Re: [PATCH v8 4/7] can: Add Nuvoton NCT6694 CANFD support

[Marc Kleine-Budde <mkl@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 1512 bytes --]

On 17.03.2025 10:24:11, Ming Yu wrote:
[...]
> > > +     priv->can.clock.freq = can_clk;
> > > +     priv->can.bittiming_const = &nct6694_can_bittiming_nominal_const;
> > > +     priv->can.data_bittiming_const = &nct6694_can_bittiming_data_const;
> > > +     priv->can.do_set_mode = nct6694_can_set_mode;
> > > +     priv->can.do_get_berr_counter = nct6694_can_get_berr_counter;
> > > +     priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
> > > +             CAN_CTRLMODE_LISTENONLY | CAN_CTRLMODE_BERR_REPORTING |
> > > +             CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO;
> >
> > Does your device run in CAN-FD mode all the time? If so, please use
> > can_set_static_ctrlmode() to set it after priv->can.ctrlmode_supported
> > and remove CAN_CTRLMODE_FD from ctrlmode_supported.
> >
> 
> Our device is designed to allow users to dynamically switch between
> Classical CAN and CAN-FD mode via ip link set ... fd on/off.
> Therefore, CAN_CTRLMODE_FD needs to remain in ctrlmode_supported, and
> can_set_static_ctrlmode() is not suitable in this case.
> Please let me know if you have any concerns about this approach.

Where do you evaluate if the user has configured CAN_CTRLMODE_FD or not?

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]