Re: [PATCH] pinctrl: rockchip: fix reading pull type on rk3568

["Heiko Stübner" <heiko@sntech.de>]

Am Dienstag, 10. Januar 2023, 18:29:58 CET schrieb Jonas Karlman:
> When reading pinconf-pins from debugfs it fails to get the configured pull
> type on RK3568, "unsupported pinctrl type" error messages is also reported.
> 
> Fix this by adding support for RK3568 in rockchip_get_pull, including a
> reverse of the pull-up value swap applied in rockchip_set_pull so that
> pull-up is correctly reported in pinconf-pins.
> Also update the workaround comment to reflect affected pins, GPIO0_D3-D6.
> 
> Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568")
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> ---
>  drivers/pinctrl/pinctrl-rockchip.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
> index 849d5fa2a362..5eeac92f610a 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -2436,10 +2436,19 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
>  	case RK3308:
>  	case RK3368:
>  	case RK3399:
> +	case RK3568:
>  	case RK3588:
>  		pull_type = bank->pull_type[pin_num / 8];
>  		data >>= bit;
>  		data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1;
> +		/*
> +		 * In the TRM, pull-up being 1 for everything except the GPIO0_D3-D6,
> +		 * where that pull up value becomes 3.
> +		 */
> +		if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {
> +			if (data == 3)
> +				data = 1;
> +		}
>  
>  		return rockchip_pull_list[pull_type][data];
>  	default:
> @@ -2497,7 +2506,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
>  			}
>  		}
>  		/*
> -		 * In the TRM, pull-up being 1 for everything except the GPIO0_D0-D6,
> +		 * In the TRM, pull-up being 1 for everything except the GPIO0_D3-D6,
>  		 * where that pull up value becomes 3.
>  		 */
>  		if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {
>