linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Svyatoslav Ryhel <clamor95@gmail.com>
To: "David Airlie" <airlied@gmail.com>,
	"Simona Vetter" <simona@ffwll.ch>,
	"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
	"Maxime Ripard" <mripard@kernel.org>,
	"Thomas Zimmermann" <tzimmermann@suse.de>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Jonathan Hunter" <jonathanh@nvidia.com>,
	"Sowjanya Komatineni" <skomatineni@nvidia.com>,
	"Luca Ceresoli" <luca.ceresoli@bootlin.com>,
	"Prashant Gaikwad" <pgaikwad@nvidia.com>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Mikko Perttunen" <mperttunen@nvidia.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Svyatoslav Ryhel" <clamor95@gmail.com>,
	"Jonas Schwöbel" <jonasschwoebel@yahoo.de>,
	"Dmitry Osipenko" <digetx@gmail.com>,
	"Charan Pedumuru" <charan.pedumuru@gmail.com>,
	"Diogo Ivo" <diogo.ivo@tecnico.ulisboa.pt>,
	"Aaron Kling" <webgeek1234@gmail.com>,
	"Arnd Bergmann" <arnd@arndb.de>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-media@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-staging@lists.linux.dev
Subject: [PATCH v3 15/22] staging: media: tegra-video: tegra20: simplify format align calculations
Date: Thu, 25 Sep 2025 18:16:41 +0300	[thread overview]
Message-ID: <20250925151648.79510-16-clamor95@gmail.com> (raw)
In-Reply-To: <20250925151648.79510-1-clamor95@gmail.com>

Simplify format align calculations by slightly modifying supported formats
structure. Adjusted U and V offset calculations for planar formats since
YUV420P bits per pixel is 12 (1 full plane for Y + 2 * 1/4 planes for U
and V) so stride is width * 3/2, but offset must be calculated with plain
width since each plain has stride width * 1. This aligns with downstream
behavior which uses same approach for offset calculations.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/staging/media/tegra-video/tegra20.c | 58 +++++++++------------
 drivers/staging/media/tegra-video/vi.h      |  3 +-
 2 files changed, 27 insertions(+), 34 deletions(-)

diff --git a/drivers/staging/media/tegra-video/tegra20.c b/drivers/staging/media/tegra-video/tegra20.c
index 7c3ff843235d..b7a39723dfc2 100644
--- a/drivers/staging/media/tegra-video/tegra20.c
+++ b/drivers/staging/media/tegra-video/tegra20.c
@@ -280,20 +280,8 @@ static void tegra20_fmt_align(struct v4l2_pix_format *pix, unsigned int bpp)
 	pix->width  = clamp(pix->width,  TEGRA20_MIN_WIDTH,  TEGRA20_MAX_WIDTH);
 	pix->height = clamp(pix->height, TEGRA20_MIN_HEIGHT, TEGRA20_MAX_HEIGHT);
 
-	switch (pix->pixelformat) {
-	case V4L2_PIX_FMT_UYVY:
-	case V4L2_PIX_FMT_VYUY:
-	case V4L2_PIX_FMT_YUYV:
-	case V4L2_PIX_FMT_YVYU:
-		pix->bytesperline = roundup(pix->width, 2) * 2;
-		pix->sizeimage = roundup(pix->width, 2) * 2 * pix->height;
-		break;
-	case V4L2_PIX_FMT_YUV420:
-	case V4L2_PIX_FMT_YVU420:
-		pix->bytesperline = roundup(pix->width, 8);
-		pix->sizeimage = roundup(pix->width, 8) * pix->height * 3 / 2;
-		break;
-	}
+	pix->bytesperline = DIV_ROUND_UP(pix->width * bpp, 8);
+	pix->sizeimage = pix->bytesperline * pix->height;
 }
 
 /*
@@ -305,6 +293,7 @@ static void tegra20_channel_queue_setup(struct tegra_vi_channel *chan)
 {
 	unsigned int stride = chan->format.bytesperline;
 	unsigned int height = chan->format.height;
+	unsigned int width = chan->format.width;
 
 	chan->start_offset = 0;
 
@@ -321,8 +310,8 @@ static void tegra20_channel_queue_setup(struct tegra_vi_channel *chan)
 
 	case V4L2_PIX_FMT_YUV420:
 	case V4L2_PIX_FMT_YVU420:
-		chan->addr_offset_u = stride * height;
-		chan->addr_offset_v = chan->addr_offset_u + stride * height / 4;
+		chan->addr_offset_u = width * height;
+		chan->addr_offset_v = chan->addr_offset_u + width * height / 4;
 
 		/* For YVU420, we swap the locations of the U and V planes. */
 		if (chan->format.pixelformat == V4L2_PIX_FMT_YVU420)
@@ -332,14 +321,14 @@ static void tegra20_channel_queue_setup(struct tegra_vi_channel *chan)
 		chan->start_offset_v = chan->addr_offset_v;
 
 		if (chan->vflip) {
-			chan->start_offset   += stride * (height - 1);
-			chan->start_offset_u += (stride / 2) * ((height / 2) - 1);
-			chan->start_offset_v += (stride / 2) * ((height / 2) - 1);
+			chan->start_offset   += width * (height - 1);
+			chan->start_offset_u += (width / 2) * ((height / 2) - 1);
+			chan->start_offset_v += (width / 2) * ((height / 2) - 1);
 		}
 		if (chan->hflip) {
-			chan->start_offset   += stride - 1;
-			chan->start_offset_u += (stride / 2) - 1;
-			chan->start_offset_v += (stride / 2) - 1;
+			chan->start_offset   += width - 1;
+			chan->start_offset_u += (width / 2) - 1;
+			chan->start_offset_v += (width / 2) - 1;
 		}
 		break;
 	}
@@ -576,20 +565,23 @@ static const struct tegra_vi_ops tegra20_vi_ops = {
 	.vi_stop_streaming = tegra20_vi_stop_streaming,
 };
 
-#define TEGRA20_VIDEO_FMT(MBUS_CODE, BPP, FOURCC)	\
-{							\
-	.code    = MEDIA_BUS_FMT_##MBUS_CODE,		\
-	.bpp     = BPP,					\
-	.fourcc  = V4L2_PIX_FMT_##FOURCC,		\
+#define TEGRA20_VIDEO_FMT(DATA_TYPE, BIT_WIDTH, MBUS_CODE, BPP, FOURCC)	\
+{									\
+	.img_dt		= TEGRA_IMAGE_DT_##DATA_TYPE,			\
+	.bit_width	= BIT_WIDTH,					\
+	.code		= MEDIA_BUS_FMT_##MBUS_CODE,			\
+	.bpp		= BPP,						\
+	.fourcc		= V4L2_PIX_FMT_##FOURCC,			\
 }
 
 static const struct tegra_video_format tegra20_video_formats[] = {
-	TEGRA20_VIDEO_FMT(UYVY8_2X8, 2, UYVY),
-	TEGRA20_VIDEO_FMT(VYUY8_2X8, 2, VYUY),
-	TEGRA20_VIDEO_FMT(YUYV8_2X8, 2, YUYV),
-	TEGRA20_VIDEO_FMT(YVYU8_2X8, 2, YVYU),
-	TEGRA20_VIDEO_FMT(UYVY8_2X8, 1, YUV420),
-	TEGRA20_VIDEO_FMT(UYVY8_2X8, 1, YVU420),
+	/* YUV422 */
+	TEGRA20_VIDEO_FMT(YUV422_8, 16, UYVY8_2X8, 16, UYVY),
+	TEGRA20_VIDEO_FMT(YUV422_8, 16, VYUY8_2X8, 16, VYUY),
+	TEGRA20_VIDEO_FMT(YUV422_8, 16, YUYV8_2X8, 16, YUYV),
+	TEGRA20_VIDEO_FMT(YUV422_8, 16, YVYU8_2X8, 16, YVYU),
+	TEGRA20_VIDEO_FMT(YUV422_8, 16, UYVY8_2X8, 12, YUV420),
+	TEGRA20_VIDEO_FMT(YUV422_8, 16, UYVY8_2X8, 12, YVU420),
 };
 
 const struct tegra_vi_soc tegra20_vi_soc = {
diff --git a/drivers/staging/media/tegra-video/vi.h b/drivers/staging/media/tegra-video/vi.h
index bfadde8858d4..5cbc0606ed6c 100644
--- a/drivers/staging/media/tegra-video/vi.h
+++ b/drivers/staging/media/tegra-video/vi.h
@@ -281,7 +281,8 @@ enum tegra_image_dt {
  * @img_dt: MIPI CSI-2 data type (for CSI-2 only)
  * @bit_width: format width in bits per component (for CSI/Tegra210 only)
  * @code: media bus format code
- * @bpp: bytes per pixel (when stored in memory)
+ * @bpp: bytes per pixel (when stored in memory) for Tegra210,
+ *	 bits per pixel for Tegra20/Tegra30
  * @img_fmt: image format (for CSI/Tegra210 only)
  * @fourcc: V4L2 pixel format FCC identifier
  */
-- 
2.48.1


  parent reply	other threads:[~2025-09-25 15:17 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-25 15:16 [PATCH v3 00/22] tegra-video: add CSI support for Tegra20 and Tegra30 Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 01/22] clk: tegra: set CSUS as vi_sensor's gate for Tegra20, Tegra30 and Tegra114 Svyatoslav Ryhel
2025-10-01  4:02   ` Mikko Perttunen
2025-09-25 15:16 ` [PATCH v3 02/22] dt-bindings: clock: tegra30: Add IDs for CSI pad clocks Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 03/22] clk: tegra30: add CSI pad clock gates Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 04/22] dt-bindings: display: tegra: document Tegra30 VI and VIP Svyatoslav Ryhel
2025-10-02  1:19   ` Rob Herring (Arm)
2025-09-25 15:16 ` [PATCH v3 05/22] staging: media: tegra-video: expand VI and VIP support to Tegra30 Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 06/22] staging: media: tegra-video: vi: adjust get_selection op check Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 07/22] staging: media: tegra-video: vi: add flip controls only if no source controls are provided Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 08/22] staging: media: tegra-video: csi: move CSI helpers to header Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 09/22] gpu: host1x: convert MIPI to use operation function pointers Svyatoslav Ryhel
2025-10-01  4:18   ` Mikko Perttunen
2025-09-25 15:16 ` [PATCH v3 10/22] staging: media: tegra-video: vi: improve logic of source requesting Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 11/22] staging: media: tegra-video: csi: move avdd-dsi-csi-supply from VI to CSI Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 12/22] arm64: tegra: move avdd-dsi-csi-supply into CSI node Svyatoslav Ryhel
2025-10-01  4:27   ` Mikko Perttunen
2025-09-25 15:16 ` [PATCH v3 13/22] staging: media: tegra-video: tegra20: set correct maximum width and height Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 14/22] staging: media: tegra-video: tegra20: add support for second output of VI Svyatoslav Ryhel
2025-09-25 15:16 ` Svyatoslav Ryhel [this message]
2025-10-01  4:38   ` [PATCH v3 15/22] staging: media: tegra-video: tegra20: simplify format align calculations Mikko Perttunen
2025-10-01  5:07     ` Svyatoslav Ryhel
2025-10-01  5:35       ` Svyatoslav Ryhel
2025-10-01  7:51         ` Mikko Perttunen
2025-10-01  7:59           ` Svyatoslav Ryhel
2025-10-02  4:00             ` Mikko Perttunen
2025-10-02  5:41               ` Svyatoslav Ryhel
2025-10-02  6:12                 ` Mikko Perttunen
2025-10-02  6:20                   ` Svyatoslav Ryhel
2025-10-06 18:54                     ` Luca Ceresoli
2025-10-07 16:02                       ` Svyatoslav Ryhel
2025-10-07 19:37                         ` Luca Ceresoli
2025-10-08  5:44                           ` Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 16/22] staging: media: tegra-video: tegra20: set VI HW revision Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 17/22] staging: media: tegra-video: tegra20: increase maximum VI clock frequency Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 18/22] staging: media: tegra-video: tegra20: expand format support with RAW8/10 and YUV422 1X16 Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 19/22] staging: media: tegra-video: tegra20: adjust luma buffer stride Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 20/22] dt-bindings: display: tegra: document Tegra20 and Tegra30 CSI Svyatoslav Ryhel
2025-10-02  1:52   ` Rob Herring
2025-10-02  5:14     ` Svyatoslav Ryhel
2025-10-06 20:31       ` Rob Herring
2025-10-07  5:13         ` Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 21/22] ARM: tegra: add CSI nodes for Tegra20 and Tegra30 Svyatoslav Ryhel
2025-09-25 15:16 ` [PATCH v3 22/22] staging: media: tegra-video: add CSI support " Svyatoslav Ryhel
2025-10-01  5:04   ` Mikko Perttunen
2025-10-01  5:15     ` Svyatoslav Ryhel
2025-10-01  6:38       ` Mikko Perttunen
2025-10-01 15:23         ` Svyatoslav Ryhel
2025-10-02  4:03           ` Mikko Perttunen
2025-10-02 17:49     ` Svyatoslav Ryhel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250925151648.79510-16-clamor95@gmail.com \
    --to=clamor95@gmail.com \
    --cc=airlied@gmail.com \
    --cc=arnd@arndb.de \
    --cc=charan.pedumuru@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=diogo.ivo@tecnico.ulisboa.pt \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonasschwoebel@yahoo.de \
    --cc=jonathanh@nvidia.com \
    --cc=krzk+dt@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=linux-tegra@vger.kernel.org \
    --cc=luca.ceresoli@bootlin.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mchehab@kernel.org \
    --cc=mperttunen@nvidia.com \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=pgaikwad@nvidia.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=skomatineni@nvidia.com \
    --cc=thierry.reding@gmail.com \
    --cc=tzimmermann@suse.de \
    --cc=webgeek1234@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).