[PATCH v1 10/14] regulator: dt-bindings: Convert Dialog Semiconductor DA9211 Regulators to YAML

[Ariel D'Alessandro <ariel.dalessandro@collabora.com>]

Convert the existing text-based DT bindings for Dialog Semiconductor DA9211
Voltage Regulators family to a YAML schema. Examples are simplified, as
these are all equal.

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
 .../devicetree/bindings/regulator/da9211.txt  | 205 ------------------
 .../bindings/regulator/dlg,da9211.yaml        | 104 +++++++++
 2 files changed, 104 insertions(+), 205 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/regulator/da9211.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/dlg,da9211.yaml

diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
deleted file mode 100644
index eb871447d5082..0000000000000
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ /dev/null
@@ -1,205 +0,0 @@
-* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
- Voltage Regulator
-
-Required properties:
-- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223"
-  or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225"
-- reg: I2C slave address, usually 0x68.
-- interrupts: the interrupt outputs of the controller
-- regulators: A node that houses a sub-node for each regulator within the
-  device. Each sub-node is identified using the node's name, with valid
-  values listed below. The content of each sub-node is defined by the
-  standard binding for regulators; see regulator.txt.
-  BUCKA and BUCKB.
-
-Optional properties:
-- enable-gpios: platform gpio for control of BUCKA/BUCKB.
-- Any optional property defined in regulator.txt
-  - regulator-initial-mode and regulator-allowed-modes may be specified using
-    mode values from dt-bindings/regulator/dlg,da9211-regulator.h
-
-Example 1) DA9211
-	pmic: da9211@68 {
-		compatible = "dlg,da9211";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <2000000>;
-				regulator-max-microamp 	= <5000000>;
-				enable-gpios = <&gpio 27 0>;
-				regulator-allowed-modes = <DA9211_BUCK_MODE_SYNC
-							   DA9211_BUCK_MODE_AUTO>;
-			};
-		};
-	};
-
-Example 2) DA9212
-	pmic: da9212@68 {
-		compatible = "dlg,da9212";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <2000000>;
-				regulator-max-microamp 	= <5000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <2000000>;
-				regulator-max-microamp 	= <5000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
-
-Example 3) DA9213
-	pmic: da9213@68 {
-		compatible = "dlg,da9213";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-		};
-	};
-
-Example 4) DA9223
-	pmic: da9223@68 {
-		compatible = "dlg,da9223";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-		};
-	};
-
-Example 5) DA9214
-	pmic: da9214@68 {
-		compatible = "dlg,da9214";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
-
-Example 6) DA9224
-	pmic: da9224@68 {
-		compatible = "dlg,da9224";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <3000000>;
-				regulator-max-microamp 	= <6000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
-
-Example 7) DA9215
-	pmic: da9215@68 {
-		compatible = "dlg,da9215";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <4000000>;
-				regulator-max-microamp 	= <7000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <4000000>;
-				regulator-max-microamp 	= <7000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
-
-Example 8) DA9225
-	pmic: da9225@68 {
-		compatible = "dlg,da9225";
-		reg = <0x68>;
-		interrupts = <3 27>;
-
-		regulators {
-			BUCKA {
-				regulator-name = "VBUCKA";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <4000000>;
-				regulator-max-microamp 	= <7000000>;
-				enable-gpios = <&gpio 27 0>;
-			};
-			BUCKB {
-				regulator-name = "VBUCKB";
-				regulator-min-microvolt = < 300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp 	= <4000000>;
-				regulator-max-microamp 	= <7000000>;
-				enable-gpios = <&gpio 17 0>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml
new file mode 100644
index 0000000000000..d4c5b354497f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,da9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |
+  Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
+  Voltage Regulator
+
+maintainers:
+  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - "dlg,da9211"
+      - "dlg,da9212"
+      - "dlg,da9213"
+      - "dlg,da9223"
+      - "dlg,da9214"
+      - "dlg,da9224"
+      - "dlg,da9215"
+      - "dlg,da9225"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: |
+      List of regulators provided by the device
+
+    patternProperties:
+      "^BUCK([A-B])$":
+        type: object
+        $ref: regulator.yaml#
+        description: |
+          Properties for a single BUCK regulator
+
+        properties:
+          regulator-initial-mode:
+            items:
+              enum: [ 1, 2, 3 ]
+            description: Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h
+
+          regulator-allowed-modes:
+            items:
+              enum: [ 1, 2, 3 ]
+            description: Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h
+
+          enable-gpios:
+            maxItems: 1
+            description: Specify a valid GPIO for platform control of the regulator
+
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/regulator/dlg,da9211-regulator.h>
+
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        da9212: da9212@68 {
+            compatible = "dlg,da9212";
+            reg = <0x68>;
+            interrupts = <3 27>;
+
+            regulators {
+                BUCKA {
+                    regulator-name = "VBUCKA";
+                    regulator-min-microvolt = < 300000>;
+                    regulator-max-microvolt = <1570000>;
+                    regulator-min-microamp = <2000000>;
+                    regulator-max-microamp = <5000000>;
+                    enable-gpios = <&gpio 27 0>;
+                };
+                BUCKB {
+                    regulator-name = "VBUCKB";
+                    regulator-min-microvolt = < 300000>;
+                    regulator-max-microvolt = <1570000>;
+                    regulator-min-microamp = <2000000>;
+                    regulator-max-microamp = <5000000>;
+                    enable-gpios = <&gpio 17 0>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.50.1