From: Kim Seer Paller <kimseer.paller@analog.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Kim Seer Paller <kimseer.paller@analog.com>
Subject: [PATCH v2 1/2] dt-bindings: gpio: add adg1414
Date: Thu, 13 Feb 2025 21:15:09 +0800 [thread overview]
Message-ID: <20250213-for_upstream-v2-1-ec4eff3b3cd5@analog.com> (raw)
In-Reply-To: <20250213-for_upstream-v2-0-ec4eff3b3cd5@analog.com>
The ADG1414 is a 9.5 Ω RON ±15 V/+12 V/±5 V iCMOS Serially-Controlled
Octal SPST Switches.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
---
.../devicetree/bindings/gpio/adi,adg1414-gpio.yaml | 68 ++++++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 74 insertions(+)
diff --git a/Documentation/devicetree/bindings/gpio/adi,adg1414-gpio.yaml b/Documentation/devicetree/bindings/gpio/adi,adg1414-gpio.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..2c91175d3c7e0a030a894953abfad003ace23744
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/adi,adg1414-gpio.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/adi,adg1414-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADG1414 Serially-Controlled Octal SPST Switches
+
+maintainers:
+ - Kim Seer Paller <kimseer.paller@analog.com>
+
+description:
+ The ADG1414 is a 9.5 Ω RON ±15 V/+12 V/±5 V iCMOS serially-controlled
+ octal SPST switches.
+
+properties:
+ compatible:
+ enum:
+ - adi,adg14140-gpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ spi-cpha: true
+
+ reset-gpios:
+ description: RESET/Logic Power Supply Input (VL). When the RESET/VL pin is
+ low, all switches are off and the appropriate registers are cleared to 0.
+ maxItems: 1
+
+ '#daisy-chained-devices':
+ description: The number of daisy-chained devices.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ minimum: 1
+ maximum: 4
+
+required:
+ - compatible
+ - reg
+ - spi-cpha
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@0 {
+ compatible = "adi,adg14140-gpio";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ reset-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 25c86f47353de25c88291cc7fd6c4e9bfb12d5c4..66d92be0f57daa9eabb48d7e53b6b2bea0c40863 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -498,6 +498,12 @@ W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/net/ieee802154/adf7242.txt
F: drivers/net/ieee802154/adf7242.c
+ADG1414 SPST Switch Driver
+M: Kim Seer Paller <kimseer.paller@analog.com>
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/gpio/gpio-adg1414.yaml
+
ADM1025 HARDWARE MONITOR DRIVER
M: Jean Delvare <jdelvare@suse.com>
L: linux-hwmon@vger.kernel.org
--
2.34.1
next prev parent reply other threads:[~2025-02-13 13:17 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-13 13:15 [PATCH v2 0/2] Add support for ADG1414 Serially-Controlled Octal SPST Switches Kim Seer Paller
2025-02-13 13:15 ` Kim Seer Paller [this message]
2025-02-13 16:11 ` [PATCH v2 1/2] dt-bindings: gpio: add adg1414 kernel test robot
2025-02-13 18:16 ` Krzysztof Kozlowski
2025-02-14 10:42 ` Linus Walleij
2025-02-13 13:15 ` [PATCH v2 2/2] gpio: gpio-adg1414: New driver Kim Seer Paller
2025-02-13 23:25 ` Linus Walleij
2025-02-14 13:17 ` Nuno Sá
2025-02-14 23:22 ` Linus Walleij
2025-02-16 14:30 ` Jonathan Cameron
2025-02-17 7:02 ` Paller, Kim Seer
2025-02-17 9:32 ` Nuno Sá
2025-02-27 0:33 ` Linus Walleij
2025-02-15 1:12 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250213-for_upstream-v2-1-ec4eff3b3cd5@analog.com \
--to=kimseer.paller@analog.com \
--cc=brgl@bgdev.pl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).