Re: [PATCH v2 3/6] dt-bindings: mfd: add max77759 binding

[Rob Herring <robh@kernel.org>]

On Wed, Feb 26, 2025 at 05:51:22PM +0000, André Draszik wrote:
> The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
> includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
> Port Controller (TCPC), NVMEM, and a GPIO expander.
> 
> This describes the top-level device.
> 
> Signed-off-by: André Draszik <andre.draszik@linaro.org>
> 
> ---
> v2:
> * rename expected nvmem subdev nodename to 'nvmem-0'
>   I'd have preferred just 'nvmem', but that matches nvmem-consumer.yaml
>   and fails validation.
> 
> Note: MAINTAINERS doesn't need updating, the binding update for the
> first leaf device (gpio) adds a wildcard matching all max77759 bindings
> ---
>  .../devicetree/bindings/mfd/maxim,max77759.yaml    | 104 +++++++++++++++++++++
>  1 file changed, 104 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77759.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77759.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..87e3737896a289998a18b67932dbccacfb8e3150
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/maxim,max77759.yaml
> @@ -0,0 +1,104 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/maxim,max77759.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Maxim Integrated MAX77759 PMIC for USB Type-C applications
> +
> +maintainers:
> +  - André Draszik <andre.draszik@linaro.org>
> +
> +description: |
> +  This is a part of device tree bindings for the MAX77759 companion Power
> +  Management IC for USB Type-C applications.
> +
> +  The MAX77759 includes Battery Charger, Fuel Gauge, temperature sensors, USB
> +  Type-C Port Controller (TCPC), NVMEM, and a GPIO expander.
> +
> +properties:
> +  compatible:
> +    const: maxim,max77759
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2

Why do you have GPIO properties here and in the child node? Either would 
be valid, but both probably not. Putting them here is actually 
preferred.

> +
> +  gpio:
> +    $ref: /schemas/gpio/maxim,max77759-gpio.yaml