[PATCH 04/10] pinctrl: abx500: use new GPIO line value setter callbacks

[Bartosz Golaszewski <brgl@bgdev.pl>]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/pinctrl/nomadik/pinctrl-abx500.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/nomadik/pinctrl-abx500.c b/drivers/pinctrl/nomadik/pinctrl-abx500.c
index 8cd4ba5cf0bd..2f55f83127cf 100644
--- a/drivers/pinctrl/nomadik/pinctrl-abx500.c
+++ b/drivers/pinctrl/nomadik/pinctrl-abx500.c
@@ -167,14 +167,10 @@ static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return bit;
 }
 
-static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static int abx500_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			   int val)
 {
-	struct abx500_pinctrl *pct = gpiochip_get_data(chip);
-	int ret;
-
-	ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
-	if (ret < 0)
-		dev_err(pct->dev, "%s write failed (%d)\n", __func__, ret);
+	return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
 }
 
 static int abx500_gpio_direction_output(struct gpio_chip *chip,
@@ -540,7 +536,7 @@ static const struct gpio_chip abx500gpio_chip = {
 	.direction_input	= abx500_gpio_direction_input,
 	.get			= abx500_gpio_get,
 	.direction_output	= abx500_gpio_direction_output,
-	.set			= abx500_gpio_set,
+	.set_rv			= abx500_gpio_set,
 	.to_irq			= abx500_gpio_to_irq,
 	.dbg_show		= abx500_gpio_dbg_show,
 };

-- 
2.45.2