From: Rojhalat Ibrahim <imr@rtschenk.de>
To: "linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>
Cc: Alexandre Courbot <gnurou@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Grant Likely <grant.likely@linaro.org>,
Mark Brown <broonie@kernel.org>, Gerhard Sittig <gsi@denx.de>
Subject: [PATCH 2/2][v5] gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function
Date: Mon, 16 Jun 2014 15:51:31 +0200 [thread overview]
Message-ID: <4129438.bdYOBL4jO3@pcimr> (raw)
Add a set_multiple function to the MPC8xxx GPIO chip driver and thereby allow
for actual performance improvements when setting multiple outputs
simultaneously. In my case the time needed to configure an FPGA goes down from
48 s to 20 s.
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
---
This patch depends on my previous patch "gpiolib: allow simultaneous setting
of multiple GPIO outputs".
Change log:
v5: - no change
v4: - change interface of the set_multiple driver function to use
unsigned long as type for the bit fields
- use generic bitops (which also use unsigned long for bit fields)
v3: - change commit message
v2: - add this patch (v1 included only changes to gpiolib)
drivers/gpio/gpio-mpc8xxx.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index d7d6d72..d1ff879 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -105,6 +105,32 @@ static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
}
+static void mpc8xxx_gpio_set_multiple(struct gpio_chip *gc,
+ unsigned long *mask, unsigned long *bits)
+{
+ struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
+ struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
+
+ for (i = 0; i < gc->ngpio; i++) {
+ if (*mask == 0)
+ break;
+ if (__test_and_clear_bit(i, mask)) {
+ if (test_bit(i, bits))
+ mpc8xxx_gc->data |= mpc8xxx_gpio2mask(i);
+ else
+ mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(i);
+ }
+ }
+
+ out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
+
+ spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
+}
+
static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
@@ -344,6 +370,7 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
gc->get = of_device_is_compatible(np, "fsl,mpc8572-gpio") ?
mpc8572_gpio_get : mpc8xxx_gpio_get;
gc->set = mpc8xxx_gpio_set;
+ gc->set_multiple = mpc8xxx_gpio_set_multiple;
gc->to_irq = mpc8xxx_gpio_to_irq;
ret = of_mm_gpiochip_add(np, mm_gc);
--
1.8.5.5
next reply other threads:[~2014-06-16 13:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-16 13:51 Rojhalat Ibrahim [this message]
2014-06-21 7:11 ` [PATCH 2/2][v5] gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function Alexandre Courbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4129438.bdYOBL4jO3@pcimr \
--to=imr@rtschenk.de \
--cc=broonie@kernel.org \
--cc=gnurou@gmail.com \
--cc=grant.likely@linaro.org \
--cc=gsi@denx.de \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).