[PATCH v2 0/5] scmi: Log client subsystem entity counts

[Alex Tran <alex.tran@oss.qualcomm.com>]

SCMI client drivers do not consistently log the number of supported
entities discovered from firmware. This information is useful during
debugging because it shows which domains or resources were exposed by
firmware during probe.

Add logging of the number of supported entities to the SCMI cpufreq,
pinctrl, reset, hwmon, and powercap client drivers after a successful
probe. This aligns these drivers with the existing logging in the SCMI
power and performance domain drivers.

Signed-off-by: Alex Tran <alex.tran@oss.qualcomm.com>
---
Changes in v2:
- Use dev_dbg instead of dev_info log level
- Link to v1: https://lore.kernel.org/r/20260513-scmi-client-probe-log-v1-0-00b47b1be009@oss.qualcomm.com

---
Alex Tran (5):
      powercap: arm_scmi_powercap: Log number of powercap domains
      cpufreq: scmi-cpufreq: Log number of perf domains
      hwmon: scmi-hwmon: Log number of sensors
      reset: reset-scmi: Log number of reset domains
      pinctrl: pinctrl-scmi: Log number of pins, groups, functions

 drivers/cpufreq/scmi-cpufreq.c       |  5 ++++-
 drivers/hwmon/scmi-hwmon.c           |  1 +
 drivers/pinctrl/pinctrl-scmi.c       | 11 ++++++++++-
 drivers/powercap/arm_scmi_powercap.c |  1 +
 drivers/reset/reset-scmi.c           |  8 +++++++-
 5 files changed, 23 insertions(+), 3 deletions(-)
---
base-commit: 1bfaee9d3351b9b32a99766bbfb1f5baed60ddef
change-id: 20260509-scmi-client-probe-log-173cf85d5563

Best regards,
-- 
Alex Tran <alex.tran@oss.qualcomm.com>