From: Arnd Bergmann <arnd@kernel.org>
To: linux-gpio@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>,
Thomas Gleixner <tglx@kernel.org>, Ingo Molnar <mingo@redhat.com>,
Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-input@vger.kernel.org, linux-leds@vger.kernel.org
Subject: [PATCH 4/6] [v5] Input: gpio-keys: make legacy gpiolib optional
Date: Mon, 29 Jun 2026 15:03:27 +0200 [thread overview]
Message-ID: <20260629130329.1291953-5-arnd@kernel.org> (raw)
In-Reply-To: <20260629130329.1291953-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
Most users of gpio-keys and gpio-keys-polled use modern gpiolib
interfaces, but there are still number of ancient sh, arm32 and x86
machines that have never been converted.
Add an #ifdef block for the parts of the driver that are only used on
those legacy machines.
The two Rohm PMIC drivers use a gpio-keys device without an actual GPIO,
passing an IRQ number instead. In order to keep this working both with
and with CONFIG_GPIOLIB_LEGACY, change the gpio-keys driver to ignore
the gpio number if an IRQ is passed.
Link: https://lore.kernel.org/all/b3c94552-c104-42e3-be15-7e8362e8039e@gmail.com/
Link: https://lore.kernel.org/all/afJXG4_rtaj3l2Dk@google.com/
Link: https://lore.kernel.org/all/ajQ-CtU131FAJ9ES@google.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v3..v5: resend
v2: skip the fake GPIO number passing from mfd
This patch now has a small conflict with the rework of the rohm drivers
to use software nodes. That patch is the one we want, and then
the drivers/mfd changes here can get dropped, but the two need to
get merged in the correct order.
---
drivers/input/keyboard/gpio_keys.c | 9 +++++----
drivers/input/keyboard/gpio_keys_polled.c | 4 +++-
drivers/mfd/rohm-bd71828.c | 1 -
drivers/mfd/rohm-bd718x7.c | 1 -
include/linux/gpio_keys.h | 2 ++
5 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index e19617485679..e988657f97cb 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -23,8 +23,8 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
-#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
+#include <linux/gpio/legacy.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/spinlock.h>
@@ -528,7 +528,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
*/
bdata->gpiod = NULL;
}
- } else if (gpio_is_valid(button->gpio)) {
+#ifdef CONFIG_GPIOLIB_LEGACY
+ } else if (!button->irq && gpio_is_valid(button->gpio)) {
/*
* Legacy GPIO number, so request the GPIO here and
* convert it to descriptor.
@@ -546,6 +547,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
if (button->active_low ^ gpiod_is_active_low(bdata->gpiod))
gpiod_toggle_active_low(bdata->gpiod);
+#endif
}
if (bdata->gpiod) {
@@ -583,8 +585,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
if (irq < 0) {
error = irq;
dev_err_probe(dev, error,
- "Unable to get irq number for GPIO %d\n",
- button->gpio);
+ "Unable to get irq number for GPIO\n");
return error;
}
bdata->irq = irq;
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index e6707d72210e..4e7a366ff05b 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -18,8 +18,8 @@
#include <linux/input.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
+#include <linux/gpio/legacy.h>
#include <linux/gpio_keys.h>
#include <linux/property.h>
@@ -301,6 +301,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
return dev_err_probe(dev, PTR_ERR(bdata->gpiod),
"failed to get gpio\n");
}
+#ifdef CONFIG_GPIOLIB_LEGACY
} else if (gpio_is_valid(button->gpio)) {
/*
* Legacy GPIO number so request the GPIO here and
@@ -323,6 +324,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
if (button->active_low ^ gpiod_is_active_low(bdata->gpiod))
gpiod_toggle_active_low(bdata->gpiod);
+#endif
}
bdata->last_state = -1;
diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c
index a79f354bf5cb..df6dad762ec9 100644
--- a/drivers/mfd/rohm-bd71828.c
+++ b/drivers/mfd/rohm-bd71828.c
@@ -39,7 +39,6 @@
static struct gpio_keys_button button = {
.code = KEY_POWER,
- .gpio = -1,
.type = EV_KEY,
.wakeup = 1,
};
diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c
index ff714fd4f54d..dd774aa8828b 100644
--- a/drivers/mfd/rohm-bd718x7.c
+++ b/drivers/mfd/rohm-bd718x7.c
@@ -20,7 +20,6 @@
static struct gpio_keys_button button = {
.code = KEY_POWER,
- .gpio = -1,
.type = EV_KEY,
};
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index 80fa930b04c6..e8d6dc290efb 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -25,7 +25,9 @@ struct device;
*/
struct gpio_keys_button {
unsigned int code;
+#ifdef CONFIG_GPIOLIB_LEGACY
int gpio;
+#endif
int active_low;
const char *desc;
unsigned int type;
--
2.39.5
next prev parent reply other threads:[~2026-06-29 13:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-29 13:03 [PATCH v5 0/6] gpiolib: fence off legacy interfaces Arnd Bergmann
2026-06-29 13:03 ` [PATCH 1/6] [v5] sh: select legacy gpiolib interface Arnd Bergmann
2026-06-29 13:03 ` [PATCH 2/6] [v5] x86/olpc: select GPIOLIB_LEGACY Arnd Bergmann
2026-06-29 13:03 ` [PATCH 3/6] [v5] Input: soc_button_array - select CONFIG_GPIOLIB_LEGACY Arnd Bergmann
2026-06-29 13:03 ` Arnd Bergmann [this message]
2026-06-29 13:03 ` [PATCH 5/6] [v5] leds: gpio: make legacy gpiolib interface optional Arnd Bergmann
2026-06-29 15:09 ` Andy Shevchenko
2026-06-29 15:58 ` Arnd Bergmann
2026-06-29 13:03 ` [PATCH 6/6] [v5] gpiolib: turn off legacy interface by default Arnd Bergmann
2026-06-29 16:04 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260629130329.1291953-5-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=brgl@kernel.org \
--cc=dave.hansen@linux.intel.com \
--cc=dmitry.torokhov@gmail.com \
--cc=glaubitz@physik.fu-berlin.de \
--cc=hpa@zytor.com \
--cc=lee@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pavel@kernel.org \
--cc=tglx@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox