From: Nick Chan <towinchenmi@gmail.com>
To: Hector Martin <marcan@marcan.st>, Sven Peter <sven@svenpeter.dev>,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
Mark Kettenis <kettenis@openbsd.org>,
asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-watchdog@vger.kernel.org
Cc: Konrad Dybcio <konradybcio@kernel.org>,
Markuss Broks <markuss.broks@gmail.com>,
Nick Chan <towinchenmi@gmail.com>
Subject: [PATCH v6 14/20] arm64: dts: apple: Add A8X devices
Date: Mon, 7 Oct 2024 15:05:39 +0800 [thread overview]
Message-ID: <20241007070758.9961-15-towinchenmi@gmail.com> (raw)
In-Reply-To: <20241007070758.9961-1-towinchenmi@gmail.com>
From: Konrad Dybcio <konradybcio@kernel.org>
Add DTS files for the A8X SoC and the only device based on it, the iPad
Air 2.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Markuss: System memory bits]
Co-developed-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
[Nick: SMP, m1n1 and gpio-keys support, pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
---
arch/arm64/boot/dts/apple/Makefile | 2 +
arch/arm64/boot/dts/apple/t7001-air2.dtsi | 74 +++++++++++++
arch/arm64/boot/dts/apple/t7001-j81.dts | 14 +++
arch/arm64/boot/dts/apple/t7001-j82.dts | 14 +++
arch/arm64/boot/dts/apple/t7001.dtsi | 123 ++++++++++++++++++++++
5 files changed, 227 insertions(+)
create mode 100644 arch/arm64/boot/dts/apple/t7001-air2.dtsi
create mode 100644 arch/arm64/boot/dts/apple/t7001-j81.dts
create mode 100644 arch/arm64/boot/dts/apple/t7001-j82.dts
create mode 100644 arch/arm64/boot/dts/apple/t7001.dtsi
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
index d5dd1e2e4f4c..adda522ea490 100644
--- a/arch/arm64/boot/dts/apple/Makefile
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -16,6 +16,8 @@ dtb-$(CONFIG_ARCH_APPLE) += t7000-j97.dtb
dtb-$(CONFIG_ARCH_APPLE) += t7000-n102.dtb
dtb-$(CONFIG_ARCH_APPLE) += t7000-n56.dtb
dtb-$(CONFIG_ARCH_APPLE) += t7000-n61.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7001-j81.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t7001-j82.dtb
dtb-$(CONFIG_ARCH_APPLE) += t8103-j274.dtb
dtb-$(CONFIG_ARCH_APPLE) += t8103-j293.dtb
dtb-$(CONFIG_ARCH_APPLE) += t8103-j313.dtb
diff --git a/arch/arm64/boot/dts/apple/t7001-air2.dtsi b/arch/arm64/boot/dts/apple/t7001-air2.dtsi
new file mode 100644
index 000000000000..19fabd425c52
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-air2.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air 2 common device tree
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+#include "t7001.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ chassis-type = "tablet";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "serial0";
+
+ framebuffer0: framebuffer@0 {
+ compatible = "apple,simple-framebuffer", "simple-framebuffer";
+ reg = <0 0 0 0>; /* To be filled by loader */
+ /* Format properties will be added by loader */
+ status = "disabled";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-home {
+ label = "Home Button";
+ gpios = <&pinctrl 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ wakeup-source;
+ };
+
+ button-power {
+ label = "Power Button";
+ gpios = <&pinctrl 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ button-volup {
+ label = "Volume Up";
+ gpios = <&pinctrl 92 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ button-voldown {
+ label = "Volume Down";
+ gpios = <&pinctrl 93 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ memory@800000000 {
+ device_type = "memory";
+ reg = <0x8 0 0 0>; /* To be filled by loader */
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* To be filled by loader */
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t7001-j81.dts b/arch/arm64/boot/dts/apple/t7001-j81.dts
new file mode 100644
index 000000000000..ca90dc0c872c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-j81.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air 2 (Wi-Fi), J81, iPad5,3 (A1566)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7001-air2.dtsi"
+
+/ {
+ compatible = "apple,j81", "apple,t7001", "apple,arm-platform";
+ model = "Apple iPad Air 2 (Wi-Fi)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7001-j82.dts b/arch/arm64/boot/dts/apple/t7001-j82.dts
new file mode 100644
index 000000000000..d9fd16f48db7
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001-j82.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple iPad Air 2 (Cellular), J82, iPad5,4 (A1567)
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "t7001-air2.dtsi"
+
+/ {
+ compatible = "apple,j82", "apple,t7001", "apple,arm-platform";
+ model = "Apple iPad Air 2 (Cellular)";
+};
diff --git a/arch/arm64/boot/dts/apple/t7001.dtsi b/arch/arm64/boot/dts/apple/t7001.dtsi
new file mode 100644
index 000000000000..a76e034c85e3
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t7001.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T7001 "A8X" SoC
+ *
+ * Copyright (c) 2022, Konrad Dybcio <konradybcio@kernel.org>
+ * Based on Asahi Linux's M1 (t8103.dtsi) and Corellium's A10 efforts.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+
+/ {
+ interrupt-parent = <&aic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &serial0;
+ };
+
+ clkref: clock-ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "clkref";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "apple,typhoon";
+ reg = <0x0 0x0>;
+ cpu-release-addr = <0 0>; /* To be filled in by loader */
+ enable-method = "spin-table";
+ device_type = "cpu";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "apple,typhoon";
+ reg = <0x0 0x1>;
+ cpu-release-addr = <0 0>; /* To be filled in by loader */
+ enable-method = "spin-table";
+ device_type = "cpu";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "apple,typhoon";
+ reg = <0x0 0x2>;
+ cpu-release-addr = <0 0>; /* To be filled by loader */
+ enable-method = "spin-table";
+ device_type = "cpu";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ nonposted-mmio;
+ ranges;
+
+ serial0: serial@20a0c0000 {
+ compatible = "apple,s5l-uart";
+ reg = <0x2 0x0a0c0000 0x0 0x4000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 158 IRQ_TYPE_LEVEL_HIGH>;
+ /* Use the bootloader-enabled clocks for now. */
+ clocks = <&clkref>, <&clkref>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ wdt: watchdog@20e027000 {
+ compatible = "apple,t7000-wdt", "apple,wdt";
+ reg = <0x2 0x0e027000 0x0 0x1000>;
+ clocks = <&clkref>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ aic: interrupt-controller@20e100000 {
+ compatible = "apple,t7000-aic", "apple,aic";
+ reg = <0x2 0x0e100000 0x0 0x100000>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ };
+
+ pinctrl: pinctrl@20e300000 {
+ compatible = "apple,t7000-pinctrl", "apple,pinctrl";
+ reg = <0x2 0x0e300000 0x0 0x100000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 184>;
+ apple,npins = <184>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 62 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 63 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 64 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 65 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&aic>;
+ interrupt-names = "phys", "virt";
+ /* Note that A8X doesn't actually have a hypervisor (EL2 is not implemented). */
+ interrupts = <AIC_FIQ AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_FIQ AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
--
2.46.2
next prev parent reply other threads:[~2024-10-07 7:09 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-07 7:05 [PATCH v6 00/20] Initial device trees for A7-A11 based Apple devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 01/20] dt-bindings: arm: cpus: Add Apple A7-A11 CPU cores Nick Chan
2024-10-07 7:05 ` [PATCH v6 02/20] dt-bindings: watchdog: apple,wdt: Add A7-A11 compatibles Nick Chan
2024-10-07 7:05 ` [PATCH v6 03/20] dt-bindings: pinctrl: apple,pinctrl: " Nick Chan
2024-10-07 7:05 ` [PATCH v6 04/20] dt-bindings: arm: apple: Add A7 devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 05/20] dt-bindings: arm: apple: Add A8 devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 06/20] dt-bindings: arm: apple: Add A8X devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 07/20] dt-bindings: arm: apple: Add A9 devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 08/20] dt-bindings: arm: apple: Add A9X devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 09/20] dt-bindings: arm: apple: Add A10 devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 10/20] dt-bindings: arm: apple: Add A10X devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 11/20] dt-bindings: arm: apple: Add A11 devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 12/20] arm64: dts: apple: Add A7 devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 13/20] arm64: dts: apple: Add A8 devices Nick Chan
2024-10-07 7:05 ` Nick Chan [this message]
2024-10-07 7:05 ` [PATCH v6 15/20] arm64: dts: apple: Add A9 devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 16/20] arm64: dts: apple: Add A9X devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 17/20] arm64: dts: apple: Add A10 devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 18/20] arm64: dts: apple: Add A10X devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 19/20] arm64: dts: apple: Add A11 devices Nick Chan
2024-10-07 7:05 ` [PATCH v6 20/20] arm64: Kconfig: Update help text for CONFIG_ARCH_APPLE Nick Chan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241007070758.9961-15-towinchenmi@gmail.com \
--to=towinchenmi@gmail.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kettenis@openbsd.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lpieralisi@kernel.org \
--cc=marcan@marcan.st \
--cc=markuss.broks@gmail.com \
--cc=robh@kernel.org \
--cc=sven@svenpeter.dev \
--cc=will@kernel.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).