[PATCH v4 07/20] dt-bindings: firmware: google,gs101-acpm-ipc: add S2MPG11 secondary PMIC

["André Draszik" <andre.draszik@linaro.org>]

In a typical system using the Samsung S2MPG10 PMIC, an S2MPG11 is used
as a sub-PMIC.

The interface for both is the ACPM firmware protocol, so update the
binding to allow the relevant node and update the example here to
describe the connection for both PMICs.

Since we have two PMICs here, but can not use the 'reg' property (as
the addressing is based on software, i.e. the ACPM firmware), the node
names reflect that with their respective suffix. The existing 'pmic'
therefore becomes deprecated in favour of 'pmic-1'.

While at it, update the example.

Signed-off-by: André Draszik <andre.draszik@linaro.org>

---
v4:
- Krzysztof:
  - update commit message / subject
  - pmic -> pmic-1, pmic2 -> pmic-2
---
 .../bindings/firmware/google,gs101-acpm-ipc.yaml   | 50 +++++++++++++++++++++-
 1 file changed, 48 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
index 4a1e3e3c0505aad6669cadf9b7b58aa4c7f284cb..e68f9c3ca5e2619bacc0c8d843ec4984c0947fd8 100644
--- a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
+++ b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
@@ -37,6 +37,7 @@ properties:
     maxItems: 1
 
   pmic:
+    deprecated: true
     description: Child node describing the main PMIC.
     type: object
     additionalProperties: true
@@ -45,6 +46,24 @@ properties:
       compatible:
         const: samsung,s2mpg10-pmic
 
+  pmic-1:
+    description: Child node describing the main PMIC.
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: samsung,s2mpg10-pmic
+
+  pmic-2:
+    description: Child node describing the sub PMIC.
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: samsung,s2mpg11-pmic
+
   shmem:
     description:
       List of phandle pointing to the shared memory (SHM) area. The memory
@@ -62,7 +81,9 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/samsung,s2mpg10-regulator.h>
 
     power-management {
         compatible = "google,gs101-acpm-ipc";
@@ -70,10 +91,12 @@ examples:
         mboxes = <&ap2apm_mailbox>;
         shmem = <&apm_sram>;
 
-        pmic {
+        pmic-1 {
             compatible = "samsung,s2mpg10-pmic";
             interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
 
+            vinl3m-supply = <&buck8m>;
+
             regulators {
                 ldo1m {
                     regulator-name = "vdd_ldo1";
@@ -82,7 +105,13 @@ examples:
                     regulator-always-on;
                 };
 
-                // ...
+                ldo20m {
+                    regulator-name = "vdd_dmics";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    samsung,ext-control = <S2MPG10_EXTCTRL_LDO20M_EN2>;
+                };
 
                 buck8m {
                     regulator-name = "vdd_mif";
@@ -93,4 +122,21 @@ examples:
                 };
             };
         };
+
+        pmic-2 {
+            compatible = "samsung,s2mpg11-pmic";
+            interrupts-extended = <&gpa0 7 IRQ_TYPE_LEVEL_LOW>;
+
+            vinl1s-supply = <&buck8m>;
+            vinl2s-supply = <&buck6s>;
+
+            regulators {
+                buckd {
+                    regulator-name = "vcc_ufs";
+                    regulator-ramp-delay = <6250>;
+                    enable-gpios = <&gpp0 1 GPIO_ACTIVE_HIGH>;
+                    samsung,ext-control = <S2MPG11_EXTCTRL_UFS_EN>;
+                };
+            };
+        };
     };

-- 
2.51.2.1041.gc1ab5b90ca-goog