[PATCH v2 0/2] add ast2600 NCSI pin group

[PATCH v2 0/2] add ast2600 NCSI pin group

[Potin Lai]

In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
needed on the management controller side.

LINK: [v1] https://lore.kernel.org/all/20240613080725.2531580-1-potin.lai.pt@gmail.com/

changes v1 --> v2:
- add NCSI pin group in dt-bindings document

Potin Lai (2):
  pinctrl: aspeed-g6: Add NCSI pin group config
  dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group

 .../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml       |  2 ++
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c             | 10 ++++++++--
 2 files changed, 10 insertions(+), 2 deletions(-)

-- 
2.31.1

[PATCH v2 1/2] pinctrl: aspeed-g6: Add NCSI pin group config

[Potin Lai]

In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
needed on the management controller side.

To optimize pin usage, add new NCSI pin groupis that excludes RMIIXRCLKO,
reducing the number of required pins.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index 7938741136a2c..31e4e0b342a00 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -249,7 +249,9 @@ PIN_DECL_2(E26, GPIOD3, RGMII3RXD3, RMII3RXER);
 
 FUNC_GROUP_DECL(RGMII3, H24, J22, H22, H23, G22, F22, G23, G24, F23, F26, F25,
 		E26);
-FUNC_GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
+GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
+GROUP_DECL(NCSI3, J22, H22, H23, G23, F23, F26, F25, E26);
+FUNC_DECL_2(RMII3, RMII3, NCSI3);
 
 #define F24 28
 SIG_EXPR_LIST_DECL_SESG(F24, NCTS3, NCTS3, SIG_DESC_SET(SCU410, 28));
@@ -355,7 +357,9 @@ FUNC_GROUP_DECL(NRTS4, B24);
 
 FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
 		B24);
-FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
+GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
+GROUP_DECL(NCSI4, E23, E24, E25, C25, C24, B26, B25, B24);
+FUNC_DECL_2(RMII4, RMII4, NCSI4);
 
 #define D22 40
 SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
@@ -1976,6 +1980,8 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
 	ASPEED_PINCTRL_GROUP(MDIO2),
 	ASPEED_PINCTRL_GROUP(MDIO3),
 	ASPEED_PINCTRL_GROUP(MDIO4),
+	ASPEED_PINCTRL_GROUP(NCSI3),
+	ASPEED_PINCTRL_GROUP(NCSI4),
 	ASPEED_PINCTRL_GROUP(NCTS1),
 	ASPEED_PINCTRL_GROUP(NCTS2),
 	ASPEED_PINCTRL_GROUP(NCTS3),
-- 
2.31.1

Re: [PATCH v2 1/2] pinctrl: aspeed-g6: Add NCSI pin group config

[Paul Menzel]

Dear Potin,


Thank you for your patch.

Am 20.06.24 um 03:25 schrieb Potin Lai:
> In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
> needed on the management controller side.

Please add a reference to the source for this statement.

> To optimize pin usage, add new NCSI pin groupis that excludes RMIIXRCLKO,

groupis? Do you mean group?

> reducing the number of required pins.
> 
> Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
> ---
>   drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 10 ++++++++--
>   1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> index 7938741136a2c..31e4e0b342a00 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> @@ -249,7 +249,9 @@ PIN_DECL_2(E26, GPIOD3, RGMII3RXD3, RMII3RXER);
>   
>   FUNC_GROUP_DECL(RGMII3, H24, J22, H22, H23, G22, F22, G23, G24, F23, F26, F25,
>   		E26);
> -FUNC_GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
> +GROUP_DECL(RMII3, H24, J22, H22, H23, G23, F23, F26, F25, E26);
> +GROUP_DECL(NCSI3, J22, H22, H23, G23, F23, F26, F25, E26);
> +FUNC_DECL_2(RMII3, RMII3, NCSI3);
>   
>   #define F24 28
>   SIG_EXPR_LIST_DECL_SESG(F24, NCTS3, NCTS3, SIG_DESC_SET(SCU410, 28));
> @@ -355,7 +357,9 @@ FUNC_GROUP_DECL(NRTS4, B24);
>   
>   FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
>   		B24);
> -FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
> +GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
> +GROUP_DECL(NCSI4, E23, E24, E25, C25, C24, B26, B25, B24);
> +FUNC_DECL_2(RMII4, RMII4, NCSI4);
>   
>   #define D22 40
>   SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
> @@ -1976,6 +1980,8 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
>   	ASPEED_PINCTRL_GROUP(MDIO2),
>   	ASPEED_PINCTRL_GROUP(MDIO3),
>   	ASPEED_PINCTRL_GROUP(MDIO4),
> +	ASPEED_PINCTRL_GROUP(NCSI3),
> +	ASPEED_PINCTRL_GROUP(NCSI4),
>   	ASPEED_PINCTRL_GROUP(NCTS1),
>   	ASPEED_PINCTRL_GROUP(NCTS2),
>   	ASPEED_PINCTRL_GROUP(NCTS3),


Kind regards,

Paul

[PATCH v2 2/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group

[Potin Lai]

In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
needed on the management controller side.

Add NCSI group to distinguish the pin group between RMII and NCSI.

- RMII pins:
  - RMIIXRCLKI
  - RMIIXRXD0
  - RMIIXRXD1
  - RMIIXCRSDV
  - RMIIXRXER
  - RMIIXRCLKO
  - RMIIXTXEN
  - RMIIXTXD0
  - RMIIXTXD1

- NCSI pins:
  - RMIIXRCLKI
  - RMIIXRXD0
  - RMIIXRXD1
  - RMIIXCRSDV
  - RMIIXRXER
  - RMIIXTXEN
  - RMIIXTXD0
  - RMIIXTXD1

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
---
 .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml     | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index 00b6974a5ed3d..3f02dc94a7ce2 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -337,6 +337,8 @@ additionalProperties:
         - MDIO2
         - MDIO3
         - MDIO4
+        - NCSI3
+        - NCSI4
         - NCTS1
         - NCTS2
         - NCTS3
-- 
2.31.1

Re: [PATCH v2 2/2] dt-bindings: pinctrl: aspeed,ast2600-pinctrl: add NCSI group

[Krzysztof Kozlowski]

On 20/06/2024 03:25, Potin Lai wrote:
> In the NCSI pin table, the reference clock output pin (RMIIXRCLKO) is not
> needed on the management controller side.
> 
> Add NCSI group to distinguish the pin group between RMII and NCSI.

Bindings go before users.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


---

<form letter>
This is an automated instruction, just in case, because many review tags
are being ignored. If you know the process, you can skip it (please do
not feel offended by me posting it here - no bad intentions intended).
If you do not know the process, here is a short explanation:

Please add Acked-by/Reviewed-by/Tested-by tags when posting new
versions, under or above your Signed-off-by tag. Tag is "received", when
provided in a message replied to you on the mailing list. Tools like b4
can help here. However, there's no need to repost patches *only* to add
the tags. The upstream maintainer will do that for tags received on the
version they apply.

https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
</form letter>

Best regards,
Krzysztof