linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Walle <mwalle@kernel.org>
To: Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Julien Panis <jpanis@baylibre.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org, Michael Walle <mwalle@kernel.org>
Subject: [PATCH v2 4/7] regulator: tps6594-regulator: remove interrupt_count
Date: Fri, 13 Jun 2025 13:45:15 +0200	[thread overview]
Message-ID: <20250613114518.1772109-5-mwalle@kernel.org> (raw)
In-Reply-To: <20250613114518.1772109-1-mwalle@kernel.org>

In .probe() interrupt_count and nr_types is essentially the same. It
contains the number of different interrupt per LDO or buck converter.
Drop one. This is a preparation patch to further simplify the handling
of different variants of this PMIC.

This patch is only compile-time tested.

Signed-off-by: Michael Walle <mwalle@kernel.org>
---
 drivers/regulator/tps6594-regulator.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/regulator/tps6594-regulator.c b/drivers/regulator/tps6594-regulator.c
index 51264c869aa0..26669f3f1033 100644
--- a/drivers/regulator/tps6594-regulator.c
+++ b/drivers/regulator/tps6594-regulator.c
@@ -577,18 +577,15 @@ static int tps6594_regulator_probe(struct platform_device *pdev)
 	const struct regulator_desc *multi_regs;
 	const struct tps6594_regulator_irq_type **ldos_irq_types;
 	const struct regulator_desc *ldo_regs;
-	size_t interrupt_count;
 
 	if (tps->chip_id == TPS65224) {
 		bucks_irq_types = tps65224_bucks_irq_types;
-		interrupt_count = ARRAY_SIZE(tps65224_buck1_irq_types);
 		multi_regs = tps65224_multi_regs;
 		ldos_irq_types = tps65224_ldos_irq_types;
 		ldo_regs = tps65224_ldo_regs;
 		multi_phase_cnt = ARRAY_SIZE(tps65224_multi_regs);
 	} else {
 		bucks_irq_types = tps6594_bucks_irq_types;
-		interrupt_count = ARRAY_SIZE(tps6594_buck1_irq_types);
 		multi_regs = tps6594_multi_regs;
 		ldos_irq_types = tps6594_ldos_irq_types;
 		ldo_regs = tps6594_ldo_regs;
@@ -686,29 +683,27 @@ static int tps6594_regulator_probe(struct platform_device *pdev)
 
 		error = tps6594_request_reg_irqs(pdev, rdev, irq_data,
 						 bucks_irq_types[buck_idx],
-						 interrupt_count, &irq_idx);
+						 nr_types, &irq_idx);
 		if (error)
 			return error;
 
 		error = tps6594_request_reg_irqs(pdev, rdev, irq_data,
 						 bucks_irq_types[buck_idx + 1],
-						 interrupt_count, &irq_idx);
+						 nr_types, &irq_idx);
 		if (error)
 			return error;
 
 		if (i == MULTI_BUCK123 || i == MULTI_BUCK1234) {
 			error = tps6594_request_reg_irqs(pdev, rdev, irq_data,
 							 tps6594_bucks_irq_types[buck_idx + 2],
-							 interrupt_count,
-							 &irq_idx);
+							 nr_types, &irq_idx);
 			if (error)
 				return error;
 		}
 		if (i == MULTI_BUCK1234) {
 			error = tps6594_request_reg_irqs(pdev, rdev, irq_data,
 							 tps6594_bucks_irq_types[buck_idx + 3],
-							 interrupt_count,
-							 &irq_idx);
+							 nr_types, &irq_idx);
 			if (error)
 				return error;
 		}
@@ -727,7 +722,7 @@ static int tps6594_regulator_probe(struct platform_device *pdev)
 					     "failed to register %s regulator\n", pdev->name);
 
 		error = tps6594_request_reg_irqs(pdev, rdev, irq_data,
-						 bucks_irq_types[i], interrupt_count, &irq_idx);
+						 bucks_irq_types[i], nr_types, &irq_idx);
 		if (error)
 			return error;
 	}
@@ -742,7 +737,7 @@ static int tps6594_regulator_probe(struct platform_device *pdev)
 						     pdev->name);
 
 			error = tps6594_request_reg_irqs(pdev, rdev, irq_data,
-							 ldos_irq_types[i], interrupt_count,
+							 ldos_irq_types[i], nr_types,
 							 &irq_idx);
 			if (error)
 				return error;
-- 
2.39.5


  parent reply	other threads:[~2025-06-13 11:45 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-13 11:45 [PATCH v2 0/7] mfd: tps6594: Add TI TPS652G1 support Michael Walle
2025-06-13 11:45 ` [PATCH v2 1/7] " Michael Walle
2025-06-19 13:35   ` Lee Jones
2025-07-10  9:00   ` Lee Jones
2025-07-10  9:06     ` Michael Walle
2025-07-10  9:47       ` Lee Jones
2025-06-13 11:45 ` [PATCH v2 2/7] misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM Michael Walle
2025-06-30  7:48   ` Arnd Bergmann
2025-06-13 11:45 ` [PATCH v2 3/7] pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO Michael Walle
2025-06-18 11:52   ` Linus Walleij
2025-06-13 11:45 ` Michael Walle [this message]
2025-06-13 12:06   ` [PATCH v2 4/7] regulator: tps6594-regulator: remove interrupt_count Mark Brown
2025-06-13 11:45 ` [PATCH v2 5/7] regulator: tps6594-regulator: remove hardcoded buck config Michael Walle
2025-06-13 12:06   ` Mark Brown
2025-06-13 11:45 ` [PATCH v2 6/7] regulator: tps6594-regulator: refactor variant descriptions Michael Walle
2025-06-13 12:07   ` Mark Brown
2025-06-13 11:45 ` [PATCH v2 7/7] regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators Michael Walle
2025-06-13 12:07   ` Mark Brown
2025-07-02 15:30 ` [PATCH v2 0/7] mfd: tps6594: Add TI TPS652G1 support Lee Jones
2025-07-10  8:58 ` (subset) " Lee Jones
2025-07-10  9:49 ` [GIT PULL] Immutable branch between MFD, Misc and Pinctrl due for the v6.17 merge window Lee Jones
2025-07-10  9:57   ` Mark Brown
2025-07-10 10:46     ` Michael Walle
2025-07-10 11:04       ` Mark Brown
2025-07-18  7:13     ` Lee Jones
2025-07-18 13:27       ` Mark Brown
2025-07-18 13:38         ` Lee Jones
2025-07-18 14:33           ` Mark Brown
2025-07-11 17:37   ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250613114518.1772109-5-mwalle@kernel.org \
    --to=mwalle@kernel.org \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jpanis@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).