKE, true);
 
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
@@ -359,6 +382,10 @@ static int nmk_gpio_get_mode(struct nmk_gpio_chip *nmk_chip, int offset)
 {
 	u32 afunc, bfunc;
 
+	/* We don't support modes. */
+	if (nmk_chip->quirk_mbly)
+		return NMK_GPIO_ALT_GPIO;
+
 	clk_enable(nmk_chip->clk);
 
 	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & BIT(offset);
@@ -490,6 +517,7 @@ struct nmk_gpio_chip *nmk_gpio_populate_chip(struct device_node *np,
 	struct resource *res;
 	struct clk *clk;
 	void __iomem *base;
+	uintptr_t flags;
 	u32 id, ngpio;
 
 	gpio_pdev = of_find_device_by_node(np);
@@ -523,6 +551,8 @@ struct nmk_gpio_chip *nmk_gpio_populate_chip(struct device_node *np,
 		dev_dbg(&pdev->dev, "populate: using default ngpio (%d)\n", ngpio);
 	}
 
+	flags = (uintptr_t)of_device_get_match_data(&gpio_pdev->dev);
+	nmk_chip->quirk_mbly = !!(flags & NMK_GPIO_FLAG_QUIRK_MBLY);
 	nmk_chip->bank = id;
 	chip = &nmk_chip->chip;
 	chip->base = -1;
@@ -637,9 +667,11 @@ static int nmk_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	clk_enable(nmk_chip->clk);
-	nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI);
-	clk_disable(nmk_chip->clk);
+	if (!nmk_chip->quirk_mbly) {
+		clk_enable(nmk_chip->clk);
+		nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI);
+		clk_disable(nmk_chip->clk);
+	}
 
 	ret = gpiochip_add_data(chip, nmk_chip);
 	if (ret)
@@ -653,7 +685,13 @@ static int nmk_gpio_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id nmk_gpio_match[] = {
-	{ .compatible = "st,nomadik-gpio", },
+	{
+		.compatible = "st,nomadik-gpio",
+	},
+	{
+		.compatible = "mobileye,eyeq5-gpio",
+		.data = (void*)NMK_GPIO_FLAG_QUIRK_MBLY,
+	},
 	{}
 };
 
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 99bdb25f358d..d1c5f353c6a9 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1229,6 +1229,8 @@ static int nmk_pinctrl_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev,
 				"could not populate nmk chip struct - continue anyway\n");
 		of_node_put(gpio_np);
+		/* We are NOT compatible with mobileye,eyeq5-gpio. */
+		BUG_ON(nmk_chip->quirk_mbly);
 	}
 
 	prcm_np = of_parse_phandle(np, "prcm", 0);
diff --git a/include/linux/gpio/gpio-nomadik.h b/include/linux/gpio/gpio-nomadik.h
index 8f7bb756ad35..8d0134dd3771 100644
--- a/include/linux/gpio/gpio-nomadik.h
+++ b/include/linux/gpio/gpio-nomadik.h
@@ -58,6 +58,7 @@ struct nmk_gpio_chip {
 	spinlock_t lock;
 	raw_spinlock_t fake_lock;
 	bool sleepmode;
+	bool quirk_mbly;
 	/* Keep track of configured edges */
 	u32 edge_rising;
 	u32 edge_falling;

-- 
2.43.1


  parent reply	other threads:[~2024-02-14 16:24 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-14 16:23 [PATCH 00/23] Rework Nomadik GPIO to add Mobileye EyeQ5 support Théo Lebrun
2024-02-14 16:23 ` [PATCH 01/23] dt-bindings: gpio: nomadik: convert into yaml format Théo Lebrun
2024-02-15  9:11   ` Krzysztof Kozlowski
2024-02-15  9:47     ` Théo Lebrun
2024-02-19 14:50   ` Linus Walleij
2024-02-14 16:23 ` [PATCH 02/23] dt-bindings: gpio: nomadik: add optional ngpios property Théo Lebrun
2024-02-15  9:12   ` Krzysztof Kozlowski
2024-02-19 14:50   ` Linus Walleij
2024-02-19 14:55     ` Théo Lebrun
2024-02-14 16:23 ` [PATCH 03/23] dt-bindings: gpio: nomadik: add mobileye,eyeq5-gpio compatible Théo Lebrun
2024-02-15  9:13   ` Krzysztof Kozlowski
2024-02-15  9:52     ` Théo Lebrun
2024-02-14 16:23 ` [PATCH 04/23] dt-bindings: gpio: nomadik: add optional reset property Théo Lebrun
2024-02-15  9:13   ` Krzysztof Kozlowski
2024-02-19 14:55   ` Linus Walleij
2024-02-14 16:23 ` [PATCH 05/23] gpio: nomadik: extract GPIO platform driver from drivers/pinctrl/nomadik/ Théo Lebrun
2024-02-15 10:03   ` Philipp Zabel
2024-02-16 10:43     ` Théo Lebrun
2024-02-19 15:33     ` Bartosz Golaszewski
2024-02-21 11:41       ` Philipp Zabel
2024-02-19 16:08   ` Bartosz Golaszewski
2024-02-21 16:02     ` Théo Lebrun
2024-02-21 14:37   ` Linus Walleij
2024-02-21 16:20     ` Théo Lebrun
2024-02-21 19:31       ` Linus Walleij
2024-02-14 16:23 ` [PATCH 06/23] pinctrl: nomadik: fix build warning (-Wformat) Théo Lebrun
2024-02-14 16:24 ` [PATCH 07/23] pinctrl: nomadik: fix build warning (-Wpointer-to-int-cast) Théo Lebrun
2024-02-14 16:24 ` [PATCH 08/23] pinctrl: nomadik: minimise indentation in probe Théo Lebrun
2024-02-14 16:24 ` [PATCH 09/23] pinctrl: nomadik: follow type-system kernel coding conventions Théo Lebrun
2024-02-14 16:24 ` [PATCH 10/23] pinctrl: nomadik: follow whitespace " Théo Lebrun
2024-02-14 16:24 ` [PATCH 11/23] pinctrl: nomadik: follow conditional " Théo Lebrun
2024-02-14 16:24 ` [PATCH 12/23] gpio: nomadik: request dynamic ID allocation Théo Lebrun
2024-02-14 16:24 ` [PATCH 13/23] gpio: nomadik: fix offset bug in nmk_pmx_set() Théo Lebrun
2024-02-19 15:54   ` Bartosz Golaszewski
2024-02-21 15:57     ` Théo Lebrun
2024-02-19 21:56   ` Linus Walleij
2024-02-21 16:05     ` Théo Lebrun
2024-02-14 16:24 ` [PATCH 14/23] gpio: nomadik: make clock optional Théo Lebrun
2024-02-14 16:24 ` [PATCH 15/23] gpio: nomadik: change driver name from gpio to gpio-nomadik Théo Lebrun
2024-02-14 16:24 ` [PATCH 16/23] gpio: nomadik: support shared GPIO IRQs Théo Lebrun
2024-02-19 15:48   ` Bartosz Golaszewski
2024-02-19 15:54     ` Théo Lebrun
2024-02-19 16:17       ` Bartosz Golaszewski
2024-02-20  8:07     ` Linus Walleij
2024-02-14 16:24 ` [PATCH 17/23] gpio: nomadik: handle variadic GPIO count Théo Lebrun
2024-02-19 16:17   ` Bartosz Golaszewski
2024-02-20  8:08   ` Linus Walleij
2024-02-14 16:24 ` Théo Lebrun [this message]
2024-02-21 13:45   ` [PATCH 18/23] gpio: nomadik: support mobileye,eyeq5-gpio Linus Walleij
2024-02-21 16:22     ` Théo Lebrun
2024-02-21 14:31   ` Linus Walleij
2024-02-21 16:16     ` Théo Lebrun
2024-02-21 19:36       ` Linus Walleij
2024-02-22  9:37         ` Théo Lebrun
2024-02-14 16:24 ` [PATCH 19/23] gpio: nomadik: grab optional reset control and deassert it at probe Théo Lebrun
2024-02-15 10:19   ` Philipp Zabel
2024-02-16 10:46     ` Théo Lebrun
2024-02-14 16:24 ` [PATCH 20/23] MIPS: eyeq5_defconfig: enable GPIO by default Théo Lebrun
2024-02-14 16:24 ` [PATCH 21/23] MIPS: mobileye: eyeq5: add two GPIO bank nodes Théo Lebrun
2024-02-14 16:24 ` [PATCH 22/23] MIPS: mobileye: eyeq5: add resets to GPIO banks Théo Lebrun
2024-02-14 16:24 ` [PATCH 23/23] MIPS: mobileye: eyeq5: map GPIOs to pins using gpio-ranges Théo Lebrun
2024-02-19 15:44 ` [PATCH 00/23] Rework Nomadik GPIO to add Mobileye EyeQ5 support Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240214-mbly-gpio-v1-18-f88c0ccf372b@bootlin.com \
    --to=theo.lebrun@bootlin.com \
    --cc=brgl@bgdev.pl \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=tawfik.bayouk@mobileye.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tsbogend@alpha.franken.de \
    --cc=vladimir.kondratiev@mobileye.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).