From: Richard Acayan <mailingradian@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org
Cc: Richard Acayan <mailingradian@gmail.com>
Subject: [PATCH] pinctrl: qcom: sdm670: add pdc wakeirq map
Date: Thu, 23 May 2024 19:06:20 -0400 [thread overview]
Message-ID: <20240523230619.256882-2-mailingradian@gmail.com> (raw)
The PDC was hooked up as a wakeup parent in the DTS in
commit 71f080633d1e ("arm64: dts: qcom: sdm670: Hook up PDC as
wakeup-parent of TLMM"), but the wakeirq mapping was not defined so it
had no effect. Add the mapping for wakeup interrupts on the PDC to their
corresponding pins.
Configuring a pin IRQ as dual-edge would break it unless the
wakeirq_dual_edge_errata flag is set.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
---
drivers/pinctrl/qcom/pinctrl-sdm670.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm670.c b/drivers/pinctrl/qcom/pinctrl-sdm670.c
index 1e694a966953..894c042cb524 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm670.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm670.c
@@ -1290,6 +1290,22 @@ static const int sdm670_reserved_gpios[] = {
58, 59, 60, 61, 62, 63, 64, 69, 70, 71, 72, 73, 74, 104, -1
};
+static const struct msm_gpio_wakeirq_map sdm670_pdc_map[] = {
+ { 1, 30 }, { 3, 31 }, { 5, 32 }, { 10, 33 }, { 11, 34 },
+ { 20, 35 }, { 22, 36 }, { 24, 37 }, { 26, 38 }, { 30, 39 },
+ { 31, 117 }, { 32, 41 }, { 34, 42 }, { 36, 43 }, { 37, 44 },
+ { 38, 45 }, { 39, 46 }, { 40, 47 }, { 41, 115 }, { 43, 49 },
+ { 44, 50 }, { 46, 51 }, { 48, 52 }, { 49, 118 }, { 52, 54 },
+ { 53, 55 }, { 54, 56 }, { 56, 57 }, { 57, 58 }, { 66, 66 },
+ { 68, 67 }, { 77, 70 }, { 78, 71 }, { 79, 72 }, { 80, 73 },
+ { 84, 74 }, { 85, 75 }, { 86, 76 }, { 88, 77 }, { 89, 116 },
+ { 91, 79 }, { 92, 80 }, { 95, 81 }, { 96, 82 }, { 97, 83 },
+ { 101, 84 }, { 103, 85 }, { 115, 90 }, { 116, 91 }, { 117, 92 },
+ { 118, 93 }, { 119, 94 }, { 120, 95 }, { 121, 96 }, { 122, 97 },
+ { 123, 98 }, { 124, 99 }, { 125, 100 }, { 127, 102 }, { 128, 103 },
+ { 129, 104 }, { 130, 105 }, { 132, 106 }, { 133, 107 }, { 145, 108 },
+};
+
static const struct msm_pinctrl_soc_data sdm670_pinctrl = {
.pins = sdm670_pins,
.npins = ARRAY_SIZE(sdm670_pins),
@@ -1299,6 +1315,9 @@ static const struct msm_pinctrl_soc_data sdm670_pinctrl = {
.ngroups = ARRAY_SIZE(sdm670_groups),
.ngpios = 151,
.reserved_gpios = sdm670_reserved_gpios,
+ .wakeirq_map = sdm670_pdc_map,
+ .nwakeirq_map = ARRAY_SIZE(sdm670_pdc_map),
+ .wakeirq_dual_edge_errata = true,
};
static int sdm670_pinctrl_probe(struct platform_device *pdev)
--
2.45.1
next reply other threads:[~2024-05-23 23:06 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-23 23:06 Richard Acayan [this message]
2024-06-07 20:41 ` [PATCH] pinctrl: qcom: sdm670: add pdc wakeirq map Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240523230619.256882-2-mailingradian@gmail.com \
--to=mailingradian@gmail.com \
--cc=andersson@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).