From: Frank Wunderlich <linux@fw-web.de>
To: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Sean Wang <sean.wang@kernel.org>
Cc: Frank Wunderlich <frank-w@public-files.de>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, daniel@makrotopia.org,
john@phrozen.org, ansuelsmth@gmail.com, eladwf@gmail.com
Subject: [PATCH v2 4/4] arm64: dts: mediatek: mt7988: add pinctrl support
Date: Sun, 6 Oct 2024 12:08:40 +0200 [thread overview]
Message-ID: <20241006100843.13280-5-linux@fw-web.de> (raw)
In-Reply-To: <20241006100843.13280-1-linux@fw-web.de>
From: Frank Wunderlich <frank-w@public-files.de>
Add mt7988a pinctrl node.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v2:
- fix wrong alignment of reg values
---
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 241 ++++++++++++++++++++++
1 file changed, 241 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index c9649b815276..7e15934efe0b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/clock/mediatek,mt7988-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mt65xx.h>
/ {
compatible = "mediatek,mt7988a";
@@ -105,6 +106,246 @@ clock-controller@1001e000 {
#clock-cells = <1>;
};
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7988-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c10000 0 0x1000>,
+ <0 0x11d00000 0 0x1000>,
+ <0 0x11d20000 0 0x1000>,
+ <0 0x11e00000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_tr",
+ "iocfg_br", "iocfg_rb",
+ "iocfg_lb", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 84>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+
+ mdio0_pins: mdio0-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio0";
+ };
+
+ conf {
+ pins = "SMI_0_MDC", "SMI_0_MDIO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ };
+ };
+
+ i2c0_pins: i2c0-g0-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c0_1";
+ };
+ };
+
+ i2c1_pins: i2c1-g0-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_0";
+ };
+ };
+
+ i2c1_sfp_pins: i2c1-sfp-g0-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_sfp";
+ };
+ };
+
+ i2c2_0_pins: i2c2-g0-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c2_0";
+ };
+ };
+
+ i2c2_1_pins: i2c2-g1-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c2_1";
+ };
+ };
+
+ gbe0_led0_pins: gbe0-led0-pins {
+ mux {
+ function = "led";
+ groups = "gbe0_led0";
+ };
+ };
+
+ gbe1_led0_pins: gbe1-led0-pins {
+ mux {
+ function = "led";
+ groups = "gbe1_led0";
+ };
+ };
+
+ gbe2_led0_pins: gbe2-led0-pins {
+ mux {
+ function = "led";
+ groups = "gbe2_led0";
+ };
+ };
+
+ gbe3_led0_pins: gbe3-led0-pins {
+ mux {
+ function = "led";
+ groups = "gbe3_led0";
+ };
+ };
+
+ gbe0_led1_pins: gbe0-led1-pins {
+ mux {
+ function = "led";
+ groups = "gbe0_led1";
+ };
+ };
+
+ gbe1_led1_pins: gbe1-led1-pins {
+ mux {
+ function = "led";
+ groups = "gbe1_led1";
+ };
+ };
+
+ gbe2_led1_pins: gbe2-led1-pins {
+ mux {
+ function = "led";
+ groups = "gbe2_led1";
+ };
+ };
+
+ gbe3_led1_pins: gbe3-led1-pins {
+ mux {
+ function = "led";
+ groups = "gbe3_led1";
+ };
+ };
+
+ i2p5gbe_led0_pins: 2p5gbe-led0-pins {
+ mux {
+ function = "led";
+ groups = "2p5gbe_led0";
+ };
+ };
+
+ i2p5gbe_led1_pins: 2p5gbe-led1-pins {
+ mux {
+ function = "led";
+ groups = "2p5gbe_led1";
+ };
+ };
+
+ mmc0_pins_emmc_45: mmc0-emmc-45-pins {
+ mux {
+ function = "flash";
+ groups = "emmc_45";
+ };
+ };
+
+ mmc0_pins_emmc_51: mmc0-emmc-51-pins {
+ mux {
+ function = "flash";
+ groups = "emmc_51";
+ };
+ };
+
+ mmc0_pins_sdcard: mmc0-sdcard-pins {
+ mux {
+ function = "flash";
+ groups = "sdcard";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0";
+ };
+ };
+
+ snfi_pins: snfi-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ spi0_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0";
+ };
+ };
+
+ spi0_flash_pins: spi0-flash-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ };
+
+ spi1_pins: spi1-pins {
+ mux {
+ function = "spi";
+ groups = "spi1";
+ };
+ };
+
+ spi2_pins: spi2-pins {
+ mux {
+ function = "spi";
+ groups = "spi2";
+ };
+ };
+
+ spi2_flash_pins: spi2-flash-pins {
+ mux {
+ function = "spi";
+ groups = "spi2", "spi2_wp_hold";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_2l_0_pereset", "pcie_clk_req_n0_0",
+ "pcie_wake_n0_0";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_2l_1_pereset", "pcie_clk_req_n1",
+ "pcie_wake_n1_0";
+ };
+ };
+
+ pcie2_pins: pcie2-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_1l_0_pereset", "pcie_clk_req_n2_0",
+ "pcie_wake_n2_0";
+ };
+ };
+
+ pcie3_pins: pcie3-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_1l_1_pereset", "pcie_clk_req_n3",
+ "pcie_wake_n3_0";
+ };
+ };
+ };
+
pwm@10048000 {
compatible = "mediatek,mt7988-pwm";
reg = <0 0x10048000 0 0x1000>;
--
2.43.0
prev parent reply other threads:[~2024-10-06 10:09 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-06 10:08 [PATCH v2 0/4] Add pinctrl support for mt7988 Frank Wunderlich
2024-10-06 10:08 ` [PATCH v2 1/4] pinctrl: mediatek: add support for MTK_PULL_PD_TYPE Frank Wunderlich
2024-10-06 10:08 ` [PATCH v2 2/4] pinctrl: mediatek: add MT7988 pinctrl driver Frank Wunderlich
2024-10-06 10:08 ` [PATCH v2 3/4] dt-bindings: pinctrl: add binding for MT7988 SoC Frank Wunderlich
2024-10-06 10:08 ` Frank Wunderlich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241006100843.13280-5-linux@fw-web.de \
--to=linux@fw-web.de \
--cc=angelogioacchino.delregno@collabora.com \
--cc=ansuelsmth@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@makrotopia.org \
--cc=devicetree@vger.kernel.org \
--cc=eladwf@gmail.com \
--cc=frank-w@public-files.de \
--cc=john@phrozen.org \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=sean.wang@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).