[PATCH 1/2] Documentation: gpio: Clarify effect of active low flag on line values

[Kent Gibson <warthog618@gmail.com>]

The documentation does not make sufficiently clear that the uAPI deals with
logical line values, nor does it describe the influence of the active low
flag on the mapping between physical and logical line values.

Clarify the relationship between physical and logical line values and the
effect of the active low flag for ioctls passing line values.

Suggested-by: David C. Rankin <drankinatty@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 .../gpio/gpio-handle-get-line-values-ioctl.rst             | 7 +++++++
 .../gpio/gpio-handle-set-line-values-ioctl.rst             | 7 +++++++
 .../userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst   | 7 +++++++
 .../userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst   | 7 +++++++
 4 files changed, 28 insertions(+)

diff --git a/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst
index 25263b8f0588..2e3a52c113d5 100644
--- a/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst
+++ b/Documentation/userspace-api/gpio/gpio-handle-get-line-values-ioctl.rst
@@ -36,6 +36,13 @@ Description
 
 Get the values of all requested lines.
 
+The values returned are logical, indicating if the line is active or inactive.
+The ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` flag controls the mapping between physical
+values (high/low) and logical values (active/inactive).
+If ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` is not set then high is active and
+low is inactive. If ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` is set then low is active
+and high is inactive.
+
 The values of both input and output lines may be read.
 
 For output lines, the value returned is driver and configuration dependent and
diff --git a/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst
index 0aa05e623a6c..12862132b420 100644
--- a/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst
+++ b/Documentation/userspace-api/gpio/gpio-handle-set-line-values-ioctl.rst
@@ -36,6 +36,13 @@ Description
 
 Set the values of all requested output lines.
 
+The values set are logical, indicating if the line is to be active or inactive.
+The ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` flag controls the mapping between logical
+values (active/inactive) and physical values (high/low).
+If  ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` is not set then active is high and
+inactive is low. If ``GPIOHANDLE_REQUEST_ACTIVE_LOW`` is set then active is low
+and inactive is high.
+
 Only the values of output lines may be set.
 Attempting to set the value of input lines is an error (**EPERM**).
 
diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst
index e4e74a1926d8..d7defd4ca397 100644
--- a/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst
+++ b/Documentation/userspace-api/gpio/gpio-v2-line-get-values-ioctl.rst
@@ -34,6 +34,13 @@ Description
 
 Get the values of requested lines.
 
+The values returned are logical, indicating if the line is active or inactive.
+The ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` flag controls the mapping between physical
+values (high/low) and logical values (active/inactive).
+If ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` is not set then high is active and low is
+inactive.  If ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` is set then low is active and
+high is inactive.
+
 The values of both input and output lines may be read.
 
 For output lines, the value returned is driver and configuration dependent and
diff --git a/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst b/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst
index 6d2d1886950b..16dd50fc60ca 100644
--- a/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst
+++ b/Documentation/userspace-api/gpio/gpio-v2-line-set-values-ioctl.rst
@@ -35,6 +35,13 @@ Description
 
 Set the values of requested output lines.
 
+The values set are logical, indicating if the line is to be active or inactive.
+The ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` flag controls the mapping between logical
+values (active/inactive) and physical values (high/low).
+If ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` is not set then active is high and inactive
+is low.  If ``GPIO_V2_LINE_FLAG_ACTIVE_LOW`` is set then active is low and
+inactive is high.
+
 Only the values of output lines may be set.
 Attempting to set the value of an input line is an error (**EPERM**).
 
-- 
2.39.2