[PATCH v8 0/7] Initial support of MSM8937 and Xiaomi Redmi 3S

[PATCH v8 0/7] Initial support of MSM8937 and Xiaomi Redmi 3S

[Barnabás Czémán]

This patch series add initial support for MSM8937 SoC
and Xiaomi Redmi 3S (land).

The series is extending the MSM8917 gcc and pinctrl drivers
because they are sibling SoCs.
MSM8937 have 4 more A53 cores and have one more dsi port then
MSM8917.
It implements little-big architecture and uses Adreno 505.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
Changes in v8:
- msm8937:
  - Fix scm compatible.
  - Fix position of sram@60000 node.
- Document qcom,scm-msm8937 compatible
- Link to v7: https://lore.kernel.org/r/20250831-msm8937-v7-0-232a9fb19ab7@mainlining.org

Changes in v7:
- gpu.yaml: update adreno 505 pattern
- Link to v6: https://lore.kernel.org/r/20250820-msm8937-v6-0-b090b2acb67e@mainlining.org

Changes in v6:
- msm8937:
  - Fix nodes ordering.
  - Format clocks, reg, dmas and -names properties.
  - Add gpu_speedbin.
- Describe A505 clocks.
- Link to v5: https://lore.kernel.org/r/20250421-msm8937-v5-0-bf9879ef14d9@mainlining.org

Changes in v5:
- msm8937:
  - Remove wrongly defined idle-states.
  - Fix thermal zones.
  - Use the header with DSI phy clock IDs.
  - Fix the nodes order.
  - Fix the pinctrls style.
  - Follow gcc header changes.
- msm8937-xiaomi-land:
  - Remove headphone switch and speaker amplifier bindings.
  - Unify status property style.
- gcc bindings:
  - Expand MSM8953 gcc schema with MSM8937.
  - Add MSM8937 prefix for MSM8937 specific clocks.
- gcc:
  - Follow the bindings changes.
- Drop alwayson clock documentation it will be handled in another
  patchset.
- Link to v4: https://lore.kernel.org/r/20250315-msm8937-v4-0-1f132e870a49@mainlining.org

Changes in v4:
- Add missing rpmcc include for qcom,gcc-msm8937 dtbinding exmaple.
- msm8937: add missing space after s9-p1@230
- msm8937-xiaomi-land: replace LED_FUNCTION_INDICATOR to LED_FUNCTION_STATUS
- Remove applied patches
- Link to v3: https://lore.kernel.org/r/20250224-msm8937-v3-0-dad7c182cccb@mainlining.org

Changes in v3:
- Fix qcom,gcc-msm8937 dtbinding example 
- Link to v2: https://lore.kernel.org/r/20250223-msm8937-v2-0-b99722363ed3@mainlining.org

Changes in v2:
- drop applied patches
- drop gcc schema commits infavor of a new schema for gcc-msm8937
- document always on clock for adreno 505/506/510
- msm8937:
  - set cache size
  - rename cpu labels
  - fix style issues addressed by review
- msm8937-xiaom-land:
  - remove unused serial0 alias
  - remove regulator-always-on from pm8937_l6
  - add blue indicator led for aw2013
- Link to v1: https://lore.kernel.org/r/20250211-msm8937-v1-0-7d27ed67f708@mainlining.org

---
Barnabás Czémán (5):
      dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller
      dt-bindings: firmware: qcom,scm: Add MSM8937
      dt-bindings: display/msm/gpu: describe A505 clocks
      dt-bindings: arm: qcom: Add Xiaomi Redmi 3S
      arm64: dts: qcom: Add Xiaomi Redmi 3S

Dang Huynh (1):
      arm64: dts: qcom: Add initial support for MSM8937

Daniil Titov (1):
      clk: qcom: gcc: Add support for Global Clock controller found on MSM8937

 Documentation/devicetree/bindings/arm/qcom.yaml    |    6 +
 .../bindings/clock/qcom,gcc-msm8953.yaml           |   11 +-
 .../devicetree/bindings/display/msm/gpu.yaml       |    2 +-
 .../devicetree/bindings/firmware/qcom,scm.yaml     |    3 +
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts   |  381 ++++
 arch/arm64/boot/dts/qcom/msm8937.dtsi              | 2134 ++++++++++++++++++++
 drivers/clk/qcom/Kconfig                           |    6 +-
 drivers/clk/qcom/gcc-msm8917.c                     |  617 +++++-
 include/dt-bindings/clock/qcom,gcc-msm8917.h       |   19 +
 10 files changed, 3169 insertions(+), 11 deletions(-)
---
base-commit: 3cace99d63192a7250461b058279a42d91075d0c
change-id: 20250210-msm8937-228ef0dc3ec9

Best regards,
-- 
Barnabás Czémán <barnabas.czeman@mainlining.org>

[PATCH v8 1/7] dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller

[Barnabás Czémán]

Add device tree bindings for the global clock controller on Qualcomm
MSM8937 platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 .../devicetree/bindings/clock/qcom,gcc-msm8953.yaml   | 11 ++++++++---
 include/dt-bindings/clock/qcom,gcc-msm8917.h          | 19 +++++++++++++++++++
 2 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
index fe1f5f3ed992453a347062a556b1ddb2a011db6f..f2e37f439d28b3ec066f407927955b3b82b5c10a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8953.yaml
@@ -9,16 +9,21 @@ title: Qualcomm Global Clock & Reset Controller on MSM8953
 maintainers:
   - Adam Skladowski <a_skl39@protonmail.com>
   - Sireesh Kodali <sireeshkodali@protonmail.com>
+  - Barnabas Czeman <barnabas.czeman@mainlining.org>
 
 description: |
   Qualcomm global clock control module provides the clocks, resets and power
-  domains on MSM8953.
+  domains on MSM8937 or MSM8953.
 
-  See also: include/dt-bindings/clock/qcom,gcc-msm8953.h
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8917.h
+    include/dt-bindings/clock/qcom,gcc-msm8953.h
 
 properties:
   compatible:
-    const: qcom,gcc-msm8953
+    enum:
+      - qcom,gcc-msm8937
+      - qcom,gcc-msm8953
 
   clocks:
     items:
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8917.h b/include/dt-bindings/clock/qcom,gcc-msm8917.h
index 4b421e7414b50bef2e2400f868ae5b7212a427bb..4e3897b3669d9149b61a6feec31ca35e2058dcb9 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8917.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8917.h
@@ -170,6 +170,23 @@
 #define VFE1_CLK_SRC				163
 #define VSYNC_CLK_SRC				164
 #define GPLL0_SLEEP_CLK_SRC			165
+/* Addtional MSM8937-specific clocks */
+#define MSM8937_BLSP1_QUP1_I2C_APPS_CLK_SRC		166
+#define MSM8937_BLSP1_QUP1_SPI_APPS_CLK_SRC		167
+#define MSM8937_BLSP2_QUP4_I2C_APPS_CLK_SRC		168
+#define MSM8937_BLSP2_QUP4_SPI_APPS_CLK_SRC		169
+#define MSM8937_BYTE1_CLK_SRC				170
+#define MSM8937_ESC1_CLK_SRC				171
+#define MSM8937_PCLK1_CLK_SRC				172
+#define MSM8937_GCC_BLSP1_QUP1_I2C_APPS_CLK		173
+#define MSM8937_GCC_BLSP1_QUP1_SPI_APPS_CLK		174
+#define MSM8937_GCC_BLSP2_QUP4_I2C_APPS_CLK		175
+#define MSM8937_GCC_BLSP2_QUP4_SPI_APPS_CLK		176
+#define MSM8937_GCC_MDSS_BYTE1_CLK			177
+#define MSM8937_GCC_MDSS_ESC1_CLK			178
+#define MSM8937_GCC_MDSS_PCLK1_CLK			179
+#define MSM8937_GCC_OXILI_AON_CLK			180
+#define MSM8937_GCC_OXILI_TIMER_CLK			181
 
 /* GCC block resets */
 #define GCC_CAMSS_MICRO_BCR			0
@@ -187,5 +204,7 @@
 #define VENUS_GDSC				5
 #define VFE0_GDSC				6
 #define VFE1_GDSC				7
+/* Additional MSM8937-specific GDSCs */
+#define MSM8937_OXILI_CX_GDSC				8
 
 #endif

-- 
2.51.0

[PATCH v8 2/7] clk: qcom: gcc: Add support for Global Clock controller found on MSM8937

[Barnabás Czémán]

From: Daniil Titov <daniilt971@gmail.com>

Modify existing MSM8917 driver to support MSM8937 SoC. Override frequencies
which are different in this chip. Register all the clocks to the framework
for the clients to be able to request for them. Add new variant of GDSC for
new chip.

Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 drivers/clk/qcom/Kconfig       |   6 +-
 drivers/clk/qcom/gcc-msm8917.c | 617 ++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 616 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index aeb6197d7c902098459c9b2cba75072bd519b0f3..e5de50354125445edcfdcfa03aa218ee66859b9a 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -332,12 +332,12 @@ config MSM_GCC_8916
 	  SD/eMMC, display, graphics, camera etc.
 
 config MSM_GCC_8917
-	tristate "MSM8917/QM215 Global Clock Controller"
+	tristate "MSM89(17/37)/QM215 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
 	select QCOM_GDSC
 	help
-	  Support for the global clock controller on msm8917 and qm215
-	  devices.
+	  Support for the global clock controller on msm8917, msm8937
+	  and qm215 devices.
 	  Say Y if you want to use devices such as UART, SPI i2c, USB,
 	  SD/eMMC, display, graphics, camera etc.
 
diff --git a/drivers/clk/qcom/gcc-msm8917.c b/drivers/clk/qcom/gcc-msm8917.c
index 3e2a2ae2ee6e9e647fb68c493ae7b0e49af79968..0a1aa623cd49af55d9d81148df7809b170fea60b 100644
--- a/drivers/clk/qcom/gcc-msm8917.c
+++ b/drivers/clk/qcom/gcc-msm8917.c
@@ -37,6 +37,8 @@ enum {
 	DT_SLEEP_CLK,
 	DT_DSI0PLL,
 	DT_DSI0PLL_BYTE,
+	DT_DSI1PLL,
+	DT_DSI1PLL_BYTE,
 };
 
 enum {
@@ -48,6 +50,8 @@ enum {
 	P_GPLL6,
 	P_DSI0PLL,
 	P_DSI0PLL_BYTE,
+	P_DSI1PLL,
+	P_DSI1PLL_BYTE,
 };
 
 static struct clk_alpha_pll gpll0_sleep_clk_src = {
@@ -102,7 +106,11 @@ static const struct pll_vco gpll3_p_vco[] = {
 	{ 700000000, 1400000000, 0 },
 };
 
-static const struct alpha_pll_config gpll3_early_config = {
+static const struct pll_vco gpll3_p_vco_msm8937[] = {
+	{ 525000000, 1066000000, 0 },
+};
+
+static struct alpha_pll_config gpll3_early_config = {
 	.l = 63,
 	.config_ctl_val = 0x4001055b,
 	.early_output_mask = 0,
@@ -273,6 +281,19 @@ static const struct freq_tbl ftbl_blsp_i2c_apps_clk_src[] = {
 	{ }
 };
 
+static struct clk_rcg2 blsp1_qup1_i2c_apps_clk_src = {
+	.cmd_rcgr = 0x0200c,
+	.hid_width = 5,
+	.freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "blsp1_qup1_i2c_apps_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static struct clk_rcg2 blsp1_qup2_i2c_apps_clk_src = {
 	.cmd_rcgr = 0x03000,
 	.hid_width = 5,
@@ -351,6 +372,19 @@ static struct clk_rcg2 blsp2_qup3_i2c_apps_clk_src = {
 	}
 };
 
+static struct clk_rcg2 blsp2_qup4_i2c_apps_clk_src = {
+	.cmd_rcgr = 0x18000,
+	.hid_width = 5,
+	.freq_tbl = ftbl_blsp_i2c_apps_clk_src,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "blsp2_qup4_i2c_apps_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static const struct freq_tbl ftbl_blsp_spi_apps_clk_src[] = {
 	F(960000, P_XO, 10, 1, 2),
 	F(4800000, P_XO, 4, 0, 0),
@@ -362,6 +396,20 @@ static const struct freq_tbl ftbl_blsp_spi_apps_clk_src[] = {
 	{ }
 };
 
+static struct clk_rcg2 blsp1_qup1_spi_apps_clk_src = {
+	.cmd_rcgr = 0x02024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.freq_tbl = ftbl_blsp_spi_apps_clk_src,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "blsp1_qup1_spi_apps_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static struct clk_rcg2 blsp1_qup2_spi_apps_clk_src = {
 	.cmd_rcgr = 0x03014,
 	.hid_width = 5,
@@ -446,6 +494,20 @@ static struct clk_rcg2 blsp2_qup3_spi_apps_clk_src = {
 	}
 };
 
+static struct clk_rcg2 blsp2_qup4_spi_apps_clk_src = {
+	.cmd_rcgr = 0x18024,
+	.mnd_width = 8,
+	.hid_width = 5,
+	.freq_tbl = ftbl_blsp_spi_apps_clk_src,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "blsp2_qup4_spi_apps_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static const struct freq_tbl ftbl_blsp_uart_apps_clk_src[] = {
 	F(3686400, P_GPLL0, 1, 72, 15625),
 	F(7372800, P_GPLL0, 1, 144, 15625),
@@ -525,11 +587,19 @@ static struct clk_rcg2 blsp2_uart2_apps_clk_src = {
 static const struct parent_map gcc_byte0_map[] = {
 	{ P_XO, 0 },
 	{ P_DSI0PLL_BYTE, 1 },
+	{ P_DSI1PLL_BYTE, 3 },
+};
+
+static const struct parent_map gcc_byte1_map[] = {
+	{ P_XO, 0 },
+	{ P_DSI0PLL_BYTE, 3 },
+	{ P_DSI1PLL_BYTE, 1 },
 };
 
 static const struct clk_parent_data gcc_byte_data[] = {
 	{ .index = DT_XO },
 	{ .index = DT_DSI0PLL_BYTE },
+	{ .index = DT_DSI1PLL_BYTE },
 };
 
 static struct clk_rcg2 byte0_clk_src = {
@@ -545,6 +615,19 @@ static struct clk_rcg2 byte0_clk_src = {
 	}
 };
 
+static struct clk_rcg2 byte1_clk_src = {
+	.cmd_rcgr = 0x4d0b0,
+	.hid_width = 5,
+	.parent_map = gcc_byte1_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "byte1_clk_src",
+		.parent_data = gcc_byte_data,
+		.num_parents = ARRAY_SIZE(gcc_byte_data),
+		.ops = &clk_byte2_ops,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 static const struct freq_tbl ftbl_camss_gp_clk_src[] = {
 	F(100000000, P_GPLL0, 8, 0, 0),
 	F(160000000, P_GPLL0, 5, 0, 0),
@@ -642,6 +725,17 @@ static const struct freq_tbl ftbl_cpp_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_cpp_clk_src_msm8937[] = {
+	F(133330000, P_GPLL0, 6, 0, 0),
+	F(160000000, P_GPLL0, 5, 0, 0),
+	F(200000000, P_GPLL0, 5, 0, 0),
+	F(266666667, P_GPLL0, 3, 0, 0),
+	F(308570000, P_GPLL6, 3.5, 0, 0),
+	F(320000000, P_GPLL0, 2.5, 0, 0),
+	F(360000000, P_GPLL6, 3, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 cpp_clk_src = {
 	.cmd_rcgr = 0x58018,
 	.hid_width = 5,
@@ -655,6 +749,13 @@ static struct clk_rcg2 cpp_clk_src = {
 	}
 };
 
+static struct clk_init_data vcodec0_clk_src_init_msm8937 = {
+	.name = "vcodec0_clk_src",
+	.parent_data = gcc_cpp_data,
+	.num_parents = ARRAY_SIZE(gcc_cpp_data),
+	.ops = &clk_rcg2_ops,
+};
+
 static const struct freq_tbl ftbl_crypto_clk_src[] = {
 	F(50000000, P_GPLL0, 16, 0, 0),
 	F(80000000, P_GPLL0, 10, 0, 0),
@@ -730,6 +831,13 @@ static const struct freq_tbl ftbl_csi_phytimer_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_csi_phytimer_clk_src_msm8937[] = {
+	F(100000000, P_GPLL0, 8, 0, 0),
+	F(160000000, P_GPLL0, 5, 0, 0),
+	F(200000000, P_GPLL0, 4, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 csi0phytimer_clk_src = {
 	.cmd_rcgr = 0x4e000,
 	.hid_width = 5,
@@ -774,6 +882,19 @@ static struct clk_rcg2 esc0_clk_src = {
 	}
 };
 
+static struct clk_rcg2 esc1_clk_src = {
+	.cmd_rcgr = 0x4d0a8,
+	.hid_width = 5,
+	.freq_tbl = ftbl_esc0_1_clk_src,
+	.parent_map = gcc_xo_gpll0_out_aux_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "esc1_clk_src",
+		.parent_data = gcc_xo_gpll0_data,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0_data),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static const struct parent_map gcc_gfx3d_map[] = {
 	{ P_XO, 0 },
 	{ P_GPLL0, 1 },
@@ -817,6 +938,25 @@ static const struct freq_tbl ftbl_gfx3d_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_gfx3d_clk_src_msm8937[] = {
+	F(19200000, P_XO, 1, 0, 0),
+	F(50000000, P_GPLL0, 16, 0, 0),
+	F(80000000, P_GPLL0, 10, 0, 0),
+	F(100000000, P_GPLL0, 8, 0, 0),
+	F(160000000, P_GPLL0, 5, 0, 0),
+	F(200000000, P_GPLL0, 4, 0, 0),
+	F(216000000, P_GPLL6, 5, 0, 0),
+	F(228570000, P_GPLL0, 3.5, 0, 0),
+	F(240000000, P_GPLL6, 4.5, 0, 0),
+	F(266670000, P_GPLL0, 3, 0, 0),
+	F(300000000, P_GPLL3, 1, 0, 0),
+	F(320000000, P_GPLL0, 2.5, 0, 0),
+	F(375000000, P_GPLL3, 1, 0, 0),
+	F(400000000, P_GPLL0, 2, 0, 0),
+	F(450000000, P_GPLL3, 1, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 gfx3d_clk_src = {
 	.cmd_rcgr = 0x59000,
 	.hid_width = 5,
@@ -973,21 +1113,29 @@ static struct clk_rcg2 mdp_clk_src = {
 	}
 };
 
-static const struct parent_map gcc_pclk_map[] = {
+static const struct parent_map gcc_pclk0_map[] = {
 	{ P_XO, 0 },
 	{ P_DSI0PLL, 1 },
+	{ P_DSI1PLL, 3 },
+};
+
+static const struct parent_map gcc_pclk1_map[] = {
+	{ P_XO, 0 },
+	{ P_DSI0PLL, 3 },
+	{ P_DSI1PLL, 1 },
 };
 
 static const struct clk_parent_data gcc_pclk_data[] = {
 	{ .index = DT_XO },
 	{ .index = DT_DSI0PLL },
+	{ .index = DT_DSI1PLL },
 };
 
 static struct clk_rcg2 pclk0_clk_src = {
 	.cmd_rcgr = 0x4d000,
 	.hid_width = 5,
 	.mnd_width = 8,
-	.parent_map = gcc_pclk_map,
+	.parent_map = gcc_pclk0_map,
 	.clkr.hw.init = &(struct clk_init_data) {
 		.name = "pclk0_clk_src",
 		.parent_data = gcc_pclk_data,
@@ -997,6 +1145,20 @@ static struct clk_rcg2 pclk0_clk_src = {
 	}
 };
 
+static struct clk_rcg2 pclk1_clk_src = {
+	.cmd_rcgr = 0x4d0b8,
+	.hid_width = 5,
+	.mnd_width = 8,
+	.parent_map = gcc_pclk1_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "pclk1_clk_src",
+		.parent_data = gcc_pclk_data,
+		.num_parents = ARRAY_SIZE(gcc_pclk_data),
+		.ops = &clk_pixel_ops,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 static const struct freq_tbl ftbl_pdm2_clk_src[] = {
 	F(64000000, P_GPLL0, 12.5, 0, 0),
 	{ }
@@ -1108,6 +1270,14 @@ static const struct freq_tbl ftbl_usb_hs_system_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_usb_hs_system_clk_src_msm8937[] = {
+	F(57142857, P_GPLL0, 14, 0, 0),
+	F(100000000, P_GPLL0, 8, 0, 0),
+	F(133333333, P_GPLL0, 6, 0, 0),
+	F(177777778, P_GPLL0, 4.5, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 usb_hs_system_clk_src = {
 	.cmd_rcgr = 0x41010,
 	.hid_width = 5,
@@ -1132,6 +1302,15 @@ static const struct freq_tbl ftbl_vcodec0_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_vcodec0_clk_src_msm8937[] = {
+	F(166150000, P_GPLL6, 6.5, 0, 0),
+	F(240000000, P_GPLL6, 4.5, 0, 0),
+	F(308571428, P_GPLL6, 3.5, 0, 0),
+	F(320000000, P_GPLL0, 2.5, 0, 0),
+	F(360000000, P_GPLL6, 3, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 vcodec0_clk_src = {
 	.cmd_rcgr = 0x4c000,
 	.hid_width = 5,
@@ -1160,6 +1339,23 @@ static const struct freq_tbl ftbl_vfe_clk_src[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_vfe_clk_src_msm8937[] = {
+	F(50000000, P_GPLL0, 16, 0, 0),
+	F(80000000, P_GPLL0, 10, 0, 0),
+	F(100000000, P_GPLL0, 8, 0, 0),
+	F(133333333, P_GPLL0, 6, 0, 0),
+	F(160000000, P_GPLL0, 5, 0, 0),
+	F(177777778, P_GPLL0, 4.5, 0, 0),
+	F(200000000, P_GPLL0, 4, 0, 0),
+	F(266666667, P_GPLL0, 3, 0, 0),
+	F(308571428, P_GPLL6, 3.5, 0, 0),
+	F(320000000, P_GPLL0, 2.5, 0, 0),
+	F(360000000, P_GPLL6, 3, 0, 0),
+	F(400000000, P_GPLL0, 2, 0, 0),
+	F(432000000, P_GPLL6, 2.5, 0, 0),
+	{ }
+};
+
 static struct clk_rcg2 vfe0_clk_src = {
 	.cmd_rcgr = 0x58000,
 	.hid_width = 5,
@@ -1269,6 +1465,24 @@ static struct clk_branch gcc_blsp2_ahb_clk = {
 	}
 };
 
+static struct clk_branch gcc_blsp1_qup1_i2c_apps_clk = {
+	.halt_reg = 0x02008,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x02008,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup1_i2c_apps_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&blsp1_qup1_i2c_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_blsp1_qup2_i2c_apps_clk = {
 	.halt_reg = 0x03010,
 	.halt_check = BRANCH_HALT,
@@ -1377,6 +1591,42 @@ static struct clk_branch gcc_blsp2_qup3_i2c_apps_clk = {
 	}
 };
 
+static struct clk_branch gcc_blsp2_qup4_i2c_apps_clk = {
+	.halt_reg = 0x18020,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x18020,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp2_qup4_i2c_apps_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&blsp2_qup4_i2c_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static struct clk_branch gcc_blsp1_qup1_spi_apps_clk = {
+	.halt_reg = 0x02004,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x02004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp1_qup1_spi_apps_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&blsp1_qup1_spi_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_blsp1_qup2_spi_apps_clk = {
 	.halt_reg = 0x0300c,
 	.halt_check = BRANCH_HALT,
@@ -1485,6 +1735,24 @@ static struct clk_branch gcc_blsp2_qup3_spi_apps_clk = {
 	}
 };
 
+static struct clk_branch gcc_blsp2_qup4_spi_apps_clk = {
+	.halt_reg = 0x1801c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1801c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_blsp2_qup4_spi_apps_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&blsp2_qup4_spi_apps_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_blsp1_uart1_apps_clk = {
 	.halt_reg = 0x0203c,
 	.halt_check = BRANCH_HALT,
@@ -2521,6 +2789,24 @@ static struct clk_branch gcc_mdss_byte0_clk = {
 	}
 };
 
+static struct clk_branch gcc_mdss_byte1_clk = {
+	.halt_reg = 0x4d0a0,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4d0a0,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mdss_byte1_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&byte1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_mdss_esc0_clk = {
 	.halt_reg = 0x4d098,
 	.halt_check = BRANCH_HALT,
@@ -2539,6 +2825,24 @@ static struct clk_branch gcc_mdss_esc0_clk = {
 	}
 };
 
+static struct clk_branch gcc_mdss_esc1_clk = {
+	.halt_reg = 0x4d09c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4d09c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mdss_esc1_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&esc1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_mdss_mdp_clk = {
 	.halt_reg = 0x4d088,
 	.halt_check = BRANCH_HALT,
@@ -2575,6 +2879,24 @@ static struct clk_branch gcc_mdss_pclk0_clk = {
 	}
 };
 
+static struct clk_branch gcc_mdss_pclk1_clk = {
+	.halt_reg = 0x4d0a4,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x4d0a4,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mdss_pclk1_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&pclk1_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_mdss_vsync_clk = {
 	.halt_reg = 0x4d090,
 	.halt_check = BRANCH_HALT,
@@ -2632,6 +2954,24 @@ static struct clk_branch gcc_oxili_ahb_clk = {
 	}
 };
 
+static struct clk_branch gcc_oxili_aon_clk = {
+	.halt_reg = 0x5904c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x5904c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_oxili_aon_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gfx3d_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_branch gcc_oxili_gfx3d_clk = {
 	.halt_reg = 0x59020,
 	.halt_check = BRANCH_HALT,
@@ -2650,6 +2990,19 @@ static struct clk_branch gcc_oxili_gfx3d_clk = {
 	}
 };
 
+static struct clk_branch gcc_oxili_timer_clk = {
+	.halt_reg = 0x59040,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x59040,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_oxili_timer_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_pdm2_clk = {
 	.halt_reg = 0x4400c,
 	.halt_check = BRANCH_HALT,
@@ -3027,6 +3380,28 @@ static struct gdsc oxili_gx_gdsc = {
 	.flags = CLAMP_IO,
 };
 
+static struct gdsc oxili_gx_gdsc_msm8937 = {
+	.gdscr = 0x5901c,
+	.clamp_io_ctrl = 0x5b00c,
+	.cxcs = (unsigned int []){ 0x59000 },
+	.cxc_count = 1,
+	.pd = {
+		.name = "oxili_gx_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = CLAMP_IO,
+};
+
+static struct gdsc oxili_cx_gdsc = {
+	.gdscr = 0x59044,
+	.cxcs = (unsigned int []){ 0x59020 },
+	.cxc_count = 1,
+	.pd = {
+		.name = "oxili_cx_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
 static struct gdsc cpp_gdsc = {
 	.gdscr = 0x58078,
 	.cxcs = (unsigned int []){ 0x5803c, 0x58064 },
@@ -3207,6 +3582,188 @@ static struct clk_regmap *gcc_msm8917_clocks[] = {
 	[GCC_VFE_TBU_CLK] = &gcc_vfe_tbu_clk.clkr,
 };
 
+static struct clk_regmap *gcc_msm8937_clocks[] = {
+	[GPLL0] = &gpll0.clkr,
+	[GPLL0_EARLY] = &gpll0_early.clkr,
+	[GPLL0_SLEEP_CLK_SRC] = &gpll0_sleep_clk_src.clkr,
+	[GPLL3] = &gpll3.clkr,
+	[GPLL3_EARLY] = &gpll3_early.clkr,
+	[GPLL4] = &gpll4.clkr,
+	[GPLL4_EARLY] = &gpll4_early.clkr,
+	[GPLL6] = &gpll6,
+	[GPLL6_EARLY] = &gpll6_early.clkr,
+	[APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr,
+	[MSM8937_BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
+	[MSM8937_BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr,
+	[BLSP1_QUP2_I2C_APPS_CLK_SRC] = &blsp1_qup2_i2c_apps_clk_src.clkr,
+	[BLSP1_QUP2_SPI_APPS_CLK_SRC] = &blsp1_qup2_spi_apps_clk_src.clkr,
+	[BLSP1_QUP3_I2C_APPS_CLK_SRC] = &blsp1_qup3_i2c_apps_clk_src.clkr,
+	[BLSP1_QUP3_SPI_APPS_CLK_SRC] = &blsp1_qup3_spi_apps_clk_src.clkr,
+	[BLSP1_QUP4_I2C_APPS_CLK_SRC] = &blsp1_qup4_i2c_apps_clk_src.clkr,
+	[BLSP1_QUP4_SPI_APPS_CLK_SRC] = &blsp1_qup4_spi_apps_clk_src.clkr,
+	[BLSP1_UART1_APPS_CLK_SRC] = &blsp1_uart1_apps_clk_src.clkr,
+	[BLSP1_UART2_APPS_CLK_SRC] = &blsp1_uart2_apps_clk_src.clkr,
+	[BLSP2_QUP1_I2C_APPS_CLK_SRC] = &blsp2_qup1_i2c_apps_clk_src.clkr,
+	[BLSP2_QUP1_SPI_APPS_CLK_SRC] = &blsp2_qup1_spi_apps_clk_src.clkr,
+	[BLSP2_QUP2_I2C_APPS_CLK_SRC] = &blsp2_qup2_i2c_apps_clk_src.clkr,
+	[BLSP2_QUP2_SPI_APPS_CLK_SRC] = &blsp2_qup2_spi_apps_clk_src.clkr,
+	[BLSP2_QUP3_I2C_APPS_CLK_SRC] = &blsp2_qup3_i2c_apps_clk_src.clkr,
+	[BLSP2_QUP3_SPI_APPS_CLK_SRC] = &blsp2_qup3_spi_apps_clk_src.clkr,
+	[MSM8937_BLSP2_QUP4_I2C_APPS_CLK_SRC] = &blsp2_qup4_i2c_apps_clk_src.clkr,
+	[MSM8937_BLSP2_QUP4_SPI_APPS_CLK_SRC] = &blsp2_qup4_spi_apps_clk_src.clkr,
+	[BLSP2_UART1_APPS_CLK_SRC] = &blsp2_uart1_apps_clk_src.clkr,
+	[BLSP2_UART2_APPS_CLK_SRC] = &blsp2_uart2_apps_clk_src.clkr,
+	[BYTE0_CLK_SRC] = &byte0_clk_src.clkr,
+	[MSM8937_BYTE1_CLK_SRC] = &byte1_clk_src.clkr,
+	[CAMSS_GP0_CLK_SRC] = &camss_gp0_clk_src.clkr,
+	[CAMSS_GP1_CLK_SRC] = &camss_gp1_clk_src.clkr,
+	[CAMSS_TOP_AHB_CLK_SRC] = &camss_top_ahb_clk_src.clkr,
+	[CCI_CLK_SRC] = &cci_clk_src.clkr,
+	[CPP_CLK_SRC] = &cpp_clk_src.clkr,
+	[CRYPTO_CLK_SRC] = &crypto_clk_src.clkr,
+	[CSI0PHYTIMER_CLK_SRC] = &csi0phytimer_clk_src.clkr,
+	[CSI0_CLK_SRC] = &csi0_clk_src.clkr,
+	[CSI1PHYTIMER_CLK_SRC] = &csi1phytimer_clk_src.clkr,
+	[CSI1_CLK_SRC] = &csi1_clk_src.clkr,
+	[CSI2_CLK_SRC] = &csi2_clk_src.clkr,
+	[ESC0_CLK_SRC] = &esc0_clk_src.clkr,
+	[MSM8937_ESC1_CLK_SRC] = &esc1_clk_src.clkr,
+	[GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr,
+	[GP1_CLK_SRC] = &gp1_clk_src.clkr,
+	[GP2_CLK_SRC] = &gp2_clk_src.clkr,
+	[GP3_CLK_SRC] = &gp3_clk_src.clkr,
+	[JPEG0_CLK_SRC] = &jpeg0_clk_src.clkr,
+	[MCLK0_CLK_SRC] = &mclk0_clk_src.clkr,
+	[MCLK1_CLK_SRC] = &mclk1_clk_src.clkr,
+	[MCLK2_CLK_SRC] = &mclk2_clk_src.clkr,
+	[MDP_CLK_SRC] = &mdp_clk_src.clkr,
+	[PCLK0_CLK_SRC] = &pclk0_clk_src.clkr,
+	[MSM8937_PCLK1_CLK_SRC] = &pclk1_clk_src.clkr,
+	[PDM2_CLK_SRC] = &pdm2_clk_src.clkr,
+	[SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr,
+	[SDCC1_ICE_CORE_CLK_SRC] = &sdcc1_ice_core_clk_src.clkr,
+	[SDCC2_APPS_CLK_SRC] = &sdcc2_apps_clk_src.clkr,
+	[USB_HS_SYSTEM_CLK_SRC] = &usb_hs_system_clk_src.clkr,
+	[VCODEC0_CLK_SRC] = &vcodec0_clk_src.clkr,
+	[VFE0_CLK_SRC] = &vfe0_clk_src.clkr,
+	[VFE1_CLK_SRC] = &vfe1_clk_src.clkr,
+	[VSYNC_CLK_SRC] = &vsync_clk_src.clkr,
+	[GCC_APSS_TCU_CLK] = &gcc_apss_tcu_clk.clkr,
+	[GCC_BIMC_GFX_CLK] = &gcc_bimc_gfx_clk.clkr,
+	[GCC_BIMC_GPU_CLK] = &gcc_bimc_gpu_clk.clkr,
+	[GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
+	[MSM8937_GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
+	[MSM8937_GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr,
+	[GCC_BLSP1_QUP4_I2C_APPS_CLK] = &gcc_blsp1_qup4_i2c_apps_clk.clkr,
+	[GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
+	[GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
+	[GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
+	[GCC_BLSP2_AHB_CLK] = &gcc_blsp2_ahb_clk.clkr,
+	[GCC_BLSP2_QUP1_I2C_APPS_CLK] = &gcc_blsp2_qup1_i2c_apps_clk.clkr,
+	[GCC_BLSP2_QUP1_SPI_APPS_CLK] = &gcc_blsp2_qup1_spi_apps_clk.clkr,
+	[GCC_BLSP2_QUP2_I2C_APPS_CLK] = &gcc_blsp2_qup2_i2c_apps_clk.clkr,
+	[GCC_BLSP2_QUP2_SPI_APPS_CLK] = &gcc_blsp2_qup2_spi_apps_clk.clkr,
+	[GCC_BLSP2_QUP3_I2C_APPS_CLK] = &gcc_blsp2_qup3_i2c_apps_clk.clkr,
+	[GCC_BLSP2_QUP3_SPI_APPS_CLK] = &gcc_blsp2_qup3_spi_apps_clk.clkr,
+	[MSM8937_GCC_BLSP2_QUP4_I2C_APPS_CLK] = &gcc_blsp2_qup4_i2c_apps_clk.clkr,
+	[MSM8937_GCC_BLSP2_QUP4_SPI_APPS_CLK] = &gcc_blsp2_qup4_spi_apps_clk.clkr,
+	[GCC_BLSP2_UART1_APPS_CLK] = &gcc_blsp2_uart1_apps_clk.clkr,
+	[GCC_BLSP2_UART2_APPS_CLK] = &gcc_blsp2_uart2_apps_clk.clkr,
+	[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
+	[GCC_CAMSS_AHB_CLK] = &gcc_camss_ahb_clk.clkr,
+	[GCC_CAMSS_CCI_AHB_CLK] = &gcc_camss_cci_ahb_clk.clkr,
+	[GCC_CAMSS_CCI_CLK] = &gcc_camss_cci_clk.clkr,
+	[GCC_CAMSS_CPP_AHB_CLK] = &gcc_camss_cpp_ahb_clk.clkr,
+	[GCC_CAMSS_CPP_CLK] = &gcc_camss_cpp_clk.clkr,
+	[GCC_CAMSS_CSI0PHYTIMER_CLK] = &gcc_camss_csi0phytimer_clk.clkr,
+	[GCC_CAMSS_CSI0PHY_CLK] = &gcc_camss_csi0phy_clk.clkr,
+	[GCC_CAMSS_CSI0PIX_CLK] = &gcc_camss_csi0pix_clk.clkr,
+	[GCC_CAMSS_CSI0RDI_CLK] = &gcc_camss_csi0rdi_clk.clkr,
+	[GCC_CAMSS_CSI0_AHB_CLK] = &gcc_camss_csi0_ahb_clk.clkr,
+	[GCC_CAMSS_CSI0_CLK] = &gcc_camss_csi0_clk.clkr,
+	[GCC_CAMSS_CSI1PHYTIMER_CLK] = &gcc_camss_csi1phytimer_clk.clkr,
+	[GCC_CAMSS_CSI1PHY_CLK] = &gcc_camss_csi1phy_clk.clkr,
+	[GCC_CAMSS_CSI1PIX_CLK] = &gcc_camss_csi1pix_clk.clkr,
+	[GCC_CAMSS_CSI1RDI_CLK] = &gcc_camss_csi1rdi_clk.clkr,
+	[GCC_CAMSS_CSI1_AHB_CLK] = &gcc_camss_csi1_ahb_clk.clkr,
+	[GCC_CAMSS_CSI1_CLK] = &gcc_camss_csi1_clk.clkr,
+	[GCC_CAMSS_CSI2PHY_CLK] = &gcc_camss_csi2phy_clk.clkr,
+	[GCC_CAMSS_CSI2PIX_CLK] = &gcc_camss_csi2pix_clk.clkr,
+	[GCC_CAMSS_CSI2RDI_CLK] = &gcc_camss_csi2rdi_clk.clkr,
+	[GCC_CAMSS_CSI2_AHB_CLK] = &gcc_camss_csi2_ahb_clk.clkr,
+	[GCC_CAMSS_CSI2_CLK] = &gcc_camss_csi2_clk.clkr,
+	[GCC_CAMSS_CSI_VFE0_CLK] = &gcc_camss_csi_vfe0_clk.clkr,
+	[GCC_CAMSS_CSI_VFE1_CLK] = &gcc_camss_csi_vfe1_clk.clkr,
+	[GCC_CAMSS_GP0_CLK] = &gcc_camss_gp0_clk.clkr,
+	[GCC_CAMSS_GP1_CLK] = &gcc_camss_gp1_clk.clkr,
+	[GCC_CAMSS_ISPIF_AHB_CLK] = &gcc_camss_ispif_ahb_clk.clkr,
+	[GCC_CAMSS_JPEG0_CLK] = &gcc_camss_jpeg0_clk.clkr,
+	[GCC_CAMSS_JPEG_AHB_CLK] = &gcc_camss_jpeg_ahb_clk.clkr,
+	[GCC_CAMSS_JPEG_AXI_CLK] = &gcc_camss_jpeg_axi_clk.clkr,
+	[GCC_CAMSS_MCLK0_CLK] = &gcc_camss_mclk0_clk.clkr,
+	[GCC_CAMSS_MCLK1_CLK] = &gcc_camss_mclk1_clk.clkr,
+	[GCC_CAMSS_MCLK2_CLK] = &gcc_camss_mclk2_clk.clkr,
+	[GCC_CAMSS_MICRO_AHB_CLK] = &gcc_camss_micro_ahb_clk.clkr,
+	[GCC_CAMSS_TOP_AHB_CLK] = &gcc_camss_top_ahb_clk.clkr,
+	[GCC_CAMSS_VFE0_AHB_CLK] = &gcc_camss_vfe0_ahb_clk.clkr,
+	[GCC_CAMSS_VFE0_AXI_CLK] = &gcc_camss_vfe0_axi_clk.clkr,
+	[GCC_CAMSS_VFE0_CLK] = &gcc_camss_vfe0_clk.clkr,
+	[GCC_CAMSS_VFE1_AHB_CLK] = &gcc_camss_vfe1_ahb_clk.clkr,
+	[GCC_CAMSS_VFE1_AXI_CLK] = &gcc_camss_vfe1_axi_clk.clkr,
+	[GCC_CAMSS_VFE1_CLK] = &gcc_camss_vfe1_clk.clkr,
+	[GCC_CPP_TBU_CLK] = &gcc_cpp_tbu_clk.clkr,
+	[GCC_CRYPTO_AHB_CLK] = &gcc_crypto_ahb_clk.clkr,
+	[GCC_CRYPTO_AXI_CLK] = &gcc_crypto_axi_clk.clkr,
+	[GCC_CRYPTO_CLK] = &gcc_crypto_clk.clkr,
+	[GCC_DCC_CLK] = &gcc_dcc_clk.clkr,
+	[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
+	[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
+	[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+	[GCC_JPEG_TBU_CLK] = &gcc_jpeg_tbu_clk.clkr,
+	[GCC_MDP_TBU_CLK] = &gcc_mdp_tbu_clk.clkr,
+	[GCC_MDSS_AHB_CLK] = &gcc_mdss_ahb_clk.clkr,
+	[GCC_MDSS_AXI_CLK] = &gcc_mdss_axi_clk.clkr,
+	[GCC_MDSS_BYTE0_CLK] = &gcc_mdss_byte0_clk.clkr,
+	[MSM8937_GCC_MDSS_BYTE1_CLK] = &gcc_mdss_byte1_clk.clkr,
+	[GCC_MDSS_ESC0_CLK] = &gcc_mdss_esc0_clk.clkr,
+	[MSM8937_GCC_MDSS_ESC1_CLK] = &gcc_mdss_esc1_clk.clkr,
+	[GCC_MDSS_MDP_CLK] = &gcc_mdss_mdp_clk.clkr,
+	[GCC_MDSS_PCLK0_CLK] = &gcc_mdss_pclk0_clk.clkr,
+	[MSM8937_GCC_MDSS_PCLK1_CLK] = &gcc_mdss_pclk1_clk.clkr,
+	[GCC_MDSS_VSYNC_CLK] = &gcc_mdss_vsync_clk.clkr,
+	[GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr,
+	[GCC_MSS_Q6_BIMC_AXI_CLK] = &gcc_mss_q6_bimc_axi_clk.clkr,
+	[GCC_OXILI_AHB_CLK] = &gcc_oxili_ahb_clk.clkr,
+	[MSM8937_GCC_OXILI_AON_CLK] = &gcc_oxili_aon_clk.clkr,
+	[GCC_OXILI_GFX3D_CLK] = &gcc_oxili_gfx3d_clk.clkr,
+	[MSM8937_GCC_OXILI_TIMER_CLK] = &gcc_oxili_timer_clk.clkr,
+	[GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr,
+	[GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr,
+	[GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
+	[GCC_QDSS_DAP_CLK] = &gcc_qdss_dap_clk.clkr,
+	[GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr,
+	[GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
+	[GCC_SDCC1_ICE_CORE_CLK] = &gcc_sdcc1_ice_core_clk.clkr,
+	[GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
+	[GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
+	[GCC_SMMU_CFG_CLK] = &gcc_smmu_cfg_clk.clkr,
+	[GCC_USB2A_PHY_SLEEP_CLK] = &gcc_usb2a_phy_sleep_clk.clkr,
+	[GCC_USB_HS_AHB_CLK] = &gcc_usb_hs_ahb_clk.clkr,
+	[GCC_USB_HS_PHY_CFG_AHB_CLK] = &gcc_usb_hs_phy_cfg_ahb_clk.clkr,
+	[GCC_USB_HS_SYSTEM_CLK] = &gcc_usb_hs_system_clk.clkr,
+	[GCC_VENUS0_AHB_CLK] = &gcc_venus0_ahb_clk.clkr,
+	[GCC_VENUS0_AXI_CLK] = &gcc_venus0_axi_clk.clkr,
+	[GCC_VENUS0_CORE0_VCODEC0_CLK] = &gcc_venus0_core0_vcodec0_clk.clkr,
+	[GCC_VENUS0_VCODEC0_CLK] = &gcc_venus0_vcodec0_clk.clkr,
+	[GCC_VENUS_TBU_CLK] = &gcc_venus_tbu_clk.clkr,
+	[GCC_VFE1_TBU_CLK] = &gcc_vfe1_tbu_clk.clkr,
+	[GCC_VFE_TBU_CLK] = &gcc_vfe_tbu_clk.clkr,
+};
+
 static const struct qcom_reset_map gcc_msm8917_resets[] = {
 	[GCC_CAMSS_MICRO_BCR]		= { 0x56008 },
 	[GCC_MSS_BCR]			= { 0x71000 },
@@ -3234,6 +3791,18 @@ static struct gdsc *gcc_msm8917_gdscs[] = {
 	[VFE1_GDSC] = &vfe1_gdsc,
 };
 
+static struct gdsc *gcc_msm8937_gdscs[] = {
+	[CPP_GDSC] = &cpp_gdsc,
+	[JPEG_GDSC] = &jpeg_gdsc,
+	[MDSS_GDSC] = &mdss_gdsc,
+	[OXILI_GX_GDSC] = &oxili_gx_gdsc_msm8937,
+	[MSM8937_OXILI_CX_GDSC] = &oxili_cx_gdsc,
+	[VENUS_CORE0_GDSC] = &venus_core0_gdsc,
+	[VENUS_GDSC] = &venus_gdsc,
+	[VFE0_GDSC] = &vfe0_gdsc,
+	[VFE1_GDSC] = &vfe1_gdsc,
+};
+
 static const struct qcom_cc_desc gcc_msm8917_desc = {
 	.config = &gcc_msm8917_regmap_config,
 	.clks = gcc_msm8917_clocks,
@@ -3254,6 +3823,41 @@ static const struct qcom_cc_desc gcc_qm215_desc = {
 	.num_gdscs = ARRAY_SIZE(gcc_msm8917_gdscs),
 };
 
+static const struct qcom_cc_desc gcc_msm8937_desc = {
+	.config = &gcc_msm8917_regmap_config,
+	.clks = gcc_msm8937_clocks,
+	.num_clks = ARRAY_SIZE(gcc_msm8937_clocks),
+	.resets = gcc_msm8917_resets,
+	.num_resets = ARRAY_SIZE(gcc_msm8917_resets),
+	.gdscs = gcc_msm8937_gdscs,
+	.num_gdscs = ARRAY_SIZE(gcc_msm8937_gdscs),
+};
+
+static void msm8937_clock_override(void)
+{
+	/* GPLL3 750MHz configuration */
+	gpll3_early_config.l = 47;
+	gpll3_early.vco_table = gpll3_p_vco_msm8937;
+	gpll3_early.num_vco = ARRAY_SIZE(gpll3_p_vco_msm8937);
+
+	/*
+	 * Set below clocks for use specific msm8937 parent map.
+	 */
+	vcodec0_clk_src.parent_map = gcc_cpp_map;
+	vcodec0_clk_src.clkr.hw.init = &vcodec0_clk_src_init_msm8937;
+
+	/*
+	 * Set below clocks for use specific msm8937 freq table.
+	 */
+	vfe0_clk_src.freq_tbl = ftbl_vfe_clk_src_msm8937;
+	vfe1_clk_src.freq_tbl = ftbl_vfe_clk_src_msm8937;
+	cpp_clk_src.freq_tbl = ftbl_cpp_clk_src_msm8937;
+	vcodec0_clk_src.freq_tbl = ftbl_vcodec0_clk_src_msm8937;
+	csi0phytimer_clk_src.freq_tbl = ftbl_csi_phytimer_clk_src_msm8937;
+	csi1phytimer_clk_src.freq_tbl = ftbl_csi_phytimer_clk_src_msm8937;
+	usb_hs_system_clk_src.freq_tbl = ftbl_usb_hs_system_clk_src_msm8937;
+}
+
 static int gcc_msm8917_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
@@ -3261,8 +3865,12 @@ static int gcc_msm8917_probe(struct platform_device *pdev)
 
 	gcc_desc = of_device_get_match_data(&pdev->dev);
 
-	if (gcc_desc == &gcc_qm215_desc)
+	if (gcc_desc == &gcc_qm215_desc) {
 		gfx3d_clk_src.parent_map = gcc_gfx3d_map_qm215;
+	} else if (gcc_desc == &gcc_msm8937_desc) {
+		msm8937_clock_override();
+		gfx3d_clk_src.freq_tbl = ftbl_gfx3d_clk_src_msm8937;
+	}
 
 	regmap = qcom_cc_map(pdev, gcc_desc);
 	if (IS_ERR(regmap))
@@ -3276,6 +3884,7 @@ static int gcc_msm8917_probe(struct platform_device *pdev)
 static const struct of_device_id gcc_msm8917_match_table[] = {
 	{ .compatible = "qcom,gcc-msm8917", .data = &gcc_msm8917_desc },
 	{ .compatible = "qcom,gcc-qm215", .data = &gcc_qm215_desc },
+	{ .compatible = "qcom,gcc-msm8937", .data = &gcc_msm8937_desc },
 	{},
 };
 MODULE_DEVICE_TABLE(of, gcc_msm8917_match_table);

-- 
2.51.0

[PATCH v8 3/7] dt-bindings: firmware: qcom,scm: Add MSM8937

[Barnabás Czémán]

Add compatible for MSM8937.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index b913192219e40324c03f4ff1dce955881e7fb3d2..ef97faac7e47c1483f9758d2bb2a13f9c3664177 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -36,6 +36,7 @@ properties:
           - qcom,scm-msm8226
           - qcom,scm-msm8660
           - qcom,scm-msm8916
+          - qcom,scm-msm8937
           - qcom,scm-msm8953
           - qcom,scm-msm8960
           - qcom,scm-msm8974
@@ -134,6 +135,7 @@ allOf:
               - qcom,scm-msm8226
               - qcom,scm-msm8660
               - qcom,scm-msm8916
+              - qcom,scm-msm8937
               - qcom,scm-msm8953
               - qcom,scm-msm8960
               - qcom,scm-msm8974
@@ -177,6 +179,7 @@ allOf:
               - qcom,scm-mdm9607
               - qcom,scm-msm8226
               - qcom,scm-msm8916
+              - qcom,scm-msm8937
               - qcom,scm-msm8953
               - qcom,scm-msm8974
               - qcom,scm-msm8976

-- 
2.51.0

[PATCH v8 4/7] dt-bindings: display/msm/gpu: describe A505 clocks

[Barnabás Czémán]

Descirbe A505 clocks it is using same clocks like A506.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/display/msm/gpu.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 7ef80f9fac8b2927b2a69100a7f6c729d9d188ab..3696b083e353031a496a1f299d8f373270ca562d 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -252,7 +252,7 @@ allOf:
       properties:
         compatible:
           contains:
-            pattern: '^qcom,adreno-506\.[0-9]+$'
+            pattern: '^qcom,adreno-50[56]\.[0-9]+$'
     then:
       properties:
         clocks:

-- 
2.51.0

[PATCH v8 5/7] arm64: dts: qcom: Add initial support for MSM8937

[Barnabás Czémán]

From: Dang Huynh <danct12@riseup.net>

Add initial support for MSM8937 SoC.

Signed-off-by: Dang Huynh <danct12@riseup.net>
Co-developed-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 arch/arm64/boot/dts/qcom/msm8937.dtsi | 2134 +++++++++++++++++++++++++++++++++
 1 file changed, 2134 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8937.dtsi b/arch/arm64/boot/dts/qcom/msm8937.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..c3d7a8b455899fb46e4427135377980a294833dc
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8937.dtsi
@@ -0,0 +1,2134 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
+ */
+
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,gcc-msm8917.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+
+			l2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>;
+				cache-unified;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			device_type = "cpu";
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c0>;
+			next-level-cache = <&l2_0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+
+			l2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x100000>;
+				cache-unified;
+			};
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			next-level-cache = <&l2_1>;
+			enable-method = "psci";
+			operating-points-v2 = <&cpu_opp_table_c1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu-map {
+			/* Little Cores */
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			/* Big Cores */
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+
+				core1 {
+					cpu = <&cpu5>;
+				};
+
+				core2 {
+					cpu = <&cpu6>;
+				};
+
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8937", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core",
+				      "bus",
+				      "iface";
+			#reset-cells = <1>;
+
+			qcom,dload-mode = <&tcsr 0x6100>;
+		};
+	};
+
+	memory@80000000 {
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0x80000000 0 0>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		qseecom_mem: reserved@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 3>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		};
+
+		reserved@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		rmtfs@92100000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x92100000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		adsp_mem: adsp {
+			size = <0x0 0x1100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		mba_mem: mba {
+			size = <0x0 0x100000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		wcnss_mem: wcnss {
+			size = <0x0 0x700000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+
+		venus_mem: venus {
+			size = <0x0 0x400000>;
+			alignment = <0x0 0x100000>;
+			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
+			no-map;
+			status = "disabled";
+		};
+	};
+
+	cpu_opp_table_c0: opp-table-c0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+		};
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+		};
+
+		opp-998400000 {
+			opp-hz = /bits/ 64 <998400000>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+		};
+	};
+
+	cpu_opp_table_c1: opp-table-c1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+		};
+
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+		};
+
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+		};
+
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	rpm: remoteproc {
+		compatible = "qcom,msm8937-rpm-proc", "qcom,rpm-proc";
+
+		smd-edge {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs1 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8937", "qcom,smd-rpm";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: clock-controller {
+					compatible = "qcom,rpmcc-msm8937", "qcom,rpmcc";
+					#clock-cells = <1>;
+					clocks = <&xo_board>;
+					clock-names = "xo";
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8937-rpmpd", "qcom,msm8917-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs1 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mboxes = <0>, <&apcs1 13>, <0>, <&apcs1 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+
+		hexagon_smsm: hexagon@1 {
+			reg = <1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@6 {
+			reg = <6>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0 0 0 0xffffffff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		qfprom: qfprom@a4000 {
+			compatible = "qcom,msm8937-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_base1: base1@1d8 {
+				reg = <0x1d8 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_s5_p1: s5-p1@1d9 {
+				reg = <0x1d9 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s5_p2: s5-p2@1d9 {
+				reg = <0x1d9 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s6_p1: s6-p1@1da {
+				reg = <0x1da 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s6_p2: s6-p2@1db {
+				reg = <0x1db 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_s7_p1: s7-p1@1dc {
+				reg = <0x1dc 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s7_p2: s7-p2@1dc {
+				reg = <0x1dc 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s8_p1: s8-p1@1dd {
+				reg = <0x1dd 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s8_p2: s8-p2@1de {
+				reg = <0x1de 0x1>;
+				bits = <2 6>;
+			};
+
+			tsens_base2: base2@1df {
+				reg = <0x1df 0x1>;
+				bits = <0 8>;
+			};
+
+			tsens_mode: mode@210 {
+				reg = <0x210 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_s0_p1: s0-p1@210 {
+				reg = <0x210 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s0_p2: s0-p2@211 {
+				reg = <0x211 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@211 {
+				reg = <0x211 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@212 {
+				reg = <0x212 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@213 {
+				reg = <0x213 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@214 {
+				reg = <0x214 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@214 {
+				reg = <0x214 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@215 {
+				reg = <0x215 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@216 {
+				reg = <0x216 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@217 {
+				reg = <0x217 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s9_p1: s9-p1@230 {
+				reg = <0x230 0x1>;
+				bits = <0 6>;
+			};
+
+			tsens_s9_p2: s9-p2@230 {
+				reg = <0x230 0x2>;
+				bits = <6 6>;
+			};
+
+			tsens_s10_p1: s10-p1@231 {
+				reg = <0x231 0x2>;
+				bits = <4 6>;
+			};
+
+			tsens_s10_p2: s10-p2@232 {
+				reg = <0x232 0x1>;
+				bits = <2 6>;
+			};
+
+			gpu_speed_bin: gpu-speed-bin@601b {
+				reg = <0x601b 0x1>;
+				bits = <7 1>;
+			};
+		};
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00060000 0x8000>;
+		};
+
+		usb_hs_phy: phy@6c000 {
+			compatible = "qcom,usb-hs-28nm-femtophy";
+			reg = <0x0006c000 0x200>;
+			#phy-cells = <0>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref",
+				      "ahb",
+				      "sleep";
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
+			reset-names = "phy",
+				      "por";
+			status = "disabled";
+		};
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8937-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow";
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>, <&tsens_base2>,
+				      <&tsens_s0_p1>, <&tsens_s0_p2>,
+				      <&tsens_s1_p1>, <&tsens_s1_p2>,
+				      <&tsens_s2_p1>, <&tsens_s2_p2>,
+				      <&tsens_s3_p1>, <&tsens_s3_p2>,
+				      <&tsens_s4_p1>, <&tsens_s4_p2>,
+				      <&tsens_s5_p1>, <&tsens_s5_p2>,
+				      <&tsens_s6_p1>, <&tsens_s6_p2>,
+				      <&tsens_s7_p1>, <&tsens_s7_p2>,
+				      <&tsens_s8_p1>, <&tsens_s8_p2>,
+				      <&tsens_s9_p1>, <&tsens_s9_p2>,
+				      <&tsens_s10_p1>, <&tsens_s10_p2>;
+			nvmem-cell-names = "mode",
+					   "base1", "base2",
+					   "s0_p1", "s0_p2",
+					   "s1_p1", "s1_p2",
+					   "s2_p1", "s2_p2",
+					   "s3_p1", "s3_p2",
+					   "s4_p1", "s4_p2",
+					   "s5_p1", "s5_p2",
+					   "s6_p1", "s6_p2",
+					   "s7_p1", "s7_p2",
+					   "s8_p1", "s8_p2",
+					   "s9_p1", "s9_p2",
+					   "s10_p1", "s10_p2";
+			#qcom,sensors = <11>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x004ab000 0x4>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8917-pinctrl";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 134>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi3_default: blsp1-spi3-default-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi3_sleep: blsp1-spi3-sleep-state {
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp2_spi2_default: blsp2-spi2-default-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <16>;
+					bias-disable;
+				};
+			};
+
+			blsp2_spi2_sleep: blsp2-spi2-sleep-state {
+				cs0-pins {
+					pins = "gpio47";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cs1-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			blsp1_uart1_default: blsp1-uart1-default-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "blsp_uart1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep-state {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default-state {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
+				pins = "gpio4", "gpio5";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_default: sdc1-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_sleep: sdc1-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				sdc2_cmd_default: cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+
+				sdc2_data_default: data-pins {
+					pins = "sdc2_data";
+					drive-strength = <16>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			wcnss_pin_a: wcnss-active-state {
+				wcss-wlan-pins {
+					pins = "gpio79", "gpio80";
+					function = "wcss_wlan";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan0-pins {
+					pins = "gpio78";
+					function = "wcss_wlan0";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan1-pins {
+					pins = "gpio77";
+					function = "wcss_wlan1";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+				wcss-wlan2-pins {
+					pins = "gpio76";
+					function = "wcss_wlan2";
+					drive-strength = <6>;
+					bias-pull-up;
+
+				};
+
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8937";
+			reg = <0x01800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <&sleep_clk>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>;
+			clock-names = "xo",
+				      "sleep",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8937", "syscon";
+			reg = <0x01937000 0x30000>;
+		};
+
+		mdss: display-subsystem@1a00000 {
+			compatible = "qcom,mdss";
+			reg = <0x01a00000 0x1000>,
+			      <0x01ab0000 0x1040>;
+			reg-names = "mdss_phys",
+				    "vbif_phys";
+			ranges;
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			mdp: display-controller@1a01000 {
+				compatible = "qcom,msm8937-mdp5", "qcom,mdp5";
+				reg = <0x01a01000 0x89000>;
+				reg-names = "mdp_phys";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_VSYNC_CLK>;
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
+
+				iommus = <&apps_iommu 0x15>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdp5_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdp5_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@1a94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a94000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+						  <&gcc PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc GCC_MDSS_BYTE0_CLK>,
+					 <&gcc GCC_MDSS_PCLK0_CLK>,
+					 <&gcc GCC_MDSS_ESC0_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi0_opp_table>;
+				power-domains = <&rpmpd MSM8937_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&mdp5_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@1a94400 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a94a00 0xd4>,
+				      <0x01a94400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@1a96000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0x01a96000 0x300>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				assigned-clocks = <&gcc MSM8937_BYTE1_CLK_SRC>,
+						  <&gcc MSM8937_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
+
+				clocks = <&gcc GCC_MDSS_MDP_CLK>,
+					 <&gcc GCC_MDSS_AHB_CLK>,
+					 <&gcc GCC_MDSS_AXI_CLK>,
+					 <&gcc MSM8937_GCC_MDSS_BYTE1_CLK>,
+					 <&gcc MSM8937_GCC_MDSS_PCLK1_CLK>,
+					 <&gcc MSM8937_GCC_MDSS_ESC1_CLK>;
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
+				phys = <&mdss_dsi1_phy>;
+
+				operating-points-v2 = <&mdss_dsi1_opp_table>;
+				power-domains = <&rpmpd MSM8937_VDDCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&mdp5_intf2_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-125000000 {
+						opp-hz = /bits/ 64 <125000000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@1a96a00 {
+				compatible = "qcom,dsi-phy-28nm-8937";
+				reg = <0x01a96a00 0xd4>,
+				      <0x01a96400 0x280>,
+				      <0x01a94b80 0x30>;
+				reg-names = "dsi_pll",
+					    "dsi_phy",
+					    "dsi_phy_regulator";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_MDSS_AHB_CLK>,
+					 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+				clock-names = "iface",
+					      "ref";
+
+				status = "disabled";
+			};
+		};
+
+		gpu: gpu@1c00000 {
+			compatible = "qcom,adreno-505.0", "qcom,adreno";
+			reg = <0x01c00000 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			#cooling-cells = <2>;
+			clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>,
+				 <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_BIMC_GPU_CLK>,
+				 <&gcc MSM8937_GCC_OXILI_TIMER_CLK>,
+				 <&gcc MSM8937_GCC_OXILI_AON_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "mem_iface",
+				      "alt_mem_iface",
+				      "rbbmtimer",
+				      "alwayson";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&gcc OXILI_GX_GDSC>;
+
+			iommus = <&adreno_smmu 0>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_min_svs>;
+				};
+
+				opp-216000000 {
+					opp-hz = /bits/ 64 <216000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+
+				opp-375000000 {
+					opp-hz = /bits/ 64 <375000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_nom_plus>;
+				};
+
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-supported-hw = <0xff>;
+					required-opps = <&rpmpd_opp_turbo>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu@1c40000 {
+			compatible = "qcom,msm8996-smmu-v2",
+				     "qcom,adreno-smmu",
+				     "qcom,smmu-v2";
+			reg = <0x01c40000 0x10000>;
+
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+
+			clocks = <&gcc GCC_BIMC_GFX_CLK>,
+				 <&gcc GCC_OXILI_AHB_CLK>;
+			clock-names = "bus",
+				      "iface";
+
+			power-domains = <&gcc MSM8937_OXILI_CX_GDSC>;
+		};
+
+		apps_iommu: iommu@1e20000 {
+			compatible = "qcom,msm8937-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x01e20000 0x20000>;
+
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface",
+				      "bus";
+
+			qcom,iommu-secure-id = <17>;
+
+			#address-cells = <1>;
+			#iommu-cells = <1>;
+			#size-cells = <1>;
+
+			/* VFE */
+			iommu-ctx@14000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x14000 0x1000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* MDP_0 */
+			iommu-ctx@15000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x15000 0x1000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			/* VENUS_NS */
+			iommu-ctx@16000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x16000 0x1000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0200f000 0x001000>,
+			      <0x02400000 0x800000>,
+			      <0x02c00000 0x800000>,
+			      <0x03800000 0x200000>,
+			      <0x0200a000 0x002100>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		bam_dmux_dma: dma-controller@4044000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x04044000 0x19000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			num-channels = <6>;
+			qcom,num-ees = <1>;
+			qcom,powered-remotely;
+
+			status = "disabled";
+		};
+
+		sdhc_1: mmc@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07824900 0x500>,
+			      <0x07824000 0x800>;
+			reg-names = "hc",
+				    "core";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+			pinctrl-0 = <&sdc1_default>;
+			pinctrl-1 = <&sdc1_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			power-domains = <&rpmpd MSM8937_VDDCX>;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
+		};
+
+		sdhc_2: mmc@7864900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x07864900 0x500>,
+			      <0x07864000 0x800>;
+			reg-names = "hc",
+				    "core";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+			pinctrl-0 = <&sdc2_default>;
+			pinctrl-1 = <&sdc2_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			power-domains = <&rpmpd MSM8937_VDDCX>;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		blsp1_dma: dma-controller@7884000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07884000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <12>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp1_dma 2>,
+			       <&blsp1_dma 3>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			status = "disabled";
+		};
+
+		blsp1_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 6>,
+			       <&blsp1_dma 7>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_i2c2_default>;
+			pinctrl-1 = <&blsp1_i2c2_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp1_dma 8>,
+			       <&blsp1_dma 9>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_i2c3_default>;
+			pinctrl-1 = <&blsp1_i2c3_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_spi3: spi@78b7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp1_dma 8>,
+			       <&blsp1_dma 9>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_spi3_default>;
+			pinctrl-1 = <&blsp1_spi3_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp1_i2c4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b8000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp1_dma 10>,
+			       <&blsp1_dma 11>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp1_i2c4_default>;
+			pinctrl-1 = <&blsp1_i2c4_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma-controller@7ac4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x07ac4000 0x1d000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			qcom,controlled-remotely;
+			#dma-cells = <1>;
+			num-channels = <10>;
+			qcom,num-ees = <4>;
+			qcom,ee = <0>;
+		};
+
+		blsp2_i2c1: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x07af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp2_dma 4>,
+			       <&blsp2_dma 5>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp2_i2c1_default>;
+			pinctrl-1 = <&blsp2_i2c1_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_spi2: spi@7af6000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core",
+				      "iface";
+			dmas = <&blsp2_dma 6>,
+			       <&blsp2_dma 7>;
+			dma-names = "tx",
+				    "rx";
+			pinctrl-0 = <&blsp2_spi2_default>;
+			pinctrl-1 = <&blsp2_spi2_sleep>;
+			pinctrl-names = "default",
+					"sleep";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@78db000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0x078db000 0x200>,
+			      <0x078db200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface",
+				      "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <80000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+		};
+
+		wcnss: remoteproc@a204000 {
+			compatible = "qcom,pronto-v3-pil", "qcom,pronto";
+			reg = <0x0a204000 0x2000>,
+			      <0x0a202000 0x1000>,
+			      <0x0a21b000 0x3000>;
+			reg-names = "ccu",
+				    "dxe",
+				    "pmu";
+
+			memory-region = <&wcnss_mem>;
+
+			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			power-domains = <&rpmpd MSM8937_VDDCX>,
+					<&rpmpd MSM8937_VDDMX>;
+			power-domain-names = "cx",
+					     "mx";
+
+			qcom,smem-states = <&wcnss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			pinctrl-0 = <&wcnss_pin_a>;
+			pinctrl-names = "default";
+
+			status = "disabled";
+
+			wcnss_iris: iris {
+				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+				clock-names = "xo";
+			};
+
+			smd-edge {
+				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+				mboxes = <&apcs1 17>;
+				qcom,smd-edge = <6>;
+				qcom,remote-pid = <4>;
+
+				label = "pronto";
+
+				wcnss_ctrl: wcnss {
+					compatible = "qcom,wcnss";
+					qcom,smd-channels = "WCNSS_CTRL";
+
+					qcom,mmio = <&wcnss>;
+
+					wcnss_bt: bluetooth {
+						compatible = "qcom,wcnss-bt";
+					};
+
+					wcnss_wifi: wifi {
+						compatible = "qcom,wcnss-wlan";
+
+						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+						interrupt-names = "tx",
+								  "rx";
+
+						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+						qcom,smem-state-names = "tx-enable",
+									"tx-rings-empty";
+					};
+				};
+			};
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>,
+			      <0x0b002000 0x1000>;
+		};
+
+		apcs1: mailbox@b011000 {
+			compatible = "qcom,msm8939-apcs-kpss-global", "syscon";
+			reg = <0x0b011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		watchdog@b017000 {
+			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
+			reg = <0x0b017000 0x1000>;
+			clocks = <&sleep_clk>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			frame@b121000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	thermal_zones: thermal-zones {
+		aoss-thermal {
+			thermal-sensors = <&tsens 0>;
+
+			trips {
+				aoss_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				mdm_core_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-thermal {
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				q6_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			thermal-sensors = <&tsens 4>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss1_alert0>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss1_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss1_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss1_crit: cpuss1-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			thermal-sensors = <&tsens 5>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu4_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu4_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			thermal-sensors = <&tsens 6>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu5_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu5_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			thermal-sensors = <&tsens 7>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu6_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu6_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			thermal-sensors = <&tsens 8>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu7_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu7_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_crit: cpu-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			thermal-sensors = <&tsens 9>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpuss0_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpuss0_alert0: trip-point0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpuss0_alert1: trip-point1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpuss0_crit: cpuss0-crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens 10>;
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				gpu_alert: trip-point0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+

-- 
2.51.0

[PATCH v8 6/7] dt-bindings: arm: qcom: Add Xiaomi Redmi 3S

[Barnabás Czémán]

Document Xiaomi Redmi 3S (land).
Add qcom,msm8937 for msm-id, board-id allow-list.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 55e5eb75af8905c93e6604d54d516585f70a8e29..16e003ef0e1892cf8b1d2e5c581358e344b46349 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -191,6 +191,11 @@ properties:
               - xiaomi,riva
           - const: qcom,msm8917
 
+      - items:
+          - enum:
+              - xiaomi,land
+          - const: qcom,msm8937
+
       - items:
           - enum:
               - motorola,potter
@@ -1153,6 +1158,7 @@ allOf:
               - qcom,apq8094
               - qcom,apq8096
               - qcom,msm8917
+              - qcom,msm8937
               - qcom,msm8939
               - qcom,msm8953
               - qcom,msm8956

-- 
2.51.0

[PATCH v8 7/7] arm64: dts: qcom: Add Xiaomi Redmi 3S

[Barnabás Czémán]

Add initial support for Xiaomi Redmi 3S (land).

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
 arch/arm64/boot/dts/qcom/Makefile                |   1 +
 arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts | 381 +++++++++++++++++++++++
 2 files changed, 382 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 94a84770b0802a9dc0c56ce6c59eea20967a5d89..0476a87636584216ba359714ab46a6f085620286 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-yiming-uz801v3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8917-xiaomi-riva.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8929-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8937-xiaomi-land.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-huawei-kiwi.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-longcheer-l9100.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts
new file mode 100644
index 0000000000000000000000000000000000000000..91837ff940f1b6b13a9ef519519f471a7a4cdac0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Barnabas Czeman
+ */
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "msm8937.dtsi"
+#include "pm8937.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Xiaomi Redmi 3S (land)";
+	compatible = "xiaomi,land", "qcom,msm8937";
+	chassis-type = "handset";
+
+	qcom,msm-id = <QCOM_ID_MSM8937 0x0>;
+	qcom,board-id = <0x1000b 1>, <0x2000b 1>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <4100000>;
+		constant-charge-current-max-microamp = <1000000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@8dd01000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>;
+			width = <720>;
+			height = <1280>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+			power-domains = <&gcc MDSS_GDSC>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_keys_default>;
+		pinctrl-names = "default";
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	irled {
+		compatible = "gpio-ir-tx";
+		gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	};
+
+	reserved-memory {
+		reserved@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		framebuffer: memory@8dd01000 {
+			reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&blsp1_i2c2 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc-supply = <&pm8937_l10>;
+		vio-supply = <&pm8937_l5>;
+
+		led@0 {
+			reg = <0>;
+			function = LED_FUNCTION_STATUS;
+			led-max-microamp = <5000>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			function = LED_FUNCTION_STATUS;
+			led-max-microamp = <5000>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			reg = <2>;
+			function = LED_FUNCTION_STATUS;
+			led-max-microamp = <5000>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	status = "okay";
+
+	touchscreen@3e {
+		compatible = "edt,edt-ft5306";
+		reg = <0x3e>;
+
+		interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&pm8937_l10>;
+		iovcc-supply = <&pm8937_l5>;
+
+		pinctrl-0 = <&tsp_int_rst_default>;
+		pinctrl-names = "default";
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+	};
+};
+
+&pm8937_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pm8937_spmi_regulators {
+	/* APC */
+	pm8937_s5: s5 {
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&pmi8950_wled {
+	qcom,num-strings = <2>;
+	qcom,external-pfet;
+	qcom,current-limit-microamp = <20000>;
+	qcom,ovp-millivolt = <29600>;
+
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators-0 {
+		compatible = "qcom,rpm-pm8937-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+
+		vdd_l1_l19-supply = <&pm8937_s3>;
+		vdd_l2_l23-supply = <&pm8937_s3>;
+		vdd_l3-supply = <&pm8937_s3>;
+		vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
+		vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+		vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
+
+		pm8937_s1: s1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8937_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8937_s4: s4 {
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8937_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8937_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l8: l8 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8937_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+			regulator-system-load = <200000>;
+		};
+
+		pm8937_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8937_l13: l13 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+		};
+
+		pm8937_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8937_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8937_l17: l17 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8937_l19: l19 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8937_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8937_l23: l23 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+	};
+};
+
+&sdc2_cmd_default {
+	drive-strength = <12>;
+};
+
+&sdc2_data_default {
+	drive-strength = <12>;
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8937_l8>;
+	vqmmc-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&pm8937_l11>;
+	vqmmc-supply = <&pm8937_l12>;
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <20 4>;
+
+	gpio_keys_default: gpio-keys-default-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_int_rst_default: tsp-int-rst-default-state {
+		pins = "gpio64", "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&wcnss {
+	vddpx-supply = <&pm8937_l5>;
+
+	status = "okay";
+};
+
+&wcnss_iris {
+	compatible = "qcom,wcn3620";
+	vddxo-supply = <&pm8937_l7>;
+	vddrfa-supply = <&pm8937_l19>;
+	vddpa-supply = <&pm8937_l9>;
+	vdddig-supply = <&pm8937_l5>;
+};
+
+&wcnss_mem {
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <19200000>;
+};

-- 
2.51.0

Re: [PATCH v8 3/7] dt-bindings: firmware: qcom,scm: Add MSM8937

[Krzysztof Kozlowski]

On 31/08/2025 14:29, Barnabás Czémán wrote:
> Add compatible for MSM8937.
> 
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 3 +++
>  1 file changed, 3 insertions(+)


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v8 5/7] arm64: dts: qcom: Add initial support for MSM8937

[Dmitry Baryshkov]

On Sun, Aug 31, 2025 at 02:29:28PM +0200, Barnabás Czémán wrote:
> From: Dang Huynh <danct12@riseup.net>
> 
> Add initial support for MSM8937 SoC.
> 
> Signed-off-by: Dang Huynh <danct12@riseup.net>
> Co-developed-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8937.dtsi | 2134 +++++++++++++++++++++++++++++++++
>  1 file changed, 2134 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry