[PATCH 1/3] dt-bindings: gpio: add schema for NXP S32G2/S32G3 SoCs

[Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>]

Add the DT schema for the GPIO driver of the NXP S32G2/S32G3 SoCs.

Signed-off-by: Phu Luu An <phu.luuan@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
---
 .../bindings/gpio/nxp,gpio-siul2-s32g2.yaml   | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/nxp,gpio-siul2-s32g2.yaml

diff --git a/Documentation/devicetree/bindings/gpio/nxp,gpio-siul2-s32g2.yaml b/Documentation/devicetree/bindings/gpio/nxp,gpio-siul2-s32g2.yaml
new file mode 100644
index 000000000000..fba41a18d4c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nxp,gpio-siul2-s32g2.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
+# Copyright 2024 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nxp,gpio-siul2-s32g2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32G2 SIUL2 GPIO controller
+
+maintainers:
+  - Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
+  - Larisa Grigore <larisa.grigore@nxp.com>
+  - Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
+
+description: |
+  Support for the SIUL2 GPIOs found on the S32G2 and S32G3
+  chips. It includes an IRQ controller for all pins which have
+  an EIRQ associated.
+
+properties:
+  compatible:
+    items:
+      - const: nxp,s32g2-siul2-gpio
+
+  reg:
+    description: |
+      A list of register regions for configuring interrupts,
+      GPIO output values and reading GPIO input values.
+    items:
+      - description: PGPDO (output value) registers for SIUL2_0
+      - description: PGPDO (output value) registers for SIUL2_1
+      - description: PGPDI (input value) registers for SIUL2_0
+      - description: PGPDI (input value) registers for SIUL2_1
+      - description: EIRQ (interrupt) configuration registers from SIUL2_1
+      - description: EIRQ IMCR registers for interrupt muxing between pads
+
+  reg-names:
+    items:
+      - const: opads0
+      - const: opads1
+      - const: ipads0
+      - const: ipads1
+      - const: eirqs
+      - const: eirq-imcrs
+
+  interrupts:
+    description:
+      The port interrupt shared by all 32 EIRQs.
+
+  gpio-controller:
+    description:
+      Marks the device node as a gpio controller
+
+  "#gpio-cells":
+    description: |
+      Should be two. The first cell is the pin number and
+      the second cell is used to specify the gpio polarity
+      0 = active high
+      1 = active low
+
+  interrupt-controller:
+    description:
+      Marks the device node as an interrupt controller
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      Refer to ../interrupt-controller/interrupts.txt for more details.
+
+  gpio-ranges:
+    description:
+      Interaction with the PINCTRL subsystem
+      Refer to gpio.txt for more details.
+
+  gpio-reserved-ranges:
+    description:
+      A list of start GPIO and number of GPIO pairs which are unusable.
+      Refer to gpio.txt for more details.
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    additionalProperties: false
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+    required:
+      - gpio-hog
+      - gpios
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio: siul2-gpio@4009d700 {
+        compatible = "nxp,s32g2-siul2-gpio";
+        reg = <0x4009d700 0x10>,
+              <0x44011700 0x18>,
+              <0x4009d740 0x10>,
+              <0x44011740 0x18>,
+              <0x44010010 0xb4>,
+              <0x44011078 0x80>;
+        reg-names = "opads0", "opads1", "ipads0",
+                    "ipads1", "eirqs", "eirq-imcrs";
+        gpio-controller;
+        #gpio-cells = <2>;
+                      /* GPIO 0-101 */
+        gpio-ranges = <&pinctrl 0   0   102>,
+                      /* GPIO 112-190 */
+                      <&pinctrl 112 112 79>;
+        gpio-reserved-ranges = <102 10>, <123 21>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+        status = "okay";
+    };
-- 
2.45.2