linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] gpio: fxl6408: Add suspend/resume support
Date: Sun,  2 Nov 2025 18:05:15 +0800	[thread overview]
Message-ID: <20251102100515.9506-3-jszhang@kernel.org> (raw)
In-Reply-To: <20251102100515.9506-1-jszhang@kernel.org>

Currently, during suspend, do nothing; during resume, just sync the
regmap cache to hw regs.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 drivers/gpio/gpio-fxl6408.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/gpio/gpio-fxl6408.c b/drivers/gpio/gpio-fxl6408.c
index ae520305f7a9..805a623ef89c 100644
--- a/drivers/gpio/gpio-fxl6408.c
+++ b/drivers/gpio/gpio-fxl6408.c
@@ -43,6 +43,10 @@
 
 #define FXL6408_NGPIO			8
 
+struct fxl6408_chip {
+	struct regmap *regmap;
+};
+
 static const struct regmap_range rd_range[] = {
 	{ FXL6408_REG_DEVICE_ID, FXL6408_REG_DEVICE_ID },
 	{ FXL6408_REG_IO_DIR, FXL6408_REG_OUTPUT },
@@ -105,6 +109,7 @@ static int fxl6408_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct gpio_desc *reset_gpio;
+	struct fxl6408_chip *chip;
 	int ret;
 	struct gpio_regmap_config gpio_config = {
 		.parent = dev,
@@ -115,6 +120,10 @@ static int fxl6408_probe(struct i2c_client *client)
 		.ngpio_per_reg = FXL6408_NGPIO,
 	};
 
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
 	reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(reset_gpio))
 		return dev_err_probe(dev, PTR_ERR(reset_gpio), "Failed to get reset gpio\n");
@@ -128,6 +137,9 @@ static int fxl6408_probe(struct i2c_client *client)
 	if (ret)
 		return ret;
 
+	chip->regmap = gpio_config.regmap;
+	i2c_set_clientdata(client, chip);
+
 	/* Disable High-Z of outputs, so that our OUTPUT updates actually take effect. */
 	ret = regmap_write(gpio_config.regmap, FXL6408_REG_OUTPUT_HIGH_Z, 0);
 	if (ret)
@@ -136,6 +148,16 @@ static int fxl6408_probe(struct i2c_client *client)
 	return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config));
 }
 
+static int fxl6408_resume(struct device *dev)
+{
+	struct fxl6408_chip *chip = dev_get_drvdata(dev);
+
+	regcache_mark_dirty(chip->regmap);
+	return regcache_sync(chip->regmap);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(fxl6408_pm_ops, NULL, fxl6408_resume);
+
 static const __maybe_unused struct of_device_id fxl6408_dt_ids[] = {
 	{ .compatible = "fcs,fxl6408" },
 	{ }
@@ -151,6 +173,7 @@ MODULE_DEVICE_TABLE(i2c, fxl6408_id);
 static struct i2c_driver fxl6408_driver = {
 	.driver = {
 		.name	= "fxl6408",
+		.pm	= pm_sleep_ptr(&fxl6408_pm_ops),
 		.of_match_table = fxl6408_dt_ids,
 	},
 	.probe		= fxl6408_probe,
-- 
2.51.0


      parent reply	other threads:[~2025-11-02 10:23 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-02 10:05 [PATCH 0/2] gpio: fxl6408: add optional reset and suspend/resume Jisheng Zhang
2025-11-02 10:05 ` [PATCH 1/2] gpio: fxl6408: Add optional reset gpio control Jisheng Zhang
2025-11-02 22:25   ` kernel test robot
2025-11-02 22:35   ` kernel test robot
2025-11-02 10:05 ` Jisheng Zhang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251102100515.9506-3-jszhang@kernel.org \
    --to=jszhang@kernel.org \
    --cc=brgl@bgdev.pl \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).