[PATCH 3/7] iio: dac: ad5592r: use new GPIO line value setter callbacks

[Bartosz Golaszewski <brgl@bgdev.pl>]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/iio/dac/ad5592r-base.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c
index bbe3b52c6a12..ad650dcd73a0 100644
--- a/drivers/iio/dac/ad5592r-base.c
+++ b/drivers/iio/dac/ad5592r-base.c
@@ -40,7 +40,8 @@ static int ad5592r_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return !!(val & BIT(offset));
 }
 
-static void ad5592r_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static int ad5592r_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			    int value)
 {
 	struct ad5592r_state *st = gpiochip_get_data(chip);
 
@@ -51,7 +52,7 @@ static void ad5592r_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	else
 		st->gpio_val &= ~BIT(offset);
 
-	st->ops->reg_write(st, AD5592R_REG_GPIO_SET, st->gpio_val);
+	return st->ops->reg_write(st, AD5592R_REG_GPIO_SET, st->gpio_val);
 }
 
 static int ad5592r_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -128,7 +129,7 @@ static int ad5592r_gpio_init(struct ad5592r_state *st)
 	st->gpiochip.direction_input = ad5592r_gpio_direction_input;
 	st->gpiochip.direction_output = ad5592r_gpio_direction_output;
 	st->gpiochip.get = ad5592r_gpio_get;
-	st->gpiochip.set = ad5592r_gpio_set;
+	st->gpiochip.set_rv = ad5592r_gpio_set;
 	st->gpiochip.request = ad5592r_gpio_request;
 	st->gpiochip.owner = THIS_MODULE;
 	st->gpiochip.names = ad5592r_gpio_names;

-- 
2.45.2