[PATCH v2 2/4] dt-bindings: pinctrl: qcom,pmic-gpio: Add level-shifter function

[Fenglin Wu <fenglin.wu@oss.qualcomm.com>]

Add the "level-shifter" function and add the required DT properties to
allow RPMh firmware to control the level-shifter. Introduce a custom
pinconf parameter "qcom,1p2v-1p8v-ls-en" for enabling or disabling the
level-shifter function.

Additionally, add the "groups" property with the allowed group names
that can be used to control the level-shifter function on pmh0101.

Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
---
 .../bindings/pinctrl/qcom,pmic-gpio.yaml           | 66 +++++++++++++++++++++-
 include/dt-bindings/pinctrl/qcom,pmic-gpio.h       |  1 +
 2 files changed, 64 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index b8109e6c2a10..19dc61ddff2d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -119,6 +119,21 @@ properties:
       The first cell will be used to define gpio number and the
       second denotes the flags for this gpio
 
+  qcom,rpmh:
+    description:
+      Phandle to the RPMh controller device. Required for PMICs when the
+      bidirectional level shifters is used (e.g., pmh0101), to enable
+      communication with RPMh firmware for level shifter control.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  qcom,pmic-id:
+    description:
+      The ID of the PMIC which supports bidirectional level shifter function.
+      It is used as the RPMh resource name suffix to request control of the
+      level shifter to the RPMh firmware.
+    $ref: /schemas/types.yaml#/definitions/string
+    pattern: "^[A-N]_E[0-3]+$"
+
 additionalProperties: false
 
 required:
@@ -330,6 +345,22 @@ allOf:
           contains:
             enum:
               - qcom,pmh0101-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 18
+          maxItems: 18
+        gpio-reserved-ranges:
+          minItems: 1
+          maxItems: 9
+        qcom,rpmh: true
+        qcom,pmic-id: true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,pmih0108-gpio
     then:
       properties:
@@ -523,6 +554,19 @@ $defs:
         items:
           pattern: '^gpio([0-9]+)$'
 
+      groups:
+        $ref: /schemas/types.yaml#/definitions/string-array
+        description:
+          List of GPIO groups to apply properties to. Only valid for
+          function "level-shifter" on pmh0101. Valid groups are
+          gpio11, gpio12; gpio13, gpio14; gpio15, gpio16; gpio17, gpio18.
+        items:
+          enum:
+            - gpio11, gpio12
+            - gpio13, gpio14
+            - gpio15, gpio16
+            - gpio17, gpio18
+
       function:
         items:
           - enum:
@@ -536,6 +580,7 @@ $defs:
               - dtest4
               - func3  # supported by LV/MV GPIO subtypes
               - func4  # supported by LV/MV GPIO subtypes
+              - level-shifter  # supported only by pmh0101
 
       bias-disable: true
       bias-pull-down: true
@@ -592,9 +637,24 @@ $defs:
           configured as digital input.
         enum: [1, 2, 3, 4]
 
-    required:
-      - pins
-      - function
+      qcom,1p2v-1p8v-ls-en:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Enable or disable the bidirectional 1.2V/1.8V level shifter
+          associated with the specified GPIO group. When set to 1, an RPMh
+          vote is sent to AOP to enable the level shifter. When set to 0,
+          the vote is withdrawn. Only valid when function is "level-shifter"
+          and groups is a level-shifter GPIO pair (e.g., "gpio11, gpio12"
+          on pmh0101).
+        enum: [0, 1]
+
+    oneOf:
+      - required:
+          - pins
+          - function
+      - required:
+          - groups
+          - function
 
     additionalProperties: false
 
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
index e5df5ce45a0f..b0824d5eb056 100644
--- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
+++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
@@ -105,6 +105,7 @@
 #define PMIC_GPIO_FUNC_DTEST2		"dtest2"
 #define PMIC_GPIO_FUNC_DTEST3		"dtest3"
 #define PMIC_GPIO_FUNC_DTEST4		"dtest4"
+#define PMIC_GPIO_FUNC_LEVEL_SHIFTER	"level-shifter"
 
 #define PM8038_GPIO1_2_LPG_DRV		PMIC_GPIO_FUNC_FUNC1
 #define PM8038_GPIO3_5V_BOOST_EN	PMIC_GPIO_FUNC_FUNC1

-- 
2.43.0