[RFC PATCH 04/24] dt-bindings: media: i2c: max96717: add support for pinctrl/pinconf

[Cosmin Tanislav <demonsingur@gmail.com>]

MAX96717 is capable of configuring various pin properties.

Add pinctrl/pinconf properties to support this usecase.

Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
---
 .../media/i2c/maxim,max96717-pinctrl.yaml     | 71 +++++++++++++++++++
 .../bindings/media/i2c/maxim,max96717.yaml    | 16 ++++-
 MAINTAINERS                                   |  1 +
 3 files changed, 87 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml
new file mode 100644
index 000000000000..9480d3127643
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96717-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim GMSL2 Serializer Pinctrl
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+allOf:
+  - $ref: /schemas/pinctrl/pincfg-node.yaml#
+  - $ref: /schemas/pinctrl/pinmux-node.yaml#
+
+unevaluatedProperties: false
+
+properties:
+  function: true
+  pins: true
+  drive-open-drain: true
+  drive-push-pull: true
+  bias-disable: true
+  bias-pull-up: true
+  bias-pull-down: true
+  output-disable: true
+  output-enable: true
+  output-low: true
+  output-high: true
+  slew-rate: true
+  input-enable: true
+
+  maxim,jitter-compensation:
+    type: boolean
+    description: Enables jitter compensation.
+
+  maxim,gmsl-tx:
+    type: boolean
+    description: Enable transmitting pin value to GMSL link.
+
+  maxim,gmsl-rx:
+    type: boolean
+    description: Enable receiving pin value from GMSL link.
+
+  maxim,gmsl-tx-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Identifier used while transmitting value to GMSL link.
+      Default value matches the pin number.
+    min: 0
+    max: 31
+
+  maxim,gmsl-rx-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Identifier used while receiving value from GMSL link.
+      Default value matches the pin number.
+    min: 0
+    max: 31
+
+  maxim,rclkout-clock:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Clock value.
+      0 - XTAL / 1 = 25MHz
+      1 - XTAL / 2 = 12.5MHz
+      2 - XTAL / 4 = 6.25MHz
+      3 - Reference PLL output
+    min: 0
+    max: 3
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
index 7d77cc9dcd96..20114c252e01 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
@@ -88,7 +88,21 @@ required:
   - reg
   - ports
 
-additionalProperties: false
+additionalProperties:
+  anyOf:
+    - type: object
+      allOf:
+        - $ref: /schemas/media/i2c/maxim,max96717-pinctrl.yaml#
+
+      unevaluatedProperties: false
+
+    - type: object
+      additionalProperties:
+        type: object
+        allOf:
+          - $ref: /schemas/media/i2c/maxim,max96717-pinctrl.yaml#
+
+        unevaluatedProperties: false
 
 allOf:
   - $ref: /schemas/i2c/i2c-atr.yaml#
diff --git a/MAINTAINERS b/MAINTAINERS
index 8f463ebca056..f8ffb7cff9c5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14201,6 +14201,7 @@ M:	Julien Massot <julien.massot@collabora.com>
 M:	Cosmin Tanislav <cosmin.tanislav@analog.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/maxim,max96717-pinctrl.yaml
 F:	Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
 F:	drivers/media/i2c/max96717.c
 
-- 
2.48.1