From: Peter Griffin <peter.griffin@linaro.org>
To: Krzysztof Kozlowski <krzk@kernel.org>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, andre.draszik@linaro.org,
tudor.ambarus@linaro.org, willmcvicker@google.com,
semen.protsenko@linaro.org, kernel-team@android.com,
jaewon02.kim@samsung.com,
Peter Griffin <peter.griffin@linaro.org>
Subject: [PATCH v3 2/4] pinctrl: samsung: add dedicated SoC eint suspend/resume callbacks
Date: Thu, 06 Mar 2025 20:42:36 +0000 [thread overview]
Message-ID: <20250306-pinctrl-fltcon-suspend-v3-2-f9ab4ff6a24e@linaro.org> (raw)
In-Reply-To: <20250306-pinctrl-fltcon-suspend-v3-0-f9ab4ff6a24e@linaro.org>
gs101 needs it's own suspend/resume callbacks to use the newly
added eint_fltcon_offset for saving & restoring fltcon0 & fltcon1
registers. It also differs to previous SoCs in that fltcon1
register doesn't always exist for each bank.
exynosautov920 also has dedicated logic for using eint_con_offset
and eint_mask_offset for saving & restoring it's registers.
Refactor the existing platform specific suspend/resume callback
so that each SoC variant has their own callback containing the
SoC specific logic.
Additionally we now call drvdata->suspend() & drvdata->resume()
from within the loop that iterates the banks in
samsung_pinctrl_suspend() and samsung_pinctrl_resume().
This simplifies the logic, and allows us to remove the
clk_enable() and clk_disable() from the callbacks.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
---
Changes since v2:
* Remove useless init (Andre)
* make it clear set_wakeup is conditional on bank->eint_type (Andre)
Changes since v1:
* Split code refactor & gs101 parts into separate patches (Andre)
---
drivers/pinctrl/samsung/pinctrl-exynos-arm64.c | 28 ++--
drivers/pinctrl/samsung/pinctrl-exynos.c | 201 ++++++++++---------------
drivers/pinctrl/samsung/pinctrl-exynos.h | 6 +-
drivers/pinctrl/samsung/pinctrl-samsung.c | 11 +-
drivers/pinctrl/samsung/pinctrl-samsung.h | 8 +-
5 files changed, 109 insertions(+), 145 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index e28fe81776466b693417c66bb15752d609b79eb1..57c98d2451b54b00d50e0e948e272ed53d386c34 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -1112,8 +1112,8 @@ static const struct samsung_pin_ctrl exynosautov920_pin_ctrl[] = {
.pin_banks = exynosautov920_pin_banks0,
.nr_banks = ARRAY_SIZE(exynosautov920_pin_banks0),
.eint_wkup_init = exynos_eint_wkup_init,
- .suspend = exynos_pinctrl_suspend,
- .resume = exynos_pinctrl_resume,
+ .suspend = exynosautov920_pinctrl_suspend,
+ .resume = exynosautov920_pinctrl_resume,
.retention_data = &exynosautov920_retention_data,
}, {
/* pin-controller instance 1 AUD data */
@@ -1124,43 +1124,43 @@ static const struct samsung_pin_ctrl exynosautov920_pin_ctrl[] = {
.pin_banks = exynosautov920_pin_banks2,
.nr_banks = ARRAY_SIZE(exynosautov920_pin_banks2),
.eint_gpio_init = exynos_eint_gpio_init,
- .suspend = exynos_pinctrl_suspend,
- .resume = exynos_pinctrl_resume,
+ .suspend = exynosautov920_pinctrl_suspend,
+ .resume = exynosautov920_pinctrl_resume,
}, {
/* pin-controller instance 3 HSI1 data */
.pin_banks = exynosautov920_pin_banks3,
.nr_banks = ARRAY_SIZE(exynosautov920_pin_banks3),
.eint_gpio_init = exynos_eint_gpio_init,
- .suspend = exynos_pinctrl_suspend,
- .resume = exynos_pinctrl_resume,
+ .suspend = exynosautov920_pinctrl_suspend,
+ .resume = exynosautov920_pinctrl_resume,
}, {
/* pin-controller instance 4 HSI2 data */
.pin_banks = exynosautov920_pin_banks4,
.nr_banks = ARRAY_SIZE(exynosautov920_pin_banks4),
.eint_gpio_init = exynos_eint_gpio_init,
- .suspend = exynos_pinctrl_suspend,
- .resume = exynos_pinctrl_resume,
+ .suspend = exynosautov920_pinctrl_suspend,
+ .resume = exynosautov920_pinctrl_resume,
}, {
/* pin-controller instance 5 HSI2UFS data */
.pin_banks = exynosautov920_pin_banks5,
.nr_banks = ARRAY_SIZE(exynosautov920_pin_banks5),
.eint_gpio_init = exynos_eint_gpio_init,
- .suspend = exynos_pinctrl_suspend,
- .resume = exynos_pinctrl_resume,
+ .suspend = exynosautov920_pinctrl_suspend,
+ .resume = exynosautov920_pinctrl_resume,
}, {
/* pin-controller instance 6 PERIC0 data */
.pin_banks = exynosautov920_pin_banks6,
.nr_banks = ARRAY_SIZE(exynosautov920_pin_banks6),
.eint_gpio_init = exynos_eint_gpio_init,
- .suspend = exynos_pinctrl_suspend,
- .resume = exynos_pinctrl_resume,
+ .suspend = exynosautov920_pinctrl_suspend,
+ .resume = exynosautov920_pinctrl_resume,
}, {
/* pin-controller instance 7 PERIC1 data */
.pin_banks = exynosautov920_pin_banks7,
.nr_banks = ARRAY_SIZE(exynosautov920_pin_banks7),
.eint_gpio_init = exynos_eint_gpio_init,
- .suspend = exynos_pinctrl_suspend,
- .resume = exynos_pinctrl_resume,
+ .suspend = exynosautov920_pinctrl_suspend,
+ .resume = exynosautov920_pinctrl_resume,
},
};
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index ac6dc22b37c98ed5b7fca3335764f19abb2f71cc..f10ff09c1af01c11ff9229aaef77df32eb057b7b 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -761,153 +761,114 @@ __init int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
return 0;
}
-static void exynos_pinctrl_suspend_bank(
- struct samsung_pinctrl_drv_data *drvdata,
- struct samsung_pin_bank *bank)
+static void exynos_set_wakeup(struct samsung_pin_bank *bank)
{
- struct exynos_eint_gpio_save *save = bank->soc_priv;
- const void __iomem *regs = bank->eint_base;
+ struct exynos_irq_chip *irq_chip;
- if (clk_enable(bank->drvdata->pclk)) {
- dev_err(bank->gpio_chip.parent,
- "unable to enable clock for saving state\n");
- return;
+ if (bank->irq_chip) {
+ irq_chip = bank->irq_chip;
+ irq_chip->set_eint_wakeup_mask(bank->drvdata, irq_chip);
}
-
- save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET
- + bank->eint_offset);
- save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
- + 2 * bank->eint_offset);
- save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
- + 2 * bank->eint_offset + 4);
- save->eint_mask = readl(regs + bank->irq_chip->eint_mask
- + bank->eint_offset);
-
- clk_disable(bank->drvdata->pclk);
-
- pr_debug("%s: save con %#010x\n", bank->name, save->eint_con);
- pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0);
- pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1);
- pr_debug("%s: save mask %#010x\n", bank->name, save->eint_mask);
}
-static void exynosauto_pinctrl_suspend_bank(struct samsung_pinctrl_drv_data *drvdata,
- struct samsung_pin_bank *bank)
+void exynos_pinctrl_suspend(struct samsung_pin_bank *bank)
{
struct exynos_eint_gpio_save *save = bank->soc_priv;
const void __iomem *regs = bank->eint_base;
- if (clk_enable(bank->drvdata->pclk)) {
- dev_err(bank->gpio_chip.parent,
- "unable to enable clock for saving state\n");
- return;
- }
-
- save->eint_con = readl(regs + bank->pctl_offset + bank->eint_con_offset);
- save->eint_mask = readl(regs + bank->pctl_offset + bank->eint_mask_offset);
-
- clk_disable(bank->drvdata->pclk);
-
- pr_debug("%s: save con %#010x\n", bank->name, save->eint_con);
- pr_debug("%s: save mask %#010x\n", bank->name, save->eint_mask);
+ if (bank->eint_type == EINT_TYPE_GPIO) {
+ save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET
+ + bank->eint_offset);
+ save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset);
+ save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset + 4);
+ save->eint_mask = readl(regs + bank->irq_chip->eint_mask
+ + bank->eint_offset);
+
+ pr_debug("%s: save con %#010x\n",
+ bank->name, save->eint_con);
+ pr_debug("%s: save fltcon0 %#010x\n",
+ bank->name, save->eint_fltcon0);
+ pr_debug("%s: save fltcon1 %#010x\n",
+ bank->name, save->eint_fltcon1);
+ pr_debug("%s: save mask %#010x\n",
+ bank->name, save->eint_mask);
+ } else if (bank->eint_type == EINT_TYPE_WKUP)
+ exynos_set_wakeup(bank);
}
-void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
+void exynosautov920_pinctrl_suspend(struct samsung_pin_bank *bank)
{
- struct samsung_pin_bank *bank = drvdata->pin_banks;
- struct exynos_irq_chip *irq_chip = NULL;
- int i;
+ struct exynos_eint_gpio_save *save = bank->soc_priv;
+ const void __iomem *regs = bank->eint_base;
- for (i = 0; i < drvdata->nr_banks; ++i, ++bank) {
- if (bank->eint_type == EINT_TYPE_GPIO) {
- if (bank->eint_con_offset)
- exynosauto_pinctrl_suspend_bank(drvdata, bank);
- else
- exynos_pinctrl_suspend_bank(drvdata, bank);
- }
- else if (bank->eint_type == EINT_TYPE_WKUP) {
- if (!irq_chip) {
- irq_chip = bank->irq_chip;
- irq_chip->set_eint_wakeup_mask(drvdata,
- irq_chip);
- }
- }
- }
+ if (bank->eint_type == EINT_TYPE_GPIO) {
+ save->eint_con = readl(regs + bank->pctl_offset +
+ bank->eint_con_offset);
+ save->eint_mask = readl(regs + bank->pctl_offset +
+ bank->eint_mask_offset);
+ pr_debug("%s: save con %#010x\n",
+ bank->name, save->eint_con);
+ pr_debug("%s: save mask %#010x\n",
+ bank->name, save->eint_mask);
+ } else if (bank->eint_type == EINT_TYPE_WKUP)
+ exynos_set_wakeup(bank);
}
-static void exynos_pinctrl_resume_bank(
- struct samsung_pinctrl_drv_data *drvdata,
- struct samsung_pin_bank *bank)
+void exynos_pinctrl_resume(struct samsung_pin_bank *bank)
{
struct exynos_eint_gpio_save *save = bank->soc_priv;
void __iomem *regs = bank->eint_base;
- if (clk_enable(bank->drvdata->pclk)) {
- dev_err(bank->gpio_chip.parent,
- "unable to enable clock for restoring state\n");
- return;
+ if (bank->eint_type == EINT_TYPE_GPIO) {
+ pr_debug("%s: con %#010x => %#010x\n", bank->name,
+ readl(regs + EXYNOS_GPIO_ECON_OFFSET
+ + bank->eint_offset), save->eint_con);
+ pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name,
+ readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset), save->eint_fltcon0);
+ pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name,
+ readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset + 4),
+ save->eint_fltcon1);
+ pr_debug("%s: mask %#010x => %#010x\n", bank->name,
+ readl(regs + bank->irq_chip->eint_mask
+ + bank->eint_offset), save->eint_mask);
+
+ writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET
+ + bank->eint_offset);
+ writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset);
+ writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET
+ + 2 * bank->eint_offset + 4);
+ writel(save->eint_mask, regs + bank->irq_chip->eint_mask
+ + bank->eint_offset);
}
-
- pr_debug("%s: con %#010x => %#010x\n", bank->name,
- readl(regs + EXYNOS_GPIO_ECON_OFFSET
- + bank->eint_offset), save->eint_con);
- pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name,
- readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
- + 2 * bank->eint_offset), save->eint_fltcon0);
- pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name,
- readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET
- + 2 * bank->eint_offset + 4), save->eint_fltcon1);
- pr_debug("%s: mask %#010x => %#010x\n", bank->name,
- readl(regs + bank->irq_chip->eint_mask
- + bank->eint_offset), save->eint_mask);
-
- writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET
- + bank->eint_offset);
- writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET
- + 2 * bank->eint_offset);
- writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET
- + 2 * bank->eint_offset + 4);
- writel(save->eint_mask, regs + bank->irq_chip->eint_mask
- + bank->eint_offset);
-
- clk_disable(bank->drvdata->pclk);
}
-static void exynosauto_pinctrl_resume_bank(struct samsung_pinctrl_drv_data *drvdata,
- struct samsung_pin_bank *bank)
+void exynosautov920_pinctrl_resume(struct samsung_pin_bank *bank)
{
struct exynos_eint_gpio_save *save = bank->soc_priv;
void __iomem *regs = bank->eint_base;
- if (clk_enable(bank->drvdata->pclk)) {
- dev_err(bank->gpio_chip.parent,
- "unable to enable clock for restoring state\n");
- return;
+ if (bank->eint_type == EINT_TYPE_GPIO) {
+ /* exynosautov920 has eint_con_offset for all but one bank */
+ if (!bank->eint_con_offset)
+ exynos_pinctrl_resume(bank);
+
+ pr_debug("%s: con %#010x => %#010x\n", bank->name,
+ readl(regs + bank->pctl_offset + bank->eint_con_offset),
+ save->eint_con);
+ pr_debug("%s: mask %#010x => %#010x\n", bank->name,
+ readl(regs + bank->pctl_offset +
+ bank->eint_mask_offset), save->eint_mask);
+
+ writel(save->eint_con,
+ regs + bank->pctl_offset + bank->eint_con_offset);
+ writel(save->eint_mask,
+ regs + bank->pctl_offset + bank->eint_mask_offset);
}
-
- pr_debug("%s: con %#010x => %#010x\n", bank->name,
- readl(regs + bank->pctl_offset + bank->eint_con_offset), save->eint_con);
- pr_debug("%s: mask %#010x => %#010x\n", bank->name,
- readl(regs + bank->pctl_offset + bank->eint_mask_offset), save->eint_mask);
-
- writel(save->eint_con, regs + bank->pctl_offset + bank->eint_con_offset);
- writel(save->eint_mask, regs + bank->pctl_offset + bank->eint_mask_offset);
-
- clk_disable(bank->drvdata->pclk);
-}
-
-void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
-{
- struct samsung_pin_bank *bank = drvdata->pin_banks;
- int i;
-
- for (i = 0; i < drvdata->nr_banks; ++i, ++bank)
- if (bank->eint_type == EINT_TYPE_GPIO) {
- if (bank->eint_con_offset)
- exynosauto_pinctrl_resume_bank(drvdata, bank);
- else
- exynos_pinctrl_resume_bank(drvdata, bank);
- }
}
static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index 33df21d5c9d61e852834031570d4a0ac0e51f6a4..35c2bc4ea488bda600ebfbda1492f5f49dbd9849 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -221,8 +221,10 @@ struct exynos_muxed_weint_data {
int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d);
int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d);
-void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata);
-void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata);
+void exynosautov920_pinctrl_resume(struct samsung_pin_bank *bank);
+void exynosautov920_pinctrl_suspend(struct samsung_pin_bank *bank);
+void exynos_pinctrl_suspend(struct samsung_pin_bank *bank);
+void exynos_pinctrl_resume(struct samsung_pin_bank *bank);
struct samsung_retention_ctrl *
exynos_retention_init(struct samsung_pinctrl_drv_data *drvdata,
const struct samsung_retention_data *data);
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index 963060920301ec90affb2ee6d758d3d602ffb4a9..375634d8cc79d6533603e3eed562452181e2ee25 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1349,6 +1349,9 @@ static int __maybe_unused samsung_pinctrl_suspend(struct device *dev)
const u8 *widths = bank->type->fld_width;
enum pincfg_type type;
+ if (drvdata->suspend)
+ drvdata->suspend(bank);
+
/* Registers without a powerdown config aren't lost */
if (!widths[PINCFG_TYPE_CON_PDN])
continue;
@@ -1373,8 +1376,6 @@ static int __maybe_unused samsung_pinctrl_suspend(struct device *dev)
clk_disable(drvdata->pclk);
- if (drvdata->suspend)
- drvdata->suspend(drvdata);
if (drvdata->retention_ctrl && drvdata->retention_ctrl->enable)
drvdata->retention_ctrl->enable(drvdata);
@@ -1406,9 +1407,6 @@ static int __maybe_unused samsung_pinctrl_resume(struct device *dev)
return ret;
}
- if (drvdata->resume)
- drvdata->resume(drvdata);
-
for (i = 0; i < drvdata->nr_banks; i++) {
struct samsung_pin_bank *bank = &drvdata->pin_banks[i];
void __iomem *reg = bank->pctl_base + bank->pctl_offset;
@@ -1416,6 +1414,9 @@ static int __maybe_unused samsung_pinctrl_resume(struct device *dev)
const u8 *widths = bank->type->fld_width;
enum pincfg_type type;
+ if (drvdata->resume)
+ drvdata->resume(bank);
+
/* Registers without a powerdown config aren't lost */
if (!widths[PINCFG_TYPE_CON_PDN])
continue;
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 371e4f02bbfb375964b7833beb9bbc098a51f4a3..e939e5bb0347458ae4a9014fd9657fc59c5c3994 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -285,8 +285,8 @@ struct samsung_pin_ctrl {
int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
void (*pud_value_init)(struct samsung_pinctrl_drv_data *drvdata);
- void (*suspend)(struct samsung_pinctrl_drv_data *);
- void (*resume)(struct samsung_pinctrl_drv_data *);
+ void (*suspend)(struct samsung_pin_bank *bank);
+ void (*resume)(struct samsung_pin_bank *bank);
};
/**
@@ -335,8 +335,8 @@ struct samsung_pinctrl_drv_data {
struct samsung_retention_ctrl *retention_ctrl;
- void (*suspend)(struct samsung_pinctrl_drv_data *);
- void (*resume)(struct samsung_pinctrl_drv_data *);
+ void (*suspend)(struct samsung_pin_bank *bank);
+ void (*resume)(struct samsung_pin_bank *bank);
};
/**
--
2.49.0.rc0.332.g42c0ae87b1-goog
next prev parent reply other threads:[~2025-03-06 20:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-06 20:42 [PATCH v3 0/4] samsung: pinctrl: Add support for eint_fltcon_offset and filter selection on gs101 Peter Griffin
2025-03-06 20:42 ` [PATCH v3 1/4] pinctrl: samsung: add support for eint_fltcon_offset Peter Griffin
2025-03-06 20:42 ` Peter Griffin [this message]
2025-03-06 21:15 ` [PATCH v3 2/4] pinctrl: samsung: add dedicated SoC eint suspend/resume callbacks André Draszik
2025-03-06 21:29 ` André Draszik
2025-03-06 20:42 ` [PATCH v3 3/4] pinctrl: samsung: add gs101 specific " Peter Griffin
2025-03-06 21:25 ` André Draszik
2025-03-06 20:42 ` [PATCH v3 4/4] pinctrl: samsung: Add filter selection support for alive bank on gs101 Peter Griffin
2025-03-06 21:24 ` André Draszik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250306-pinctrl-fltcon-suspend-v3-2-f9ab4ff6a24e@linaro.org \
--to=peter.griffin@linaro.org \
--cc=alim.akhtar@samsung.com \
--cc=andre.draszik@linaro.org \
--cc=jaewon02.kim@samsung.com \
--cc=kernel-team@android.com \
--cc=krzk@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=semen.protsenko@linaro.org \
--cc=tudor.ambarus@linaro.org \
--cc=willmcvicker@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).