[PATCH v2 1/6] dt-bindings: pinctrl: Add bindings for BCM21664 pin controller

[Artur Weber <aweber.kernel@gmail.com>]

Add device tree bindings for the pin controller included in the
BCM21664 chip. The bindings are based off brcm,bcm11351-pinctrl.yaml;
both chips use the same driver, but have different pins, and the
BCM21664 has 6 alt modes instead of 4.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changes in v2:
- Drop "property: true" declarations which had no effect with
  "unevaluatedProperties: false"
- Define property limits for I2C pins only instead of standard pins,
  making the pin-specific "if" condition significantly smaller
---
 .../bindings/pinctrl/brcm,bcm21664-pinctrl.yaml    | 138 +++++++++++++++++++++
 1 file changed, 138 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..32b7e44e25900b9873790480b04f2feb9e54be02
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm21664-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM21664 pin controller
+
+maintainers:
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm21664-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-grp[0-9]$':
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          pins:
+            description:
+              Specifies the name(s) of one or more pins to be configured by
+              this node.
+            items:
+              enum: [ adcsyn, batrm, bsc1clk, bsc1dat, camcs0, camcs1, clk32k,
+                      clk_cx8, dclk1, dclk4, dclkreq1, dclkreq4, dmic0clk,
+                      dmic0dq, dsi0te, gpio00, gpio01, gpio02, gpio03, gpio04,
+                      gpio05, gpio06, gpio07, gpio08, gpio09, gpio10, gpio11,
+                      gpio12, gpio13, gpio14, gpio15, gpio16, gpio17, gpio18,
+                      gpio19, gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
+                      gpio26, gpio27, gpio28, gpio32, gpio33, gpio34, gpio93,
+                      gpio94, gps_calreq, gps_hostreq, gps_pablank, gps_tmark,
+                      icusbdm, icusbdp, lcdcs0, lcdres, lcdscl, lcdsda, lcdte,
+                      mdmgpio00, mdmgpio01, mdmgpio02, mdmgpio03, mdmgpio04,
+                      mdmgpio05, mdmgpio06, mdmgpio07, mdmgpio08, mmc0ck,
+                      mmc0cmd, mmc0dat0, mmc0dat1, mmc0dat2, mmc0dat3, mmc0dat4,
+                      mmc0dat5, mmc0dat6, mmc0dat7, mmc0rst, mmc1ck, mmc1cmd,
+                      mmc1dat0, mmc1dat1, mmc1dat2, mmc1dat3, mmc1dat4,
+                      mmc1dat5, mmc1dat6, mmc1dat7, mmc1rst, pc1, pc2, pmbscclk,
+                      pmbscdat, pmuint, resetn, rfst2g_mtsloten3g,
+                      rtxdata2g_txdata3g1, rtxen2g_txdata3g2, rxdata3g0,
+                      rxdata3g1, rxdata3g2, sdck, sdcmd, sddat0, sddat1, sddat2,
+                      sddat3, simclk, simdat, simdet, simrst, spi0clk, spi0fss,
+                      spi0rxd, spi0txd, sri_c, sri_d, sri_e, sspck, sspdi,
+                      sspdo, sspsyn, stat1, stat2, swclktck, swdiotms, sysclken,
+                      tdi, tdo, testmode, traceclk, tracedt00, tracedt01,
+                      tracedt02, tracedt03, tracedt04, tracedt05, tracedt06,
+                      tracedt07, tracedt08, tracedt09, tracedt10, tracedt11,
+                      tracedt12, tracedt13, tracedt14, tracedt15, trstb,
+                      txdata3g0, ubctsn, ubrtsn, ubrx, ubtx ]
+
+          function:
+            description:
+              Specifies the pin mux selection.
+            enum: [ alt1, alt2, alt3, alt4, alt5, alt6 ]
+
+          slew-rate:
+            description: |
+              Meaning depends on configured pin mux:
+                bsc*clk/pmbscclk or bsc*dat/pmbscdat:
+                  0: Standard (100 kbps) & Fast (400 kbps) mode
+                  1: Highspeed (3.4 Mbps) mode
+                Otherwise:
+                  0: fast slew rate
+                  1: normal slew rate
+
+          drive-strength:
+            enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ]
+
+        required:
+          - pins
+
+        allOf:
+          - $ref: pincfg-node.yaml#
+
+          # Limitations for I2C pins
+          - if:
+              properties:
+                pins:
+                  contains:
+                    enum: [ bsc1clk, bsc1dat, gpio16, gpio17, pmbscclk,
+                            pmbscdat ]
+            then:
+              properties:
+                drive-strength: false
+                bias-pull-down: false
+                input-schmitt-enable: false
+                input-schmitt-disable: false
+
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@35004800 {
+      compatible = "brcm,bcm21664-pinctrl";
+      reg = <0x35004800 0x7f0>;
+
+      dev-a-active-pins {
+        /* group node defining 1 standard pin */
+        std-grp0 {
+          pins = "gpio00";
+          function = "alt1";
+          input-schmitt-enable;
+          bias-disable;
+          slew-rate = <1>;
+          drive-strength = <4>;
+        };
+
+        /* group node defining 2 I2C pins */
+        i2c-grp0 {
+          pins = "bsc1clk", "bsc1dat";
+          function = "alt2";
+          bias-pull-up = <720>;
+          input-enable;
+        };
+      };
+    };
+...

-- 
2.48.1