[PATCH v2 1/7] dt-bindings: pinctrl: rockchip: increase max amount of device functions

[Nicolas Frattaroli <nicolas.frattaroli@collabora.com>]

With the introduction of the RK3576, the maximum device function ID used
increased to 14, as anyone can easily verify for themselves with:

  rg -g '*-pinctrl.dtsi' '<\d+\s+RK_P..\s+(?<func>\d+)\s.*>;$' --trim \
  -NI -r '$func' arch/arm64/boot/dts/rockchip/ | sort -g | uniq

Unfortunately, this wasn't caught by dt-validate as those pins are
omit-if-no-ref and we had no reference to them in any tree so far.

Once again kick the can down the road by increasing the limit to 14.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
index 960758dc417f7405010fab067bfbf6f5c4704179..125af766b99297dc229db158846daea974dda28e 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -135,7 +135,7 @@ additionalProperties:
               description:
                 Pin bank index.
             - minimum: 0
-              maximum: 13
+              maximum: 14
               description:
                 Mux 0 means GPIO and mux 1 to N means
                 the specific device function.

-- 
2.49.0