[PATCH v2 0/8] Initial support of MSM8937 and Xiaomi Redmi 3S

[PATCH v2 0/8] Initial support of MSM8937 and Xiaomi Redmi 3S

[Barnabás Czémán]

This patch series add initial support for MSM8937 SoC
and Xiaomi Redmi 3S (land).

The series is extending the MSM8917 gcc and pinctrl drivers
because they are sibling SoCs.
MSM8937 have 4 more A53 cores and have one more dsi port then
MSM8917.
It implements little-big architecture and uses Adreno 505.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
Changes in v2:
- drop applied patches
- drop gcc schema commits infavor of a new schema for gcc-msm8937
- document always on clock for adreno 505/506/510
- msm8937:
  - set cache size
  - rename cpu labels
  - fix style issues addressed by review
- msm8937-xiaom-land:
  - remove unused serial0 alias
  - remove regulator-always-on from pm8937_l6
  - add blue indicator led for aw2013
- Link to v1: https://lore.kernel.org/r/20250211-msm8937-v1-0-7d27ed67f708@mainlining.org

---
Adam Skladowski (1):
      dt-bindings: drm/msm/gpu: Document AON clock for A505/A506/A510

Barnabás Czémán (4):
      dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller
      dt-bindings: iommu: qcom,iommu: Add MSM8937 IOMMU to SMMUv1 compatibles
      dt-bindings: arm: qcom: Add Xiaomi Redmi 3S
      arm64: dts: qcom: Add Xiaomi Redmi 3S

Dang Huynh (2):
      pinctrl: qcom: msm8917: Add MSM8937 wsa_reset pin
      arm64: dts: qcom: Add initial support for MSM8937

Daniil Titov (1):
      clk: qcom: gcc: Add support for Global Clock controller found on MSM8937

 Documentation/devicetree/bindings/arm/qcom.yaml    |    7 +
 .../bindings/clock/qcom,gcc-msm8937.yaml           |   73 +
 .../devicetree/bindings/display/msm/gpu.yaml       |    6 +-
 .../devicetree/bindings/iommu/qcom,iommu.yaml      |    1 +
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts   |  408 ++++
 arch/arm64/boot/dts/qcom/msm8937.dtsi              | 2149 ++++++++++++++++++++
 drivers/clk/qcom/Kconfig                           |    6 +-
 drivers/clk/qcom/gcc-msm8917.c                     |  617 +++++-
 drivers/pinctrl/qcom/Kconfig.msm                   |    4 +-
 drivers/pinctrl/qcom/pinctrl-msm8917.c             |    8 +-
 include/dt-bindings/clock/qcom,gcc-msm8917.h       |   17 +
 12 files changed, 3285 insertions(+), 12 deletions(-)
---
base-commit: d4b0fd87ff0d4338b259dc79b2b3c6f7e70e8afa
change-id: 20250210-msm8937-228ef0dc3ec9

Best regards,
-- 
Barnabás Czémán <barnabas.czeman@mainlining.org>

[PATCH v2 1/8] dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller

[Barnabás Czémán]

Add device tree bindings for the global clock controller on Qualcomm
MSM8937 platform.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 .../bindings/clock/qcom,gcc-msm8937.yaml           | 73 ++++++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-msm8917.h       | 17 +++++
 2 files changed, 90 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8937.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8937.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..c169bc3e350da6da906d90e6632836ba7f591d49
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8937.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8937.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8937
+
+maintainers:
+  - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8937.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8917.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8937
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: DSI phy instance 1 dsi clock
+      - description: DSI phy instance 1 byte clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - '#power-domain-cells'
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gcc: clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8937";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep_clk>,
+               <&dsi0_phy 1>,
+               <&dsi0_phy 0>;
+               <&dsi1_phy 1>,
+               <&dsi1_phy 0>;
+      clock-names = "xo",
+                    "sleep_clk",
+                    "dsi0pll",
+                    "dsi0pllbyte",
+                    "dsi1pll",
+                    "dsi1pllbyte";
+    };
+...
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8917.h b/include/dt-bindings/clock/qcom,gcc-msm8917.h
index 4b421e7414b50bef2e2400f868ae5b7212a427bb..ec1f0b261dd5ccfe4896a00ffa9cf86de98b9cb3 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8917.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8917.h
@@ -170,6 +170,22 @@
 #define VFE1_CLK_SRC				163
 #define VSYNC_CLK_SRC				164
 #define GPLL0_SLEEP_CLK_SRC			165
+#define BLSP1_QUP1_I2C_APPS_CLK_SRC		166
+#define BLSP1_QUP1_SPI_APPS_CLK_SRC		167
+#define BLSP2_QUP4_I2C_APPS_CLK_SRC		168
+#define BLSP2_QUP4_SPI_APPS_CLK_SRC		169
+#define BYTE1_CLK_SRC				170
+#define ESC1_CLK_SRC				171
+#define PCLK1_CLK_SRC				172
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK		173
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK		174
+#define GCC_BLSP2_QUP4_I2C_APPS_CLK		175
+#define GCC_BLSP2_QUP4_SPI_APPS_CLK		176
+#define GCC_MDSS_BYTE1_CLK			177
+#define GCC_MDSS_ESC1_CLK			178
+#define GCC_MDSS_PCLK1_CLK			179
+#define GCC_OXILI_AON_CLK			180
+#define GCC_OXILI_TIMER_CLK			181
 
 /* GCC block resets */
 #define GCC_CAMSS_MICRO_BCR			0
@@ -187,5 +203,6 @@
 #define VENUS_GDSC				5
 #define VFE0_GDSC				6
 #define VFE1_GDSC				7
+#define OXILI_CX_GDSC				8
 
 #endif

-- 
2.48.1

[PATCH v2 2/8] clk: qcom: gcc: Add support for Global Clock controller found on MSM8937

[Barnabás Czémán]

From: Daniil Titov <daniilt971@gmail.com>

Modify existing MSM8917 driver to support MSM8937 SoC. Override frequencies
which are different in this chip. Register all the clocks to the framework
for the clients to be able to request for them. Add new variant of GDSC for
new chip.

Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 drivers/clk/qcom/Kconfig       |   6 +-
 drivers/clk/qcom/gcc-msm8917.c | 617 ++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 616 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d470ed007854c560c476197f9fa52e6406b04ada..dd190290fab22c91910981f21b70bdc15ffa6459 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -316,12 +316,12 @@ config MSM_GCC_8916
 	  SD/eMMC, display, graphics, camera etc.
 
 config MSM_GCC_8917
-	tristate "MSM8917/QM215 Global Clock Controller"
+	tristate "MSM89(17/37)/QM215 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
-	  Support for the global clock controller on msm8917 and qm215
-	  devices.
+	  Support for the global clock controller on msm8917, msm8937
+	  and qm215 devices.
 	  Say Y if you want to use devices such as UART, SPI i2c, USB,
 	  SD/eMMC, display, graphics, camera etc.
 
diff --git a/drivers/clk/qcom/gcc-msm8917.c b/drivers/clk/qcom/gcc-msm8917.c
index 3e2a2ae2ee6e9e647fb68c493ae7b0e49af79968..54b9df0a561084f43942fc50386ccb74cbd40417 100644
--- a/drivers/clk/qcom/gcc-msm8917.c
+++ b/drivers/clk/qcom/gcc-msm8917.c
@@ -37,6 +37,8 @@ enum {
 	DT_SLEEP_CLK,
 	DT_DSI0PLL,
 	DT_DSI0PLL_BYTE,
+	DT_DSI1PLL,
+	DT_DSI1PLL_BYTE,
 };
 
 enum {
@@ -48,6 +50,8 @@ enum {
 	P_GPLL6,
 	P_DSI0PLL,
 	P_DSI0PLL_BYTE,
+	P_DSI1PLL,
+	P_DSI1PLL_BYTE,
 };
 
 static struct clk_alpha_pll gpll0_sleep_clk_src = {
@@ -102,7 +106,11 @@ static const struct pll_vco gpll3_p_vco[] = {
 	{ 700000000, 1400000000, 0 },
 };
 
-static const struct alpha_pll_config gpll3_early_config = {
+static const struct pll_vco gpll3_p_vco_msm8937[] = {
+	{ 525000000, 1066000000, 0 },
+};
+
+static struct alpha_pll_config gpll3_early_config = {
 	.l = 63,
 	.config_ctl_val = 0x4001055b,
 	.early_output_mask = 0,
@@ -273,6 +281,19 @@ static const struct freq_tbl ftbl_blsp_i2c_apps_clk_src[] = {
 	{ }
 };
 
+static struct clk_rcg2 blsp1_qup1_i2c_apps_clk_src = {
+	.cmd_rcgr = 0x0200c,
+	.hid_width = 5,
+	.freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "blsp1_qup1_i2c_apps_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static struct clk_rcg2 blsp1_qup2_i2c_apps_clk_src = {
 	.cmd_rcgr = 0x03000,
 	.hid_width = 5,
@@ -351,6 +372,19 @@ static struct clk_rcg2 blsp2_qup3_i2c_apps_clk_src = {
 	}
 };
 
+static struct clk_rcg2 blsp2_qup4_i2c_apps_clk_src = {
+	.cmd_rcgr = 0x18000,
+	.hid_width = 5,
+	.freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "blsp2_qup4_i2c_apps_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static const struct freq_tbl ftbl_blsp_spi_apps_clk_src[] = {
 	F(960000, P_XO, 10, 1, 2),
 	F(4800000, P_XO, 4, 0, 0),
@@ -362,6 +396,20 @@ static const struct freq_tbl ftbl_blsp_spi_apps_clk_src[] = {
 	{ }
 };
 
+static struct clk_rcg2 blsp1_qup1_spi_apps_clk_src = {
+	.cmd_rcgr = 0x02024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.freq_tbl = ftbl_blsp_spi_apps_clk_src,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "blsp1_qup1_spi_apps_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static struct clk_rcg2 blsp1_qup2_spi_apps_clk_src = {
 	.cmd_rcgr = 0x03014,
 	.hid_width = 5,
@@ -446,6 +494,20 @@ static struct clk_rcg2 blsp2_qup3_spi_apps_clk_src = {
 	}
 };
 
+static struct clk_rcg2 blsp2_qup4_spi_apps_clk_src = {
+	.cmd_rcgr = 0x18024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.freq_tbl = ftbl_blsp_spi_apps_clk_src,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "blsp2_qup4_spi_apps_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static const struct freq_tbl ftbl_blsp_uart_apps_clk_src[] = {
 	F(3686400, P_GPLL0, 1, 72, 15625),
 	F(7372800, P_GPLL0, 1, 144, 15625),
@@ -525,11 +587,19 @@ static struct clk_rcg2 blsp2_uart2_apps_clk_src = {
 static const struct parent_map gcc_byte0_map[] = {
 	{ P_XO, 0 },
 	{ P_DSI0PLL_BYTE, 1 },
+	{ P_DSI1PLL_BYTE, 3 },
+};
+
+static const struct parent_map gcc_byte1_map[] = {
+	{ P_XO, 0 },
+	{ P_DSI0PLL_BYTE, 3 },
+	{ P_DSI1PLL_BYTE, 1 },
 };
 
 static const struct clk_parent_data gcc_byte_data[] = {
 	{ .index = DT_XO },
 	{ .index = DT_DSI0PLL_BYTE },
+	{ .index = DT_DSI1PLL_BYTE },
 };
 
 static struct clk_rcg2 byte0_clk_src = {
@@ -545,6 +615,19 @@ static struct clk_rcg2 byte0_clk_src = {
 	}
 };
 
+static struct clk_rcg2 byte1_clk_src = {
+	.cmd_rcgr = 0x4d0b0,
+	.hid_width = 5,
+	.parent_map = gcc_byte1_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "byte1_clk_src",
+		.parent_data = gcc_byte_data,
+		.num_parents = ARRAY_SIZE(gcc_byte_data),
+		.ops = &clk_byte2_ops,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 static const struct freq_tbl ftbl_camss_gp_clk_src[] = {
 	F(100000000, P_GPLL0, 8, 0, 0),
 	F(160000000, P_GPLL0, 5, 0, 0),
@@ -642,6 +725,17 @@ static const struct freq_tbl ftbl_cpp_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_cpp_clk_src_msm8937[] = {
+	F(133330000, P_GPLL0, 6, 0, 0),
+	F(160000000, P_GPLL0, 5, 0, 0),
+	F(200000000, P_GPLL0, 5, 0, 0),
+	F(266666667, P_GPLL0, 3, 0, 0),
+	F(308570000, P_GPLL6, 3.5, 0, 0),
+	F(320000000, P_GPLL0, 2.5, 0, 0),
+	F(360000000, P_GPLL6, 3, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 cpp_clk_src = {
 	.cmd_rcgr = 0x58018,
 	.hid_width = 5,
@@ -655,6 +749,13 @@ static struct clk_rcg2 cpp_clk_src = {
 	}
 };
 
+static struct clk_init_data vcodec0_clk_src_init_msm8937 = {
+	.name = "vcodec0_clk_src",
+	.parent_data = gcc_cpp_data,
+	.num_parents = ARRAY_SIZE(gcc_cpp_data),
+	.ops = &clk_rcg2_ops,
+};
+
 static const struct freq_tbl ftbl_crypto_clk_src[] = {
 	F(50000000, P_GPLL0, 16, 0, 0),
 	F(80000000, P_GPLL0, 10, 0, 0),
@@ -730,6 +831,13 @@ static const struct freq_tbl ftbl_csi_phytimer_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_csi_phytimer_clk_src_msm8937[] = {
+	F(100000000, P_GPLL0, 8, 0, 0),
+	F(160000000, P_GPLL0, 5, 0, 0),
+	F(200000000, P_GPLL0, 4, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 csi0phytimer_clk_src = {
 	.cmd_rcgr = 0x4e000,
 	.hid_width = 5,
@@ -774,6 +882,19 @@ static struct clk_rcg2 esc0_clk_src = {
 	}
 };
 
+static struct clk_rcg2 esc1_clk_src = {
+	.cmd_rcgr = 0x4d0a8,
+	.hid_width = 5,
+	.freq_tbl = ftbl_esc0_1_clk_src,
+	.parent_map = gcc_xo_gpll0_out_aux_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "esc1_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static const struct parent_map gcc_gfx3d_map[] = {
 	{ P_XO, 0 },
 	{ P_GPLL0, 1 },
@@ -817,6 +938,25 @@ static const struct freq_tbl ftbl_gfx3d_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_gfx3d_clk_src_msm8937[] = {
+	F(19200000, P_XO, 1, 0, 0),
+	F(50000000, P_GPLL0, 16, 0, 0),
+	F(80000000, P_GPLL0, 10, 0, 0),
+	F(100000000, P_GPLL0, 8, 0, 0),
+	F(160000000, P_GPLL0, 5, 0, 0),
+	F(200000000, P_GPLL0, 4, 0, 0),
+	F(216000000, P_GPLL6, 5, 0, 0),
+	F(228570000, P_GPLL0, 3.5, 0, 0),
+	F(240000000, P_GPLL6, 4.5, 0, 0),
+	F(266670000, P_GPLL0, 3, 0, 0),
+	F(300000000, P_GPLL3, 1, 0, 0),
+	F(320000000, P_GPLL0, 2.5, 0, 0),
+	F(375000000, P_GPLL3, 1, 0, 0),
+	F(400000000, P_GPLL0, 2, 0, 0),
+	F(450000000, P_GPLL3, 1, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 gfx3d_clk_src = {
 	.cmd_rcgr = 0x59000,
 	.hid_width = 5,
@@ -973,21 +1113,29 @@ static struct clk_rcg2 mdp_clk_src = {
 	}
 };
 
-static const struct parent_map gcc_pclk_map[] = {
+static const struct parent_map gcc_pclk0_map[] = {
 	{ P_XO, 0 },
 	{ P_DSI0PLL, 1 },
+	{ P_DSI1PLL, 3 },
+};
+
+static const struct parent_map gcc_pclk1_map[] = {
+	{ P_XO, 0 },
+	{ P_DSI0PLL, 3 },
+	{ P_DSI1PLL, 1 },
 };
 
 static const struct clk_parent_data gcc_pclk_data[] = {
 	{ .index = DT_XO },
 	{ .index = DT_DSI0PLL },
+	{ .index = DT_DSI1PLL },
 };
 
 static struct clk_rcg2 pclk0_clk_src = {
 	.cmd_rcgr = 0x4d000,
 	.hid_width = 5,
 	.mnd_width = 8,
-	.parent_map = gcc_pclk_map,
+	.parent_map = gcc_pclk0_map,
 	.clkr.hw.init = &(struct clk_init_data) {
 		.name = "pclk0_clk_src",
 		.parent_data = gcc_pclk_data,
@@ -997,6 +1145,20 @@ static struct clk_rcg2 pclk0_clk_src = {
 	}
 };
 
+static struct clk_rcg2 pclk1_clk_src = {
+	.cmd_rcgr = 0x4d0b8,
+	.hid_width = 5,
+	.mnd_width = 8,
+	.parent_map = gcc_pclk1_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "pclk1_clk_src",
+		.parent_data = gcc_pclk_data,
+		.num_parents = ARRAY_SIZE(gcc_pclk_data),
+		.ops = &clk_pixel_ops,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 static const struct freq_tbl ftbl_pdm2_clk_src[] = {
 	F(64000000, P_GPLL0, 12.5, 0, 0),
 	{ }
@@ -1108,6 +1270,14 @@ static const struct freq_tbl ftbl_usb_hs_system_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_usb_hs_system_clk_src_msm8937[] = {
+	F(57142857, P_GPLL0, 14, 0, 0),
+	F(100000000, P_GPLL0, 8, 0, 0),
+	F(133333333, P_GPLL0, 6, 0, 0),
+	F(177777778, P_GPLL0, 4.5, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 usb_hs_system_clk_src = {
 	.cmd_rcgr = 0x41010,
 	.hid_width = 5,
@@ -1132,6 +1302,15 @@ static const struct freq_tbl ftbl_vcodec0_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_vcodec0_clk_src_msm8937[] = {
+	F(166150000, P_GPLL6, 6.5, 0, 0),
+	F(240000000, P_GPLL6, 4.5, 0, 0),
+	F(308571428, P_GPLL6, 3.5, 0, 0),
+	F(320000000, P_GPLL0, 2.5, 0, 0),
+	F(360000000, P_GPLL6, 3, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 vcodec0_clk_src = {
 	.cmd_rcgr = 0x4c000,
 	.hid_width = 5,
@@ -1160,6 +1339,23 @@ static const struct freq_tbl ftbl_vfe_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_vfe_clk_src_msm8937[] = {
+	F(50000000, P_GPLL0, 16, 0, 0),
+	F(80000000, P_GPLL0, 10, 0, 0),
+	F(100000000, P_GPLL0, 8, 0, 0),
+	F(133333333, P_GPLL0, 6, 0, 0),
+	F(160000000, P_GPLL0, 5, 0, 0),
+	F(177777778, P_GPLL0, 4.5, 0, 0),
+	F(200000000, P_GPLL0, 4, 0, 0),
+	F(266666667, P_GPLL0, 3, 0, 0),
+	F(308571428, P_GPLL6, 3.5, 0, 0),
+	F(320000000, P_GPLL0, 2.5, 0, 0),
+	F(360000000, P_GPLL6, 3, 0, 0),
+	F(400000000, P_GPLL0, 2, 0, 0),
+	F(432000000, P_GPLL6, 2.5, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 vfe0_clk_src = {
 	.cmd_rcgr = 0x58000,
 	.hid_width = 5,
@@ -1269,6 +1465,24 @@ static struct clk_branch gcc_blsp2_ahb_clk = {
 	}
 };
 
+static struct clk_branch gcc_blsp1_qup1_i2c_apps_clk = {
+	.halt_reg = 0x02008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x02008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup1_i2c_apps_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&blsp1_qup1_i2c_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_blsp1_qup2_i2c_apps_clk = {
 	.halt_reg = 0x03010,
 	.halt_check = BRANCH_HALT,
@@ -1377,6 +1591,42 @@ static struct clk_branch gcc_blsp2_qup3_i2c_apps_clk = {
 	}
 };
 
+static struct clk_branch gcc_blsp2_qup4_i2c_apps_clk = {
+	.halt_reg = 0x18020,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x18020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp2_qup4_i2c_apps_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&blsp2_qup4_i2c_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup1_spi_apps_clk = {
+	.halt_reg = 0x02004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x02004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup1_spi_apps_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&blsp1_qup1_spi_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_blsp1_qup2_spi_apps_clk = {
 	.halt_reg = 0x0300c,
 	.halt_check = BRANCH_HALT,
@@ -1485,6 +1735,24 @@ static struct clk_branch gcc_blsp2_qup3_spi_apps_clk = {
 	}
 };
 
+static struct clk_branch gcc_blsp2_qup4_spi_apps_clk = {
+	.halt_reg = 0x1801c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1801c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp2_qup4_spi_apps_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&blsp2_qup4_spi_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_blsp1_uart1_apps_clk = {
 	.halt_reg = 0x0203c,
 	.halt_check = BRANCH_HALT,
@@ -2521,6 +2789,24 @@ static struct clk_branch gcc_mdss_byte0_clk = {
 	}
 };
 
+static struct clk_branch gcc_mdss_byte1_clk = {
+	.halt_reg = 0x4d0a0,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4d0a0,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mdss_byte1_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&byte1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_mdss_esc0_clk = {
 	.halt_reg = 0x4d098,
 	.halt_check = BRANCH_HALT,
@@ -2539,6 +2825,24 @@ static struct clk_branch gcc_mdss_esc0_clk = {
 	}
 };
 
+static struct clk_branch gcc_mdss_esc1_clk = {
+	.halt_reg = 0x4d09c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4d09c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mdss_esc1_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&esc1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_mdss_mdp_clk = {
 	.halt_reg = 0x4d088,
 	.halt_check = BRANCH_HALT,
@@ -2575,6 +2879,24 @@ static struct clk_branch gcc_mdss_pclk0_clk = {
 	}
 };
 
+static struct clk_branch gcc_mdss_pclk1_clk = {
+	.halt_reg = 0x4d0a4,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4d0a4,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mdss_pclk1_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&pclk1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_mdss_vsync_clk = {
 	.halt_reg = 0x4d090,
 	.halt_check = BRANCH_HALT,
@@ -2632,6 +2954,24 @@ static struct clk_branch gcc_oxili_ahb_clk = {
 	}
 };
 
+static struct clk_branch gcc_oxili_aon_clk = {
+	.halt_reg = 0x5904c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x5904c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_oxili_aon_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gfx3d_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_oxili_gfx3d_clk = {
 	.halt_reg = 0x59020,
 	.halt_check = BRANCH_HALT,
@@ -2650,6 +2990,19 @@ static struct clk_branch gcc_oxili_gfx3d_clk = {
 	}
 };
 
+static struct clk_branch gcc_oxili_timer_clk = {
+	.halt_reg = 0x59040,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x59040,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_oxili_timer_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_pdm2_clk = {
 	.halt_reg = 0x4400c,
 	.halt_check = BRANCH_HALT,
@@ -3027,6 +3380,28 @@ static struct gdsc oxili_gx_gdsc = {
 	.flags = CLAMP_IO,
 };
 
+static struct gdsc oxili_gx_gdsc_msm8937 = {
+	.gdscr = 0x5901c,
+	.clamp_io_ctrl = 0x5b00c,
+	.cxcs = (unsigned int []){ 0x59000 },
+	.cxc_count = 1,
+	.pd = {
+		.name = "oxili_gx_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = CLAMP_IO,
+};
+
+static struct gdsc oxili_cx_gdsc = {
+	.gdscr = 0x59044,
+	.cxcs = (unsigned int []){ 0x59020 },
+	.cxc_count = 1,
+	.pd = {
+		.name = "oxili_cx_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
 static struct gdsc cpp_gdsc = {
 	.gdscr = 0x58078,
 	.cxcs = (unsigned int []){ 0x5803c, 0x58064 },
@@ -3207,6 +3582,188 @@ static struct clk_regmap *gcc_msm8917_clocks[] = {
 	[GCC_VFE_TBU_CLK] = &gcc_vfe_tbu_clk.clkr,
 };
 
+static struct clk_regmap *gcc_msm8937_clocks[] = {
+	[GPLL0] = &gpll0.clkr,
+	[GPLL0_EARLY] = &gpll0_early.clkr,
+	[GPLL0_SLEEP_CLK_SRC] = &gpll0_sleep_clk_src.clkr,
+	[GPLL3] = &gpll3.clkr,
+	[GPLL3_EARLY] = &gpll3_early.clkr,
+	[GPLL4] = &gpll4.clkr,
+	[GPLL4_EARLY] = &gpll4_early.clkr,
+	[GPLL6] = &gpll6,
+	[GPLL6_EARLY] = &gpll6_early.clkr,
+	[APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr,
+	[BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
+	[BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr,
+	[BLSP1_QUP2_I2C_APPS_CLK_SRC] = &blsp1_qup2_i2c_apps_clk_src.clkr,
+	[BLSP1_QUP2_SPI_APPS_CLK_SRC] = &blsp1_qup2_spi_apps_clk_src.clkr,
+	[BLSP1_QUP3_I2C_APPS_CLK_SRC] = &blsp1_qup3_i2c_apps_clk_src.clkr,
+	[BLSP1_QUP3_SPI_APPS_CLK_SRC] = &blsp1_qup3_spi_apps_clk_src.clkr,
+	[BLSP1_QUP4_I2C_APPS_CLK_SRC] = &blsp1_qup4_i2c_apps_clk_src.clkr,
+	[BLSP1_QUP4_SPI_APPS_CLK_SRC] = &blsp1_qup4_spi_apps_clk_src.clkr,
+	[BLSP1_UART1_APPS_CLK_SRC] = &blsp1_uart1_apps_clk_src.clkr,
+	[BLSP1_UART2_APPS_CLK_SRC] = &blsp1_uart2_apps_clk_src.clkr,
+	[BLSP2_QUP1_I2C_APPS_CLK_SRC] = &blsp2_qup1_i2c_apps_clk_src.clkr,
+	[BLSP2_QUP1_SPI_APPS_CLK_SRC] = &blsp2_qup1_spi_apps_clk_src.clkr,
+	[BLSP2_QUP2_I2C_APPS_CLK_SRC] = &blsp2_qup2_i2c_apps_clk_src.clkr,
+	[BLSP2_QUP2_SPI_APPS_CLK_SRC] = &blsp2_qup2_spi_apps_clk_src.clkr,
+	[BLSP2_QUP3_I2C_APPS_CLK_SRC] = &blsp2_qup3_i2c_apps_clk_src.clkr,
+	[BLSP2_QUP3_SPI_APPS_CLK_SRC] = &blsp2_qup3_spi_apps_clk_src.clkr,
+	[BLSP2_QUP4_I2C_APPS_CLK_SRC] = &blsp2_qup4_i2c_apps_clk_src.clkr,
+	[BLSP2_QUP4_SPI_APPS_CLK_SRC] = &blsp2_qup4_spi_apps_clk_src.clkr,
+	[BLSP2_UART1_APPS_CLK_SRC] = &blsp2_uart1_apps_clk_src.clkr,
+	[BLSP2_UART2_APPS_CLK_SRC] = &blsp2_uart2_apps_clk_src.clkr,
+	[BYTE0_CLK_SRC] = &byte0_clk_src.clkr,
+	[BYTE1_CLK_SRC] = &byte1_clk_src.clkr,
+	[CAMSS_GP0_CLK_SRC] = &camss_gp0_clk_src.clkr,
+	[CAMSS_GP1_CLK_SRC] = &camss_gp1_clk_src.clkr,
+	[CAMSS_TOP_AHB_CLK_SRC] = &camss_top_ahb_clk_src.clkr,
+	[CCI_CLK_SRC] = &cci_clk_src.clkr,
+	[CPP_CLK_SRC] = &cpp_clk_src.clkr,
+	[CRYPTO_CLK_SRC] = &crypto_clk_src.clkr,
+	[CSI0PHYTIMER_CLK_SRC] = &csi0phytimer_clk_src.clkr,
+	[CSI0_CLK_SRC] = &csi0_clk_src.clkr,
+	[CSI1PHYTIMER_CLK_SRC] = &csi1phytimer_clk_src.clkr,
+	[CSI1_CLK_SRC] = &csi1_clk_src.clkr,
+	[CSI2_CLK_SRC] = &csi2_clk_src.clkr,
+	[ESC0_CLK_SRC] = &esc0_clk_src.clkr,
+	[ESC1_CLK_SRC] = &esc1_clk_src.clkr,
+	[GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr,
+	[GP1_CLK_SRC] = &gp1_clk_src.clkr,
+	[GP2_CLK_SRC] = &gp2_clk_src.clkr,
+	[GP3_CLK_SRC] = &gp3_clk_src.clkr,
+	[JPEG0_CLK_SRC] = &jpeg0_clk_src.clkr,
+	[MCLK0_CLK_SRC] = &mclk0_clk_src.clkr,
+	[MCLK1_CLK_SRC] = &mclk1_clk_src.clkr,
+	[MCLK2_CLK_SRC] = &mclk2_clk_src.clkr,
+	[MDP_CLK_SRC] = &mdp_clk_src.clkr,
+	[PCLK0_CLK_SRC] = &pclk0_clk_src.clkr,
+	[PCLK1_CLK_SRC] = &pclk1_clk_src.clkr,
+	[PDM2_CLK_SRC] = &pdm2_clk_src.clkr,
+	[SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr,
+	[SDCC1_ICE_CORE_CLK_SRC] = &sdcc1_ice_core_clk_src.clkr,
+	[SDCC2_APPS_CLK_SRC] = &sdcc2_apps_clk_src.clkr,
+	[USB_HS_SYSTEM_CLK_SRC] = &usb_hs_system_clk_src.clkr,
+	[VCODEC0_CLK_SRC] = &vcodec0_clk_src.clkr,
+	[VFE0_CLK_SRC] = &vfe0_clk_src.clkr,
+	[VFE1_CLK_SRC] = &vfe1_clk_src.clkr,
+	[VSYNC_CLK_SRC] = &vsync_clk_src.clkr,
+	[GCC_APSS_TCU_CLK] = &gcc_apss_tcu_clk.clkr,
+	[GCC_BIMC_GFX_CLK] = &gcc_bimc_gfx_clk.clkr,
+	[GCC_BIMC_GPU_CLK] = &gcc_bimc_gpu_clk.clkr,
+	[GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
+	[GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP4_I2C_APPS_CLK] = &gcc_blsp1_qup4_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
+	[GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
+	[GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
+	[GCC_BLSP2_AHB_CLK] = &gcc_blsp2_ahb_clk.clkr,
+	[GCC_BLSP2_QUP1_I2C_APPS_CLK] = &gcc_blsp2_qup1_i2c_apps_clk.clkr,
+	[GCC_BLSP2_QUP1_SPI_APPS_CLK] = &gcc_blsp2_qup1_spi_apps_clk.clkr,
+	[GCC_BLSP2_QUP2_I2C_APPS_CLK] = &gcc_blsp2_qup2_i2c_apps_clk.clkr,
+	[GCC_BLSP2_QUP2_SPI_APPS_CLK] = &gcc_blsp2_qup2_spi_apps_clk.clkr,
+	[GCC_BLSP2_QUP3_I2C_APPS_CLK] = &gcc_blsp2_qup3_i2c_apps_clk.clkr,
+	[GCC_BLSP2_QUP3_SPI_APPS_CLK] = &gcc_blsp2_qup3_spi_apps_clk.clkr,
+	[GCC_BLSP2_QUP4_I2C_APPS_CLK] = &gcc_blsp2_qup4_i2c_apps_clk.clkr,
+	[GCC_BLSP2_QUP4_SPI_APPS_CLK] = &gcc_blsp2_qup4_spi_apps_clk.clkr,
+	[GCC_BLSP2_UART1_APPS_CLK] = &gcc_blsp2_uart1_apps_clk.clkr,
+	[GCC_BLSP2_UART2_APPS_CLK] = &gcc_blsp2_uart2_apps_clk.clkr,
+	[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
+	[GCC_CAMSS_AHB_CLK] = &gcc_camss_ahb_clk.clkr,
+	[GCC_CAMSS_CCI_AHB_CLK] = &gcc_camss_cci_ahb_clk.clkr,
+	[GCC_CAMSS_CCI_CLK] = &gcc_camss_cci_clk.clkr,
+	[GCC_CAMSS_CPP_AHB_CLK] = &gcc_camss_cpp_ahb_clk.clkr,
+	[GCC_CAMSS_CPP_CLK] = &gcc_camss_cpp_clk.clkr,
+	[GCC_CAMSS_CSI0PHYTIMER_CLK] = &gcc_camss_csi0phytimer_clk.clkr,
+	[GCC_CAMSS_CSI0PHY_CLK] = &gcc_camss_csi0phy_clk.clkr,
+	[GCC_CAMSS_CSI0PIX_CLK] = &gcc_camss_csi0pix_clk.clkr,
+	[GCC_CAMSS_CSI0RDI_CLK] = &gcc_camss_csi0rdi_clk.clkr,
+	[GCC_CAMSS_CSI0_AHB_CLK] = &gcc_camss_csi0_ahb_clk.clkr,
+	[GCC_CAMSS_CSI0_CLK] = &gcc_camss_csi0_clk.clkr,
+	[GCC_CAMSS_CSI1PHYTIMER_CLK] = &gcc_camss_csi1phytimer_clk.clkr,
+	[GCC_CAMSS_CSI1PHY_CLK] = &gcc_camss_csi1phy_clk.clkr,
+	[GCC_CAMSS_CSI1PIX_CLK] = &gcc_camss_csi1pix_clk.clkr,
+	[GCC_CAMSS_CSI1RDI_CLK] = &gcc_camss_csi1rdi_clk.clkr,
+	[GCC_CAMSS_CSI1_AHB_CLK] = &gcc_camss_csi1_ahb_clk.clkr,
+	[GCC_CAMSS_CSI1_CLK] = &gcc_camss_csi1_clk.clkr,
+	[GCC_CAMSS_CSI2PHY_CLK] = &gcc_camss_csi2phy_clk.clkr,
+	[GCC_CAMSS_CSI2PIX_CLK] = &gcc_camss_csi2pix_clk.clkr,
+	[GCC_CAMSS_CSI2RDI_CLK] = &gcc_camss_csi2rdi_clk.clkr,
+	[GCC_CAMSS_CSI2_AHB_CLK] = &gcc_camss_csi2_ahb_clk.clkr,
+	[GCC_CAMSS_CSI2_CLK] = &gcc_camss_csi2_clk.clkr,
+	[GCC_CAMSS_CSI_VFE0_CLK] = &gcc_camss_csi_vfe0_clk.clkr,
+	[GCC_CAMSS_CSI_VFE1_CLK] = &gcc_camss_csi_vfe1_clk.clkr,
+	[GCC_CAMSS_GP0_CLK] = &gcc_camss_gp0_clk.clkr,
+	[GCC_CAMSS_GP1_CLK] = &gcc_camss_gp1_clk.clkr,
+	[GCC_CAMSS_ISPIF_AHB_CLK] = &gcc_camss_ispif_ahb_clk.clkr,
+	[GCC_CAMSS_JPEG0_CLK] = &gcc_camss_jpeg0_clk.clkr,
+	[GCC_CAMSS_JPEG_AHB_CLK] = &gcc_camss_jpeg_ahb_clk.clkr,
+	[GCC_CAMSS_JPEG_AXI_CLK] = &gcc_camss_jpeg_axi_clk.clkr,
+	[GCC_CAMSS_MCLK0_CLK] = &gcc_camss_mclk0_clk.clkr,
+	[GCC_CAMSS_MCLK1_CLK] = &gcc_camss_mclk1_clk.clkr,
+	[GCC_CAMSS_MCLK2_CLK] = &gcc_camss_mclk2_clk.clkr,
+	[GCC_CAMSS_MICRO_AHB_CLK] = &gcc_camss_micro_ahb_clk.clkr,
+	[GCC_CAMSS_TOP_AHB_CLK] = &gcc_camss_top_ahb_clk.clkr,
+	[GCC_CAMSS_VFE0_AHB_CLK] = &gcc_camss_vfe0_ahb_clk.clkr,
+	[GCC_CAMSS_VFE0_AXI_CLK] = &gcc_camss_vfe0_axi_clk.clkr,
+	[GCC_CAMSS_VFE0_CLK] = &gcc_camss_vfe0_clk.clkr,
+	[GCC_CAMSS_VFE1_AHB_CLK] = &gcc_camss_vfe1_ahb_clk.clkr,
+	[GCC_CAMSS_VFE1_AXI_CLK] = &gcc_camss_vfe1_axi_clk.clkr,
+	[GCC_CAMSS_VFE1_CLK] = &gcc_camss_vfe1_clk.clkr,
+	[GCC_CPP_TBU_CLK] = &gcc_cpp_tbu_clk.clkr,
+	[GCC_CRYPTO_AHB_CLK] = &gcc_crypto_ahb_clk.clkr,
+	[GCC_CRYPTO_AXI_CLK] = &gcc_crypto_axi_clk.clkr,
+	[GCC_CRYPTO_CLK] = &gcc_crypto_clk.clkr,
+	[GCC_DCC_CLK] = &gcc_dcc_clk.clkr,
+	[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+	[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+	[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+	[GCC_JPEG_TBU_CLK] = &gcc_jpeg_tbu_clk.clkr,
+	[GCC_MDP_TBU_CLK] = &gcc_mdp_tbu_clk.clkr,
+	[GCC_MDSS_AHB_CLK] = &gcc_mdss_ahb_clk.clkr,
+	[GCC_MDSS_AXI_CLK] = &gcc_mdss_axi_clk.clkr,
+	[GCC_MDSS_BYTE0_CLK] = &gcc_mdss_byte0_clk.clkr,
+	[GCC_MDSS_BYTE1_CLK] = &gcc_mdss_byte1_clk.clkr,
+	[GCC_MDSS_ESC0_CLK] = &gcc_mdss_esc0_clk.clkr,
+	[GCC_MDSS_ESC1_CLK] = &gcc_mdss_esc1_clk.clkr,
+	[GCC_MDSS_MDP_CLK] = &gcc_mdss_mdp_clk.clkr,
+	[GCC_MDSS_PCLK0_CLK] = &gcc_mdss_pclk0_clk.clkr,
+	[GCC_MDSS_PCLK1_CLK] = &gcc_mdss_pclk1_clk.clkr,
+	[GCC_MDSS_VSYNC_CLK] = &gcc_mdss_vsync_clk.clkr,
+	[GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr,
+	[GCC_MSS_Q6_BIMC_AXI_CLK] = &gcc_mss_q6_bimc_axi_clk.clkr,
+	[GCC_OXILI_AHB_CLK] = &gcc_oxili_ahb_clk.clkr,
+	[GCC_OXILI_AON_CLK] = &gcc_oxili_aon_clk.clkr,
+	[GCC_OXILI_GFX3D_CLK] = &gcc_oxili_gfx3d_clk.clkr,
+	[GCC_OXILI_TIMER_CLK] = &gcc_oxili_timer_clk.clkr,
+	[GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr,
+	[GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr,
+	[GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
+	[GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr,
+	[GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr,
+	[GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
+	[GCC_SDCC1_ICE_CORE_CLK] = &gcc_sdcc1_ice_core_clk.clkr,
+	[GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
+	[GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
+	[GCC_SMMU_CFG_CLK] = &gcc_smmu_cfg_clk.clkr,
+	[GCC_USB2A_PHY_SLEEP_CLK] = &gcc_usb2a_phy_sleep_clk.clkr,
+	[GCC_USB_HS_AHB_CLK] = &gcc_usb_hs_ahb_clk.clkr,
+	[GCC_USB_HS_PHY_CFG_AHB_CLK] = &gcc_usb_hs_phy_cfg_ahb_clk.clkr,
+	[GCC_USB_HS_SYSTEM_CLK] = &gcc_usb_hs_system_clk.clkr,
+	[GCC_VENUS0_AHB_CLK] = &gcc_venus0_ahb_clk.clkr,
+	[GCC_VENUS0_AXI_CLK] = &gcc_venus0_axi_clk.clkr,
+	[GCC_VENUS0_CORE0_VCODEC0_CLK] = &gcc_venus0_core0_vcodec0_clk.clkr,
+	[GCC_VENUS0_VCODEC0_CLK] = &gcc_venus0_vcodec0_clk.clkr,
+	[GCC_VENUS_TBU_CLK] = &gcc_venus_tbu_clk.clkr,
+	[GCC_VFE1_TBU_CLK] = &gcc_vfe1_tbu_clk.clkr,
+	[GCC_VFE_TBU_CLK] = &gcc_vfe_tbu_clk.clkr,
+};
+
 static const struct qcom_reset_map gcc_msm8917_resets[] = {
 	[GCC_CAMSS_MICRO_BCR]		= { 0x56008 },
 	[GCC_MSS_BCR]			= { 0x71000 },
@@ -3234,6 +3791,18 @@ static struct gdsc *gcc_msm8917_gdscs[] = {
 	[VFE1_GDSC] = &vfe1_gdsc,
 };
 
+static struct gdsc *gcc_msm8937_gdscs[] = {
+	[CPP_GDSC] = &cpp_gdsc,
+	[JPEG_GDSC] = &jpeg_gdsc,
+	[MDSS_GDSC] = &mdss_gdsc,
+	[OXILI_GX_GDSC] = &oxili_gx_gdsc_msm8937,
+	[OXILI_CX_GDSC] = &oxili_cx_gdsc,
+	[VENUS_CORE0_GDSC] = &venus_core0_gdsc,
+	[VENUS_GDSC] = &venus_gdsc,
+	[VFE0_GDSC] = &vfe0_gdsc,
+	[VFE1_GDSC] = &vfe1_gdsc,
+};
+
 static const struct qcom_cc_desc gcc_msm8917_desc = {
 	.config = &gcc_msm8917_regmap_config,
 	.clks = gcc_msm8917_clocks,
@@ -3254,6 +3823,41 @@ static const struct qcom_cc_desc gcc_qm215_desc = {
 	.num_gdscs = ARRAY_SIZE(gcc_msm8917_gdscs),
 };
 
+static const struct qcom_cc_desc gcc_msm8937_desc = {
+	.config = &gcc_msm8917_regmap_config,
+	.clks = gcc_msm8937_clocks,
+	.num_clks = ARRAY_SIZE(gcc_msm8937_clocks),
+	.resets = gcc_msm8917_resets,
+	.num_resets = ARRAY_SIZE(gcc_msm8917_resets),
+	.gdscs = gcc_msm8937_gdscs,
+	.num_gdscs = ARRAY_SIZE(gcc_msm8937_gdscs),
+};
+
+static void msm8937_clock_override(void)
+{
+	/* GPLL3 750MHz configuration */
+	gpll3_early_config.l = 47;
+	gpll3_early.vco_table = gpll3_p_vco_msm8937;
+	gpll3_early.num_vco = ARRAY_SIZE(gpll3_p_vco_msm8937);
+
+	/*
+	 * Set below clocks for use specific msm8937 parent map.
+	 */
+	vcodec0_clk_src.parent_map = gcc_cpp_map;
+	vcodec0_clk_src.clkr.hw.init = &vcodec0_clk_src_init_msm8937;
+
+	/*
+	 * Set below clocks for use specific msm8937 freq table.
+	 */
+	vfe0_clk_src.freq_tbl = ftbl_vfe_clk_src_msm8937;
+	vfe1_clk_src.freq_tbl = ftbl_vfe_clk_src_msm8937;
+	cpp_clk_src.freq_tbl = ftbl_cpp_clk_src_msm8937;
+	vcodec0_clk_src.freq_tbl = ftbl_vcodec0_clk_src_msm8937;
+	csi0phytimer_clk_src.freq_tbl = ftbl_csi_phytimer_clk_src_msm8937;
+	csi1phytimer_clk_src.freq_tbl = ftbl_csi_phytimer_clk_src_msm8937;
+	usb_hs_system_clk_src.freq_tbl = ftbl_usb_hs_system_clk_src_msm8937;
+}
+
 static int gcc_msm8917_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
@@ -3261,8 +3865,12 @@ static int gcc_msm8917_probe(struct platform_device *pdev)
 
 	gcc_desc = of_device_get_match_data(&pdev->dev);
 
-	if (gcc_desc == &gcc_qm215_desc)
+	if (gcc_desc == &gcc_qm215_desc) {
 		gfx3d_clk_src.parent_map = gcc_gfx3d_map_qm215;
+	} else if (gcc_desc == &gcc_msm8937_desc) {
+		msm8937_clock_override();
+		gfx3d_clk_src.freq_tbl = ftbl_gfx3d_clk_src_msm8937;
+	}
 
 	regmap = qcom_cc_map(pdev, gcc_desc);
 	if (IS_ERR(regmap))
@@ -3276,6 +3884,7 @@ static int gcc_msm8917_probe(struct platform_device *pdev)
 static const struct of_device_id gcc_msm8917_match_table[] = {
 	{ .compatible = "qcom,gcc-msm8917", .data = &gcc_msm8917_desc },
 	{ .compatible = "qcom,gcc-qm215", .data = &gcc_qm215_desc },
+	{ .compatible = "qcom,gcc-msm8937", .data = &gcc_msm8937_desc },
 	{},
 };
 MODULE_DEVICE_TABLE(of, gcc_msm8917_match_table);

-- 
2.48.1

[PATCH v2 3/8] pinctrl: qcom: msm8917: Add MSM8937 wsa_reset pin

[Barnabás Czémán]

From: Dang Huynh <danct12@riseup.net>

It looks like both 8917 and 8937 are the same except for one pin
"wsa_reset".

Signed-off-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 drivers/pinctrl/qcom/Kconfig.msm       | 4 ++--
 drivers/pinctrl/qcom/pinctrl-msm8917.c | 8 +++++++-
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/qcom/Kconfig.msm b/drivers/pinctrl/qcom/Kconfig.msm
index 35f47660a56b1a730d7724fd5a4fb490da9c7880..a0d63a6725393496e034ca26d218265b7ba4b53f 100644
--- a/drivers/pinctrl/qcom/Kconfig.msm
+++ b/drivers/pinctrl/qcom/Kconfig.msm
@@ -138,10 +138,10 @@ config PINCTRL_MSM8916
 	  Qualcomm TLMM block found on the Qualcomm 8916 platform.
 
 config PINCTRL_MSM8917
-	tristate "Qualcomm 8917 pin controller driver"
+	tristate "Qualcomm 8917/8937 pin controller driver"
 	help
 	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
-	  Qualcomm TLMM block found on the Qualcomm MSM8917 platform.
+	  Qualcomm TLMM block found on the Qualcomm MSM8917, MSM8937 platform.
 
 config PINCTRL_MSM8953
 	tristate "Qualcomm 8953 pin controller driver"
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8917.c b/drivers/pinctrl/qcom/pinctrl-msm8917.c
index cff137bb3b23fbbe2b2630a7cbbf9f46e39981e7..350636807b07d9ab0e207368de63837bc5fa5502 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm8917.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm8917.c
@@ -539,6 +539,7 @@ enum msm8917_functions {
 	msm_mux_webcam_standby,
 	msm_mux_wsa_io,
 	msm_mux_wsa_irq,
+	msm_mux_wsa_reset,
 	msm_mux__,
 };
 
@@ -1123,6 +1124,10 @@ static const char * const wsa_io_groups[] = {
 	"gpio94", "gpio95",
 };
 
+static const char * const wsa_reset_groups[] = {
+	"gpio96",
+};
+
 static const char * const blsp_spi8_groups[] = {
 	"gpio96", "gpio97", "gpio98", "gpio99",
 };
@@ -1378,6 +1383,7 @@ static const struct pinfunction msm8917_functions[] = {
 	MSM_PIN_FUNCTION(webcam_standby),
 	MSM_PIN_FUNCTION(wsa_io),
 	MSM_PIN_FUNCTION(wsa_irq),
+	MSM_PIN_FUNCTION(wsa_reset),
 };
 
 static const struct msm_pingroup msm8917_groups[] = {
@@ -1616,5 +1622,5 @@ static void __exit msm8917_pinctrl_exit(void)
 }
 module_exit(msm8917_pinctrl_exit);
 
-MODULE_DESCRIPTION("Qualcomm msm8917 pinctrl driver");
+MODULE_DESCRIPTION("Qualcomm msm8917/msm8937 pinctrl driver");
 MODULE_LICENSE("GPL");

-- 
2.48.1

[PATCH v2 4/8] dt-bindings: iommu: qcom,iommu: Add MSM8937 IOMMU to SMMUv1 compatibles

[Barnabás Czémán]

Add MSM8937 compatible string with "qcom,msm-iommu-v1" as fallback
for the MSM8937 IOMMU which is compatible with Qualcomm's secure
fw "SMMU v1" implementation.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/iommu/qcom,iommu.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml
index 5ae9a628261fd251c1e991a70662c6d37ef2c4e3..3e5623edd207abbfbd2ba80f51db7829f02eb7b5 100644
--- a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml
@@ -22,6 +22,7 @@ properties:
           - enum:
               - qcom,msm8916-iommu
               - qcom,msm8917-iommu
+              - qcom,msm8937-iommu
               - qcom,msm8953-iommu
           - const: qcom,msm-iommu-v1
       - items:

-- 
2.48.1

[PATCH v2 5/8] dt-bindings: drm/msm/gpu: Document AON clock for A505/A506/A510

[Barnabás Czémán]

From: Adam Skladowski <a39.skl@gmail.com>

Adreno 505 (MSM8937), Adreno 506(MSM8953) and Adreno 510(MSM8976)
require Always-on branch clock to be enabled, describe it.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
[reword commit, move alwayson on the first place]
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/display/msm/gpu.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 6ddc72fd85b04537ea270754a897b4e7eb269641..5028398cc3b517e404a92a2c30688f72eab4c1b3 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -152,11 +152,13 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 7
+          maxItems: 8
 
         clock-names:
           items:
             anyOf:
+              - const: alwayson
+                description: GPU Always-On clock
               - const: core
                 description: GPU Core clock
               - const: iface
@@ -174,7 +176,7 @@ allOf:
               - const: rbcpr
                 description: GPU RB Core Power Reduction clock
           minItems: 2
-          maxItems: 7
+          maxItems: 8
 
       required:
         - clocks

-- 
2.48.1

[PATCH v2 6/8] arm64: dts: qcom: Add initial support for MSM8937

[Barnabás Czémán]

From: Dang Huynh <danct12@riseup.net>

Add initial support for MSM8937 SoC.

Signed-off-by: Dang Huynh <danct12@riseup.net>
Co-developed-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 arch/arm64/boot/dts/qcom/msm8937.dtsi | 2149 +++++++++++++++++++++++++++++++++
 1 file changed, 2149 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8937.dtsi b/arch/arm64/boot/dts/qcom/msm8937.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..7e937708a51df902f522eac372285f6bf2030597
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8937.dtsi
@@ -0,0 +1,2149 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+#include <dt-bindings/clock/qcom,gcc-msm8917.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd0>;
+			power-domain-names = "psci";
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x100000>;
+				cache-unified;
+			};
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd1>;
+			power-domain-names = "psci";
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd2>;
+			power-domain-names = "psci";
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+			power-domains = <&cpu_pd3>;
+			power-domain-names = "psci";
+		};
+
+		cpu-map {
+			/* The MSM8937 has 2 cluster A53 setup. */
+			/* Little Cores */
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			/* Big Cores */
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "standalone-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <125>;
+				exit-latency-us = <180>;
+				min-residency-us = <595>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			cluster_sleep_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				arm,psci-suspend-param = <0x41000053>;
+				entry-latency-us = <700>;
+				exit-latency-us = <1000>;
+				min-residency-us = <6500>;
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		qseecom_mem: reserved@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		rmtfs@92100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x92100000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		adsp_mem: adsp {
+			size = <0x0 0x1100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		wcnss_mem: wcnss {
+			size = <0x0 0x700000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		venus_mem: venus {
+			size = <0x0 0x400000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	cpu_opp_table_c0: opp-table-c0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+		};
+
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+		};
+	};
+
+	cpu_opp_table_c1: opp-table-c1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+		};
+
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+
+		cluster_pd: power-domain-cluster {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&cluster_sleep_0>;
+		};
+
+		cpu_pd0: power-domain-cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd1: power-domain-cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd2: power-domain-cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+
+		cpu_pd3: power-domain-cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&cluster_pd>;
+			domain-idle-states = <&cpu_sleep_0>;
+		};
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8937-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs1 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8937", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8937", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8937-rpmpd", "qcom,msm8917-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs1 13>, <0>, <&apcs1 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0xe3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8937-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@1d8 {
+				reg = <0x1d8 1>;
+				bits = <0 8>;
+			};
+
+			tsens_s5_p1: s5-p1@1d9 {
+				reg = <0x1d9 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p2: s5-p2@1d9 {
+				reg = <0x1d9 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1da {
+				reg = <0x1da 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s6_p2: s6-p2@1db {
+				reg = <0x1db 1>;
+				bits = <2 6>;
+			};
+
+			tsens_s7_p1: s7-p1@1dc {
+				reg = <0x1dc 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@1dc {
+				reg = <0x1dc 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p1: s8-p1@1dd {
+				reg = <0x1dd 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s8_p2: s8-p2@1de {
+				reg = <0x1de 1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@1df {
+				reg = <0x1df 1>;
+				bits = <0 8>;
+			};
+
+			tsens_mode: mode@210 {
+				reg = <0x210 1>;
+				bits = <0 3>;
+			};
+
+			tsens_s0_p1: s0-p1@210 {
+				reg = <0x210 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s0_p2: s0-p2@211 {
+				reg = <0x211 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@211 {
+				reg = <0x211 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@212 {
+				reg = <0x212 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@213 {
+				reg = <0x213 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@214 {
+				reg = <0x214 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@214 {
+				reg = <0x214 2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@215 {
+				reg = <0x215 2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@216 {
+				reg = <0x216 2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@217 {
+				reg = <0x217 1>;
+				bits = <1 6>;
+			};
+
+			tsens_s9_p1: s9-p1@230{
+				reg = <0x230 1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p2: s9-p2@230 {
+				reg = <0x230 2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1: s10-p1@231 {
+				reg = <0x231 2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10-p2@232 {
+				reg = <0x232 1>;
+				bits = <2 6>;
+			};
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x6c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "ahb", "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy", "por";
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8937-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8917-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi3_sleep: blsp1-spi3-sleep-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_spi2_default: blsp2-spi2-default-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			blsp2_spi2_sleep: blsp2-spi2-sleep-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+
+				sdc2_cmd_default: cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <16>;
+				};
+
+				sdc2_data_default: data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <16>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
+			wcnss_pin_a: wcnss-active-state {
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8937";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi1_phy 0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8937", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
+			reg-names = "mdss_phys", "vbif_phys";
+			ranges;
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8937-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi0_opp_table>;
+				power-domains = <&rpmpd MSM8917_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94400 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+						  <&gcc PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>,
+							 <&mdss_dsi1_phy 1>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE1_CLK>,
+					 <&gcc GCC_MDSS_PCLK1_CLK>,
+					 <&gcc GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi1_phy>;
+
+				operating-points-v2 = <&mdss_dsi1_opp_table>;
+				power-domains = <&rpmpd MSM8917_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@1a96a00 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a96a00 0xd4>,
+				      <0x01a96400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-505.0", "qcom,adreno";
+			reg = <0x1c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			#cooling-cells = <2>;
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				<&gcc GCC_OXILI_AHB_CLK>,
+				<&gcc GCC_BIMC_GFX_CLK>,
+				<&gcc GCC_BIMC_GPU_CLK>,
+				<&gcc GCC_OXILI_TIMER_CLK>,
+				<&gcc GCC_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			iommus = <&adreno_smmu 0>;
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-216000000 {
+					opp-hz = /bits/ 64 <216000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+
+				opp-375000000 {
+					opp-hz = /bits/ 64 <375000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+				};
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-supported-hw = <0xFF>;
+					required-opps = <&rpmpd_opp_turbo>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@1c40000 {
+			compatible = "qcom,msm8996-smmu-v2",
+				     "qcom,adreno-smmu",
+				     "qcom,smmu-v2";
+			reg = <0x1c40000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_BIMC_GFX_CLK>, <&gcc GCC_OXILI_AHB_CLK>;
+			clock-names = "bus", "iface";
+
+			power-domains = <&gcc OXILI_CX_GDSC>;
+		};
+
+		apps_iommu: iommu@1e20000 {
+			compatible = "qcom,msm8937-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>, <0x07824000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x500>, <0x07864000 0x800>;
+			reg-names = "hc", "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface", "core", "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default", "sleep";
+			power-domains = <&rpmpd MSM8917_VDDCX>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <12>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_spi3_default>;
+			pinctrl-1 = <&blsp1_spi3_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 10>, <&blsp1_dma 11>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1d000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <10>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_i2c1: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi2: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&blsp2_spi2_default>;
+			pinctrl-1 = <&blsp2_spi2_sleep>;
+			pinctrl-names = "default", "sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu",
+				    "dxe",
+				    "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			power-domains = <&rpmpd MSM8917_VDDCX>,
+					<&rpmpd MSM8917_VDDMX>;
+			power-domain-names = "cx", "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcnss_pin_a>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs1 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx", "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			      <0x0b002000 0x1000>;
+		};
+
+		apcs1: mailbox@b011000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		aoss-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				mdm_core_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				q6_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 4>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss1_alert0>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 7>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 8>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 9>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss0_crit: cpuss0-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 10>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+

-- 
2.48.1

[PATCH v2 7/8] dt-bindings: arm: qcom: Add Xiaomi Redmi 3S

[Barnabás Czémán]

Document Xiaomi Redmi 3S (land).
Add qcom,msm8937 for msm-id, board-id allow-list.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 618a87693ac1dc32b40a2201bc219a4f12e9f3e8..d082c1a2c8b3cdb36caf511840bf217f1175cde8 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -38,6 +38,7 @@ description: |
         msm8660
         msm8916
         msm8917
+        msm8937
         msm8926
         msm8929
         msm8939
@@ -272,6 +273,11 @@ properties:
               - xiaomi,riva
           - const: qcom,msm8917
 
+      - items:
+          - enum:
+              - xiaomi,land
+          - const: qcom,msm8937
+
       - items:
           - enum:
               - motorola,potter
@@ -1222,6 +1228,7 @@ allOf:
               - qcom,apq8094
               - qcom,apq8096
               - qcom,msm8917
+              - qcom,msm8937
               - qcom,msm8939
               - qcom,msm8953
               - qcom,msm8956

-- 
2.48.1

[PATCH v2 8/8] arm64: dts: qcom: Add Xiaomi Redmi 3S

[Barnabás Czémán]

Add initial support for Xiaomi Redmi 3S (land).

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 arch/arm64/boot/dts/qcom/Makefile                |   1 +
 arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts | 408 +++++++++++++++++++++++
 2 files changed, 409 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 140b0b2abfb555b8ef61bd9ed0217d8997800809..18f0c0f7ebadf86a36b02461c02bdba7bfebe397 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -64,6 +64,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8917-xiaomi-riva.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8929-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8937-xiaomi-land.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts
new file mode 100644
index 0000000000000000000000000000000000000000..dce61a14b4152ebd6dc80cb77481c4da2fde126d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Barnabas Czeman
+ */
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "msm8937.dtsi"
+#include "pm8937.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Xiaomi Redmi 3S (land)";
+	compatible = "xiaomi,land", "qcom,msm8937";
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_MSM8937 0x0>;
+	qcom,board-id = <0x1000b 1>, <0x2000b 1>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+		pinctrl-0 = <&speaker_amp_default>;
+		pinctrl-names = "default";
+	};
+
+	headphones_switch: audio-switch {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&tlmm 129 GPIO_ACTIVE_HIGH>;
+		sound-name-prefix = "Headphones Switch";
+		pinctrl-0 = <&headphones_switch_default>;
+		pinctrl-names = "default";
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <4100000>;
+		constant-charge-current-max-microamp = <1000000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@8dd01000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+			power-domains = <&gcc MDSS_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	irled {
+		compatible = "gpio-ir-tx";
+		gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	};
+
+	reserved-memory {
+		reserved@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		framebuffer: memory@8dd01000 {
+			reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc-supply = <&pm8937_l10>;
+		vio-supply = <&pm8937_l5>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			reg = <2>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen@3e {
+		compatible = "edt,edt-ft5306";
+		reg = <0x3e>;
+
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&pm8937_l10>;
+		iovcc-supply = <&pm8937_l5>;
+
+		pinctrl-0 = <&tsp_int_rst_default>;
+		pinctrl-names = "default";
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+	};
+};
+
+&pm8937_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&pm8937_spmi_regulators {
+	/* APC */
+	pm8937_s5: s5 {
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&pmi8950_wled {
+	qcom,num-strings = <2>;
+	qcom,external-pfet;
+	qcom,current-limit-microamp = <20000>;
+	qcom,ovp-millivolt = <29600>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8937-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+
+		vdd_l1_l19-supply = <&pm8937_s3>;
+		vdd_l2_l23-supply = <&pm8937_s3>;
+		vdd_l3-supply = <&pm8937_s3>;
+		vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+		vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
+
+		pm8937_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8937_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8937_s4: s4 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8937_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8937_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l8: l8 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8937_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8937_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8937_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8937_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l19: l19 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8937_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8937_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdc2_cmd_default {
+	drive-strength = <12>;
+};
+
+&sdc2_data_default {
+	drive-strength = <12>;
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8937_l8>;
+	vqmmc-supply = <&pm8937_l5>;
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8937_l11>;
+	vqmmc-supply = <&pm8937_l12>;
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <20 4>;
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	headphones_switch_default: headphones-switch-default-state {
+		pins = "gpio129";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	speaker_amp_default: speaker-amp-default-state {
+		pins = "gpio124";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default: tsp-int-rst-default-state {
+		pins = "gpio64", "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&wcnss {
+	vddpx-supply = <&pm8937_l5>;
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+	vddxo-supply = <&pm8937_l7>;
+	vddrfa-supply = <&pm8937_l19>;
+	vddpa-supply = <&pm8937_l9>;
+	vdddig-supply = <&pm8937_l5>;
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};

-- 
2.48.1

Re: [PATCH v2 1/8] dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller

[Rob Herring (Arm)]

On Sun, 23 Feb 2025 19:57:46 +0100, Barnabás Czémán wrote:
> Add device tree bindings for the global clock controller on Qualcomm
> MSM8937 platform.
> 
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  .../bindings/clock/qcom,gcc-msm8937.yaml           | 73 ++++++++++++++++++++++
>  include/dt-bindings/clock/qcom,gcc-msm8917.h       | 17 +++++
>  2 files changed, 90 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/clock/qcom,gcc-msm8937.example.dts:24.28-29 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.dtbs:131: Documentation/devicetree/bindings/clock/qcom,gcc-msm8937.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1511: dt_binding_check] Error 2
make: *** [Makefile:251: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250223-msm8937-v2-1-b99722363ed3@mainlining.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 4/8] dt-bindings: iommu: qcom,iommu: Add MSM8937 IOMMU to SMMUv1 compatibles

[Rob Herring (Arm)]

On Sun, 23 Feb 2025 19:57:49 +0100, Barnabás Czémán wrote:
> Add MSM8937 compatible string with "qcom,msm-iommu-v1" as fallback
> for the MSM8937 IOMMU which is compatible with Qualcomm's secure
> fw "SMMU v1" implementation.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  Documentation/devicetree/bindings/iommu/qcom,iommu.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250223-msm8937-v2-4-b99722363ed3@mainlining.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 5/8] dt-bindings: drm/msm/gpu: Document AON clock for A505/A506/A510

[Rob Herring (Arm)]

On Sun, 23 Feb 2025 19:57:50 +0100, Barnabás Czémán wrote:
> From: Adam Skladowski <a39.skl@gmail.com>
> 
> Adreno 505 (MSM8937), Adreno 506(MSM8953) and Adreno 510(MSM8976)
> require Always-on branch clock to be enabled, describe it.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> [reword commit, move alwayson on the first place]
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  Documentation/devicetree/bindings/display/msm/gpu.yaml | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250223-msm8937-v2-5-b99722363ed3@mainlining.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 7/8] dt-bindings: arm: qcom: Add Xiaomi Redmi 3S

[Rob Herring (Arm)]

On Sun, 23 Feb 2025 19:57:52 +0100, Barnabás Czémán wrote:
> Document Xiaomi Redmi 3S (land).
> Add qcom,msm8937 for msm-id, board-id allow-list.
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250223-msm8937-v2-7-b99722363ed3@mainlining.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.