[PATCH 7/7] iio: addac: ad74115: use new GPIO line value setter callbacks

[Bartosz Golaszewski <brgl@bgdev.pl>]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/iio/addac/ad74115.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/addac/ad74115.c b/drivers/iio/addac/ad74115.c
index a7e480f2472d..2a809e07526b 100644
--- a/drivers/iio/addac/ad74115.c
+++ b/drivers/iio/addac/ad74115.c
@@ -542,18 +542,16 @@ static int ad74115_gpio_get(struct gpio_chip *gc, unsigned int offset)
 	return FIELD_GET(AD74115_GPIO_CONFIG_GPI_DATA, val);
 }
 
-static void ad74115_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+static int ad74115_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			    int value)
 {
 	struct ad74115_state *st = gpiochip_get_data(gc);
-	struct device *dev = &st->spi->dev;
-	int ret;
 
-	ret = regmap_update_bits(st->regmap, AD74115_GPIO_CONFIG_X_REG(offset),
-				 AD74115_GPIO_CONFIG_GPO_DATA,
-				 FIELD_PREP(AD74115_GPIO_CONFIG_GPO_DATA, value));
-	if (ret)
-		dev_err(dev, "Failed to set GPIO %u output value, err: %d\n",
-			offset, ret);
+	return regmap_update_bits(st->regmap,
+				  AD74115_GPIO_CONFIG_X_REG(offset),
+				  AD74115_GPIO_CONFIG_GPO_DATA,
+				  FIELD_PREP(AD74115_GPIO_CONFIG_GPO_DATA,
+					     value));
 }
 
 static int ad74115_set_comp_debounce(struct ad74115_state *st, unsigned int val)
@@ -1580,7 +1578,7 @@ static int ad74115_setup_gpio_chip(struct ad74115_state *st)
 		.direction_input = ad74115_gpio_direction_input,
 		.direction_output = ad74115_gpio_direction_output,
 		.get = ad74115_gpio_get,
-		.set = ad74115_gpio_set,
+		.set_rv = ad74115_gpio_set,
 	};
 
 	return devm_gpiochip_add_data(dev, &st->gc, st);

-- 
2.45.2