From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
Cc: "Geert Uytterhoeven" <geert+renesas@glider.be>,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: Re: [PATCHv2 2/6] pinctrl: sh-pfc: Add helper to handle bias lookup table
Date: Sat, 12 Nov 2016 03:46:11 +0200 [thread overview]
Message-ID: <4161854.1CIEq2dT0e@avalon> (raw)
In-Reply-To: <20161111203021.3384-3-niklas.soderlund@ragnatech.se>
Hi Niklas,
Thank you for the patch.
On Friday 11 Nov 2016 21:30:17 Niklas Söderlund wrote:
> From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>
> On some SoC there are no simple mapping of pins to bias register bits
> and a lookup table is needed. This logic is already implemented in some
> SoC specific drivers that could benefit from a generic implementation.
>
> Add helpers to deal with the lookup which later can be used by the SoC
> specific drivers. The logic used to lookup are different from the one it
> aims to replace, this is intentional. This new method reduces the memory
> consumption at the cost of increased CPU usage and fix a bug where a
> WARN() would incorrectly be triggered if the register offset is 0.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/pinctrl/sh-pfc/core.c | 16 ++++++++++++++++
> drivers/pinctrl/sh-pfc/core.h | 4 ++++
> drivers/pinctrl/sh-pfc/sh_pfc.h | 6 ++++++
> 3 files changed, 26 insertions(+)
>
> diff --git a/drivers/pinctrl/sh-pfc/core.c b/drivers/pinctrl/sh-pfc/core.c
> index f3a8897..8e38df7 100644
> --- a/drivers/pinctrl/sh-pfc/core.c
> +++ b/drivers/pinctrl/sh-pfc/core.c
> @@ -389,6 +389,22 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned
> mark, int pinmux_type) return 0;
> }
>
> +int sh_pfc_pin_to_bias_info(const struct sh_pfc_bias_info *pullups,
> + unsigned int num, unsigned int pin,
> + struct sh_pfc_bias_info *info)
How about returning a const struct sh_pfc_bias_info * instead ? This would
avoid copying the data into the *info argument. You could then rename pullups
to info (I don't really like the pullups name as the table can contain
pulldown information as well).
> +{
> + unsigned int i;
> +
> + for (i = 0; i < num; i++) {
> + if (pullups[i].pin == pin) {
> + *info = pullups[i];
> + return 0;
> + }
> + }
> +
> + return WARN_ON_ONCE(-EINVAL);
> +}
> +
> static int sh_pfc_init_ranges(struct sh_pfc *pfc)
> {
> struct sh_pfc_pin_range *range;
> diff --git a/drivers/pinctrl/sh-pfc/core.h b/drivers/pinctrl/sh-pfc/core.h
> index 0bbdea58..d902cd2 100644
> --- a/drivers/pinctrl/sh-pfc/core.h
> +++ b/drivers/pinctrl/sh-pfc/core.h
> @@ -33,4 +33,8 @@ void sh_pfc_write_reg(struct sh_pfc *pfc, u32 reg,
> unsigned int width, int sh_pfc_get_pin_index(struct sh_pfc *pfc, unsigned
> int pin);
> int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type);
>
> +int sh_pfc_pin_to_bias_info(const struct sh_pfc_bias_info *pullups,
> + unsigned int num, unsigned int pin,
> + struct sh_pfc_bias_info *info);
> +
> #endif /* __SH_PFC_CORE_H__ */
> diff --git a/drivers/pinctrl/sh-pfc/sh_pfc.h
> b/drivers/pinctrl/sh-pfc/sh_pfc.h index 2345421..fc82b6d 100644
> --- a/drivers/pinctrl/sh-pfc/sh_pfc.h
> +++ b/drivers/pinctrl/sh-pfc/sh_pfc.h
> @@ -189,6 +189,12 @@ struct sh_pfc_window {
> unsigned long size;
> };
>
> +struct sh_pfc_bias_info {
> + unsigned int pin;
You should make this a u16, otherwise the structure will be padded to 8 bytes
anyway, removing the benefit of storing reg and bit in 16 bits.
> + u16 reg : 11;
> + u16 bit : 5;
> +};
> +
> struct sh_pfc_pin_range;
>
> struct sh_pfc {
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2016-11-12 1:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-11 20:30 [PATCHv2 0/6] pinctrl: sh-pfc: Fixups for bias handling and preparation for none GPIO pins Niklas Söderlund
2016-11-11 20:30 ` [PATCHv2 1/6] pinctrl: sh-pfc: Do not unconditionally support PIN_CONFIG_BIAS_DISABLE Niklas Söderlund
2016-11-11 20:30 ` [PATCHv2 2/6] pinctrl: sh-pfc: Add helper to handle bias lookup table Niklas Söderlund
2016-11-12 1:46 ` Laurent Pinchart [this message]
2016-11-12 13:41 ` Niklas Söderlund
2016-11-11 20:30 ` [PATCHv2 3/6] pinctrl: sh-pfc: r8a7795: Simplify get bias logic Niklas Söderlund
2016-11-11 22:42 ` Laurent Pinchart
2016-11-11 20:30 ` [PATCHv2 4/6] pinctrl: sh-pfc: r8a7795: Use lookup function for bias data Niklas Söderlund
2016-11-12 1:47 ` Laurent Pinchart
2016-11-12 13:44 ` Niklas Söderlund
2016-11-11 20:30 ` [PATCHv2 5/6] pinctrl: sh-pfc: r8a7778: " Niklas Söderlund
2016-11-11 20:30 ` [PATCHv2 6/6] pinctrl: sh-pfc: Support named pins with custom configuration Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4161854.1CIEq2dT0e@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=geert+renesas@glider.be \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=niklas.soderlund@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).