linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Kent Gibson <warthog618@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alexey Dobriyan <adobriyan@gmail.com>,
	stable@vger.kernel.org, Stefan Wahren <wahrenst@gmx.net>,
	Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH v2] gpio: cdev: sanitize the label before requesting the interrupt
Date: Fri, 22 Mar 2024 10:02:08 +0100	[thread overview]
Message-ID: <20240322090209.13384-1-brgl@bgdev.pl> (raw)

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

When an interrupt is requested, a procfs directory is created under
"/proc/irq/<irqnum>/<label>" where <label> is the string passed to one of
the request_irq() variants.

What follows is that the string must not contain the "/" character or
the procfs mkdir operation will fail. We don't have such constraints for
GPIO consumer labels which are used verbatim as interrupt labels for
GPIO irqs. We must therefore sanitize the consumer string before
requesting the interrupt.

Let's replace all "/" with ":".

Cc: stable@vger.kernel.org
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Closes: https://lore.kernel.org/linux-gpio/39fe95cb-aa83-4b8b-8cab-63947a726754@gmx.net/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
v1 -> v2:
- use ':' as the delimiter instead of '-'
- return -ENOMEM if creating the label fails

 drivers/gpio/gpiolib-cdev.c | 34 +++++++++++++++++++++++++++++-----
 1 file changed, 29 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index f384fa278764..7a102ebac428 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -1083,10 +1083,20 @@ static u32 gpio_v2_line_config_debounce_period(struct gpio_v2_line_config *lc,
 	return 0;
 }
 
+static inline char *make_irq_label(const char *orig)
+{
+	return kstrdup_and_replace(orig, '/', ':', GFP_KERNEL);
+}
+
+static inline void free_irq_label(const char *label)
+{
+	kfree(label);
+}
+
 static void edge_detector_stop(struct line *line)
 {
 	if (line->irq) {
-		free_irq(line->irq, line);
+		free_irq_label(free_irq(line->irq, line));
 		line->irq = 0;
 	}
 
@@ -1110,6 +1120,7 @@ static int edge_detector_setup(struct line *line,
 	unsigned long irqflags = 0;
 	u64 eflags;
 	int irq, ret;
+	char *label;
 
 	eflags = edflags & GPIO_V2_LINE_EDGE_FLAGS;
 	if (eflags && !kfifo_initialized(&line->req->events)) {
@@ -1146,11 +1157,17 @@ static int edge_detector_setup(struct line *line,
 			IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
 	irqflags |= IRQF_ONESHOT;
 
+	label = make_irq_label(line->req->label);
+	if (!label)
+		return -ENOMEM;
+
 	/* Request a thread to read the events */
 	ret = request_threaded_irq(irq, edge_irq_handler, edge_irq_thread,
-				   irqflags, line->req->label, line);
-	if (ret)
+				   irqflags, label, line);
+	if (ret) {
+		free_irq_label(label);
 		return ret;
+	}
 
 	line->irq = irq;
 	return 0;
@@ -1973,7 +1990,7 @@ static void lineevent_free(struct lineevent_state *le)
 		blocking_notifier_chain_unregister(&le->gdev->device_notifier,
 						   &le->device_unregistered_nb);
 	if (le->irq)
-		free_irq(le->irq, le);
+		free_irq_label(free_irq(le->irq, le));
 	if (le->desc)
 		gpiod_free(le->desc);
 	kfree(le->label);
@@ -2114,6 +2131,7 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 	int fd;
 	int ret;
 	int irq, irqflags = 0;
+	char *label;
 
 	if (copy_from_user(&eventreq, ip, sizeof(eventreq)))
 		return -EFAULT;
@@ -2198,12 +2216,18 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
 	if (ret)
 		goto out_free_le;
 
+	label = make_irq_label(le->label);
+	if (!label) {
+		ret = -ENOMEM;
+		goto out_free_le;
+	}
+
 	/* Request a thread to read the events */
 	ret = request_threaded_irq(irq,
 				   lineevent_irq_handler,
 				   lineevent_irq_thread,
 				   irqflags,
-				   le->label,
+				   label,
 				   le);
 	if (ret)
 		goto out_free_le;
-- 
2.40.1


             reply	other threads:[~2024-03-22  9:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-22  9:02 Bartosz Golaszewski [this message]
2024-03-22 11:18 ` [PATCH v2] gpio: cdev: sanitize the label before requesting the interrupt Kent Gibson
2024-03-22 11:52   ` Bartosz Golaszewski
2024-03-22 11:57     ` Kent Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240322090209.13384-1-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=adobriyan@gmail.com \
    --cc=bartosz.golaszewski@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=wahrenst@gmx.net \
    --cc=warthog618@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).