From: Paul Barker <paul.barker.ct@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: Paul Barker <paul.barker.ct@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 6/9] arm64: dts: renesas: rzg2ul: Enable Ethernet TXC output
Date: Tue, 11 Jun 2024 12:32:00 +0100 [thread overview]
Message-ID: <20240611113204.3004-7-paul.barker.ct@bp.renesas.com> (raw)
In-Reply-To: <20240611113204.3004-1-paul.barker.ct@bp.renesas.com>
Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/G2UL and
RZ/Five SMARC SoMs, as per RGMII specification.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes v1->v2:
* Clarified that this patch also affects RZ/Five.
* Picked up Geert's Reviewed-by tag.
.../boot/dts/renesas/rzg2ul-smarc-som.dtsi | 76 +++++++++++--------
1 file changed, 44 insertions(+), 32 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
index 97cdad2a12e2..417f49090b15 100644
--- a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
@@ -142,41 +142,53 @@ adc_pins: adc {
};
eth0_pins: eth0 {
- pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */
- <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
- <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */
- <RZG2L_PORT_PINMUX(1, 0, 1)>, /* ET0_TXC */
- <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */
- <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */
- <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */
- <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */
- <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */
- <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */
- <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */
- <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */
- <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */
- <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */
- <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */
- <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */
+ txc {
+ pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>; /* ET0_TXC */
+ output-enable;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */
+ <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
+ <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */
+ <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */
+ <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */
+ <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */
+ <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */
+ <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */
+ <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */
+ <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */
+ <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */
+ <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */
+ <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */
+ <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */
+ <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */
+ };
};
eth1_pins: eth1 {
- pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */
- <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */
- <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */
- <RZG2L_PORT_PINMUX(7, 0, 1)>, /* ET1_TXC */
- <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */
- <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */
- <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */
- <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */
- <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */
- <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */
- <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */
- <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */
- <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */
- <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */
- <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */
- <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */
+ txc {
+ pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>; /* ET1_TXC */
+ output-enable;
+ };
+
+ mux {
+ pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */
+ <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */
+ <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */
+ <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */
+ <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */
+ <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */
+ <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */
+ <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */
+ <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */
+ <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */
+ <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */
+ <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */
+ <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */
+ <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */
+ <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */
+ };
};
sdhi0_emmc_pins: sd0emmc {
--
2.39.2
next prev parent reply other threads:[~2024-06-11 11:33 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-11 11:31 [PATCH v2 0/9] Configure GbEth for RGMII on RZ/G2L family Paul Barker
2024-06-11 11:31 ` [PATCH v2 1/9] pinctrl: renesas: rzg2l: Clarify OEN read/write support Paul Barker
2024-06-17 11:52 ` Geert Uytterhoeven
2024-06-17 14:22 ` Paul Barker
2024-06-11 11:31 ` [PATCH v2 2/9] pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functions Paul Barker
2024-06-17 12:02 ` Geert Uytterhoeven
2024-06-25 19:56 ` Paul Barker
2024-06-26 6:19 ` claudiu beznea
2024-06-11 11:31 ` [PATCH v2 3/9] pinctrl: renesas: rzg2l: Support output enable on RZ/G2L Paul Barker
2024-06-17 12:15 ` Geert Uytterhoeven
2024-06-11 11:31 ` [PATCH v2 4/9] arm64: dts: renesas: rzg2l: Enable Ethernet TXC output Paul Barker
2024-06-11 11:31 ` [PATCH v2 5/9] arm64: dts: renesas: rzg2lc: " Paul Barker
2024-06-11 11:32 ` Paul Barker [this message]
2024-06-11 11:32 ` [PATCH v2 7/9] arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V Paul Barker
2024-06-11 11:32 ` [PATCH v2 8/9] arm64: dts: renesas: rzg2lc: " Paul Barker
2024-06-11 11:32 ` [PATCH v2 9/9] arm64: dts: renesas: rzg2ul: " Paul Barker
2024-06-11 13:14 ` [PATCH v2 0/9] Configure GbEth for RGMII on RZ/G2L family Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240611113204.3004-7-paul.barker.ct@bp.renesas.com \
--to=paul.barker.ct@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).