linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yulin Lu <luyulin@eswincomputing.com>
To: linus.walleij@linaro.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: ningyu@eswincomputing.com, zhengyu@eswincomputing.com,
	linmin@eswincomputing.com, huangyifeng@eswincomputing.com,
	fenglin@eswincomputing.com, lianghujun@eswincomputing.com,
	Yulin Lu <luyulin@eswincomputing.com>,
	Dan Carpenter <dan.carpenter@linaro.org>
Subject: [PATCH v2] pinctrl: eswin: Fix regulator error check and Kconfig dependency
Date: Wed,  3 Sep 2025 17:19:15 +0800	[thread overview]
Message-ID: <20250903091915.2026-1-luyulin@eswincomputing.com> (raw)

Smatch reported the following warning in eic7700_pinctrl_probe():

  drivers/pinctrl/pinctrl-eic7700.c:638 eic7700_pinctrl_probe()
  warn: passing zero to 'PTR_ERR'

The root cause is that devm_regulator_get() may return NULL when
CONFIG_REGULATOR is disabled. In such case, IS_ERR_OR_NULL() triggers
PTR_ERR(NULL) which evaluates to 0, leading to passing a success code
as an error.

However, this driver cannot work without a regulator. To fix this:

 - Change the check from IS_ERR_OR_NULL() to IS_ERR()
 - Update Kconfig to explicitly select REGULATOR and
   REGULATOR_FIXED_VOLTAGE, ensuring that the regulator framework is
   always available.

This resolves the Smatch warning and enforces the correct dependency.

Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 5b797bcc00ef ("pinctrl: eswin: Add EIC7700 pinctrl driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/aKRGiZ-fai0bv0tG@stanley.mountain/
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
---
Changes in v2:
 - Add Reported-by with Closes in the commit message.
 - Link to v1:
   https://lore.kernel.org/linux-gpio/20250902094508.288-1-luyulin@eswincomputing.com/
---
 drivers/pinctrl/Kconfig           | 2 ++
 drivers/pinctrl/pinctrl-eic7700.c | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index be1ca8e85754..0402626c4b98 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -211,6 +211,8 @@ config PINCTRL_EIC7700
 	depends on ARCH_ESWIN || COMPILE_TEST
 	select PINMUX
 	select GENERIC_PINCONF
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
 	help
 	  This driver support for the pin controller in ESWIN's EIC7700 SoC,
 	  which supports pin multiplexing, pin configuration,and rgmii voltage
diff --git a/drivers/pinctrl/pinctrl-eic7700.c b/drivers/pinctrl/pinctrl-eic7700.c
index 4874b5532343..ffcd0ec5c2dc 100644
--- a/drivers/pinctrl/pinctrl-eic7700.c
+++ b/drivers/pinctrl/pinctrl-eic7700.c
@@ -634,7 +634,7 @@ static int eic7700_pinctrl_probe(struct platform_device *pdev)
 		return PTR_ERR(pc->base);
 
 	regulator = devm_regulator_get(dev, "vrgmii");
-	if (IS_ERR_OR_NULL(regulator)) {
+	if (IS_ERR(regulator)) {
 		return dev_err_probe(dev, PTR_ERR(regulator),
 					 "failed to get vrgmii regulator\n");
 	}
-- 
2.25.1


             reply	other threads:[~2025-09-03  9:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-03  9:19 Yulin Lu [this message]
2025-09-04 19:29 ` [PATCH v2] pinctrl: eswin: Fix regulator error check and Kconfig dependency Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250903091915.2026-1-luyulin@eswincomputing.com \
    --to=luyulin@eswincomputing.com \
    --cc=dan.carpenter@linaro.org \
    --cc=fenglin@eswincomputing.com \
    --cc=huangyifeng@eswincomputing.com \
    --cc=lianghujun@eswincomputing.com \
    --cc=linmin@eswincomputing.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ningyu@eswincomputing.com \
    --cc=zhengyu@eswincomputing.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).