Re: [PATCH v2 02/14] mfd: pm8008: fix regmap irq chip initialisation

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

On 29/05/2024 17:29, Johan Hovold wrote:
> The regmap irq array is potentially shared between multiple PMICs and
> should only contain static data.
> 
> Use a custom macro to initialise also the type fields and drop the
> unnecessary updates on each probe.
> 
> Fixes: 6b149f3310a4 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC")
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>   drivers/mfd/qcom-pm8008.c | 64 ++++++++++++++-------------------------
>   1 file changed, 23 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
> index 3ac3742f438b..f71c490f25c8 100644
> --- a/drivers/mfd/qcom-pm8008.c
> +++ b/drivers/mfd/qcom-pm8008.c
> @@ -56,15 +56,25 @@ static unsigned int pm8008_config_regs[] = {
>   	INT_POL_LOW_OFFSET,
>   };
>   
> -static struct regmap_irq pm8008_irqs[] = {
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_UVLO,	PM8008_MISC,	BIT(0)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_OVLO,	PM8008_MISC,	BIT(1)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST2,	PM8008_MISC,	BIT(2)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST3,	PM8008_MISC,	BIT(3)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_MISC_LDO_OCP,	PM8008_MISC,	BIT(4)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_TEMP_ALARM,	PM8008_TEMP_ALARM, BIT(0)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_GPIO1,	PM8008_GPIO1,	BIT(0)),
> -	REGMAP_IRQ_REG(PM8008_IRQ_GPIO2,	PM8008_GPIO2,	BIT(0)),
> +#define _IRQ(_irq, _off, _mask, _types)			\
> +	[_irq] = {					\
> +		.reg_offset = (_off),			\
> +		.mask = (_mask),			\
> +		.type = {				\
> +			.type_reg_offset = (_off),	\
> +			.types_supported = (_types),	\
> +		},					\
> +	}
> +
> +static const struct regmap_irq pm8008_irqs[] = {
> +	_IRQ(PM8008_IRQ_MISC_UVLO,    PM8008_MISC,	BIT(0), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_MISC_OVLO,    PM8008_MISC,	BIT(1), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_MISC_OTST2,   PM8008_MISC,	BIT(2), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_MISC_OTST3,   PM8008_MISC,	BIT(3), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_MISC_LDO_OCP, PM8008_MISC,	BIT(4), IRQ_TYPE_EDGE_RISING),
> +	_IRQ(PM8008_IRQ_TEMP_ALARM,   PM8008_TEMP_ALARM,BIT(0), IRQ_TYPE_SENSE_MASK),
> +	_IRQ(PM8008_IRQ_GPIO1,	      PM8008_GPIO1,	BIT(0), IRQ_TYPE_SENSE_MASK),
> +	_IRQ(PM8008_IRQ_GPIO2,	      PM8008_GPIO2,	BIT(0), IRQ_TYPE_SENSE_MASK),
>   };
>   
>   static const unsigned int pm8008_periph_base[] = {
> @@ -143,38 +153,9 @@ static struct regmap_config qcom_mfd_regmap_cfg = {
>   	.max_register	= 0xFFFF,
>   };
>   
> -static int pm8008_probe_irq_peripherals(struct device *dev,
> -					struct regmap *regmap,
> -					int client_irq)
> -{
> -	int rc, i;
> -	struct regmap_irq_type *type;
> -	struct regmap_irq_chip_data *irq_data;
> -
> -	for (i = 0; i < ARRAY_SIZE(pm8008_irqs); i++) {
> -		type = &pm8008_irqs[i].type;
> -
> -		type->type_reg_offset = pm8008_irqs[i].reg_offset;
> -
> -		if (type->type_reg_offset == PM8008_MISC)
> -			type->types_supported = IRQ_TYPE_EDGE_RISING;
> -		else
> -			type->types_supported = (IRQ_TYPE_EDGE_BOTH |
> -				IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
> -	}
ick

A no-brainer improvement.

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>