Linux GPIO subsystem development
 help / color / mirror / Atom feed
From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: linusw@kernel.org, brgl@kernel.org, vicencb@gmail.com,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	Sashiko <sashiko-bot@kernel.org>
Subject: [PATCH v2 2/4] gpio: mt7621: more robust management of IRQ domain teardown
Date: Fri, 26 Jun 2026 08:01:10 +0200	[thread overview]
Message-ID: <20260626060112.2498324-3-sergio.paracuellos@gmail.com> (raw)
In-Reply-To: <20260626060112.2498324-1-sergio.paracuellos@gmail.com>

The driver uses devm_gpiochip_add_data() to register the GPIO chips which
means the devres subsystem will unregister them only after the function
'mt7621_gpio_remove()' returns. During the window between domain destruction
and devres unregistering the GPIO chips, the chips are still fully active.
If a consumer or userspace invokes gpiod_to_irq() during this window,
'mt7621_gpio_to_irq()' can dereference the already-freed irq domain pointer.
Thus, manage the IRQ domain teardown using 'devm_add_action_or_reset()' to
guarantee it is destroyed strictly after the GPIO chips are removed.

Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: a46f2e5720f5 ("gpio: mt7621: fix interrupt banks mapping on gpio chips")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/gpio/gpio-mt7621.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
index ceb99641baee..57384ef74703 100644
--- a/drivers/gpio/gpio-mt7621.c
+++ b/drivers/gpio/gpio-mt7621.c
@@ -272,9 +272,9 @@ static const struct irq_chip mt7621_irq_chip = {
 };
 
 static void
-mt7621_gpio_remove(struct platform_device *pdev)
+mt7621_gpio_remove(void *data)
 {
-	struct mtk *priv = platform_get_drvdata(pdev);
+	struct mtk *priv = data;
 	int offset, virq;
 
 	if (priv->gpio_irq > 0)
@@ -475,14 +475,14 @@ mediatek_gpio_probe(struct platform_device *pdev)
 	if (mtk->gpio_irq > 0) {
 		ret = mt7621_gpio_irq_setup(pdev, mtk);
 		if (ret)
-			goto fail;
+			return ret;
 	}
 
-	return 0;
+	ret = devm_add_action_or_reset(dev, mt7621_gpio_remove, mtk);
+	if (ret)
+		return ret;
 
-fail:
-	mt7621_gpio_remove(pdev);
-	return ret;
+	return 0;
 }
 
 static const struct of_device_id mediatek_gpio_match[] = {
@@ -493,7 +493,6 @@ MODULE_DEVICE_TABLE(of, mediatek_gpio_match);
 
 static struct platform_driver mediatek_gpio_driver = {
 	.probe = mediatek_gpio_probe,
-	.remove = mt7621_gpio_remove,
 	.driver = {
 		.name = "mt7621_gpio",
 		.of_match_table = mediatek_gpio_match,
-- 
2.43.0


  parent reply	other threads:[~2026-06-26  6:01 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-26  6:01 [PATCH v2 0/4] gpio: mt7621: address Sashiko complains and other cleanups Sergio Paracuellos
2026-06-26  6:01 ` [PATCH v2 1/4] gpio: mt7621: avoid corruption of shared interrupt trigger state Sergio Paracuellos
2026-06-26  6:01 ` Sergio Paracuellos [this message]
2026-06-26  6:01 ` [PATCH v2 3/4] gpio: mt7621: be sure IRQ domain is created before exposing GPIO chips Sergio Paracuellos
2026-06-30 14:06   ` Bartosz Golaszewski
2026-06-30 14:12     ` Sergio Paracuellos
2026-06-26  6:01 ` [PATCH v2 4/4] gpio: mt7621: unify naming style in driver code Sergio Paracuellos
2026-06-30 14:37 ` (subset) [PATCH v2 0/4] gpio: mt7621: address Sashiko complains and other cleanups Bartosz Golaszewski
2026-06-30 17:33   ` Sergio Paracuellos
2026-07-01  7:04     ` Bartosz Golaszewski
2026-07-01  7:13       ` Sergio Paracuellos
2026-07-06  8:47 ` Bartosz Golaszewski
2026-07-06 12:22   ` Sergio Paracuellos

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260626060112.2498324-3-sergio.paracuellos@gmail.com \
    --to=sergio.paracuellos@gmail.com \
    --cc=brgl@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sashiko-bot@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=vicencb@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox