Linux GPIO subsystem development
 help / color / mirror / Atom feed
From: Thomas Lin <thomas_lin@lecomputing.com>
To: rafael@kernel.org, lenb@kernel.org, hoan@os.amperecomputing.com,
	linusw@kernel.org, brgl@kernel.org,
	mika.westerberg@linux.intel.com,
	andriy.shevchenko@linux.intel.com, jsd@semihalf.com,
	andi.shyti@kernel.org, broonie@kernel.org
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-spi@vger.kernel.org, lucas_hao@lecomputing.com,
	puntar_liu@lecomputing.com, jihua_tao@lecomputing.com,
	stan_xu@lecomputing.com, lumin_liu@lecomputing.com,
	notics_zhang@lecomputing.com, braden_zhang@lecomputing.com,
	harold_wu@lecomputing.com, will_zhang@lecomputing.com,
	aurora_jiang@lecomputing.com, ryen_lin@lecomputing.com,
	andy_jiang@lecomputing.com,
	Thomas Lin <thomas_lin@lecomputing.com>
Subject: [PATCH v2 2/3] spi: dw-mmio: Add ACPI ID LECA0002 for LECARC SoCs
Date: Fri, 15 May 2026 19:03:19 +0800	[thread overview]
Message-ID: <20260515110322.2883310-3-thomas_lin@lecomputing.com> (raw)
In-Reply-To: <20260515110322.2883310-1-thomas_lin@lecomputing.com>

Add ACPI ID "LECA0002" for LECARC SoCs. This ID requires a custom initialization function dw_spi_hssi_no_dma_init() that sets dws->dws.ip to DW_HSSI_ID.

Signed-off-by: Thomas Lin <thomas_lin@lecomputing.com>
---
 drivers/acpi/acpi_apd.c   | 7 +++++++
 drivers/spi/spi-dw-mmio.c | 7 ++++---
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index bed0791c17fc..4d5a51d30adc 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -181,6 +181,12 @@ static const struct apd_device_desc hip08_spi_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 250000000,
 };
+
+static const struct apd_device_desc leca_spi_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 400000000,
+};
+
 #endif /* CONFIG_ARM64 */
 
 #endif
@@ -251,6 +257,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
 	{ "HISI02A2", APD_ADDR(hip08_i2c_desc) },
 	{ "HISI02A3", APD_ADDR(hip08_lite_i2c_desc) },
 	{ "HISI0173", APD_ADDR(hip08_spi_desc) },
+	{ "LECA0002", APD_ADDR(leca_spi_desc) },
 	{ "NXP0001", APD_ADDR(nxp_i2c_desc) },
 #endif
 	{ }
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 1bfdf24c3227..e131520fe887 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -226,8 +226,8 @@ static int dw_spi_hssi_init(struct platform_device *pdev,
 	return 0;
 }
 
-static int dw_spi_intel_init(struct platform_device *pdev,
-			     struct dw_spi_mmio *dwsmmio)
+static int dw_spi_hssi_no_dma_init(struct platform_device *pdev,
+			           struct dw_spi_mmio *dwsmmio)
 {
 	dwsmmio->dws.ip = DW_HSSI_ID;
 
@@ -438,7 +438,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
 	{ .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init},
 	{ .compatible = "renesas,rzn1-spi", .data = dw_spi_pssi_init},
 	{ .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_hssi_init},
-	{ .compatible = "intel,keembay-ssi", .data = dw_spi_intel_init},
+	{ .compatible = "intel,keembay-ssi", .data = dw_spi_hssi_no_dma_init},
 	{
 		.compatible = "intel,mountevans-imc-ssi",
 		.data = dw_spi_mountevans_imc_init,
@@ -453,6 +453,7 @@ MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id dw_spi_mmio_acpi_match[] = {
 	{"HISI0173", (kernel_ulong_t)dw_spi_pssi_init},
+	{"LECA0002", (kernel_ulong_t)dw_spi_hssi_no_dma_init},
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, dw_spi_mmio_acpi_match);
-- 
2.43.0


  parent reply	other threads:[~2026-05-15 11:04 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-14  3:43 [PATCH 0/3] Add LECARC ACPI IDs for DesignWare GPIO, SPI, I2C thomas
2026-05-14  3:43 ` [PATCH 1/3] Add ACPI ID "LECA0001" for LECARC SoCs that use the DesignWare GPIO controller with V1 register offsets thomas
2026-05-14  3:43 ` [PATCH 2/3] Add ACPI ID "LECA0002" for LECARC SoCs. This ID requires a custom initialization function dw_spi_lecarc_init() that sets dws->dws.ip to DW_HSSI_ID thomas
2026-05-14  3:43 ` [PATCH 3/3] Add ACPI ID "LECA0003" for LECARC SoCs that integrate the DesignWare I2C controller thomas
2026-05-14  7:06 ` [PATCH 0/3] Add LECARC ACPI IDs for DesignWare GPIO, SPI, I2C Mark Brown
2026-05-15 11:03 ` [PATCH v2 0/3] arm64: " Thomas Lin
2026-05-15 11:03   ` [PATCH v2 1/3] gpio: dwapb: Add ACPI ID LECA0001 for LECARC SoCs Thomas Lin
2026-05-15 11:03   ` Thomas Lin [this message]
2026-05-15 11:03   ` [PATCH v2 3/3] i2c: designware: Add ACPI ID LECA0003 " Thomas Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260515110322.2883310-3-thomas_lin@lecomputing.com \
    --to=thomas_lin@lecomputing.com \
    --cc=andi.shyti@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=andy_jiang@lecomputing.com \
    --cc=aurora_jiang@lecomputing.com \
    --cc=braden_zhang@lecomputing.com \
    --cc=brgl@kernel.org \
    --cc=broonie@kernel.org \
    --cc=harold_wu@lecomputing.com \
    --cc=hoan@os.amperecomputing.com \
    --cc=jihua_tao@lecomputing.com \
    --cc=jsd@semihalf.com \
    --cc=lenb@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=lucas_hao@lecomputing.com \
    --cc=lumin_liu@lecomputing.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=notics_zhang@lecomputing.com \
    --cc=puntar_liu@lecomputing.com \
    --cc=rafael@kernel.org \
    --cc=ryen_lin@lecomputing.com \
    --cc=stan_xu@lecomputing.com \
    --cc=will_zhang@lecomputing.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox