From: Alexander Sverdlin <alexander.sverdlin@gmail.com>
To: Nikita Shubin <nikita.shubin@maquefel.me>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 2/7] gpio: ep93xx: Fix single irqchip with multi gpiochips
Date: Mon, 08 Feb 2021 16:48:17 +0100 [thread overview]
Message-ID: <423724a1de34c22327a17b0919bf2f1398c27706.camel@gmail.com> (raw)
In-Reply-To: <20210208085954.30050-3-nikita.shubin@maquefel.me>
Hello Nikita,
On Mon, 2021-02-08 at 11:59 +0300, Nikita Shubin wrote:
> Fixes the following warnings which results in interrupts disabled on
> port B/F:
>
> gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver.
> gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver.
>
> - added separate irqchip for each interrupt capable gpiochip
> - provided unique names for each irqchip
>
> Fixes: d2b091961510 ("gpio: ep93xx: Pass irqchip when adding gpiochip")
> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
I performed a bootup with the whole patch-series and
confirm that the warning is gone. Thank you for looking into this!
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> ---
> v4->v5:
> - generate IRQ chip's names dynamicaly from label
> ---
> drivers/gpio/gpio-ep93xx.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
> index 64d6c2b4282e..3d8eb8769470 100644
> --- a/drivers/gpio/gpio-ep93xx.c
> +++ b/drivers/gpio/gpio-ep93xx.c
> @@ -38,6 +38,7 @@
> #define EP93XX_GPIO_F_IRQ_BASE 80
>
> struct ep93xx_gpio_irq_chip {
> + struct irq_chip ic;
> u8 irq_offset;
> u8 int_unmasked;
> u8 int_enabled;
> @@ -331,6 +332,16 @@ static int ep93xx_gpio_f_to_irq(struct gpio_chip *gc, unsigned offset)
> return EP93XX_GPIO_F_IRQ_BASE + offset;
> }
>
> +static void ep93xx_init_irq_chip(struct device *dev, struct irq_chip *ic, const char *label)
> +{
> + ic->name = devm_kasprintf(dev, GFP_KERNEL, "gpio-irq-%s", label);
> + ic->irq_ack = ep93xx_gpio_irq_ack;
> + ic->irq_mask_ack = ep93xx_gpio_irq_mask_ack;
> + ic->irq_mask = ep93xx_gpio_irq_mask;
> + ic->irq_unmask = ep93xx_gpio_irq_unmask;
> + ic->irq_set_type = ep93xx_gpio_irq_type;
> +}
> +
> static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
> struct platform_device *pdev,
> struct ep93xx_gpio *epg,
> @@ -352,6 +363,8 @@ static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
>
> girq = &gc->irq;
> if (bank->has_irq || bank->has_hierarchical_irq) {
> + struct irq_chip *ic;
> +
> gc->set_config = ep93xx_gpio_set_config;
> egc->eic = devm_kcalloc(dev, 1,
> sizeof(*egc->eic),
> @@ -359,7 +372,9 @@ static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
> if (!egc->eic)
> return -ENOMEM;
> egc->eic->irq_offset = bank->irq;
> - girq->chip = &ep93xx_gpio_irq_chip;
> + ic = &egc->eic->ic;
> + ep93xx_init_irq_chip(dev, ic, bank->label);
> + girq->chip = ic;
> }
>
> if (bank->has_irq) {
--
Alexander Sverdlin.
next prev parent reply other threads:[~2021-02-08 15:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-08 8:59 [PATCH v5 0/7] gpio: ep93xx: fixes series patch Nikita Shubin
2021-02-08 8:59 ` [PATCH v5 1/7] gpio: ep93xx: fix BUG_ON port F usage Nikita Shubin
2021-02-08 15:43 ` Alexander Sverdlin
2021-02-08 8:59 ` [PATCH v5 2/7] gpio: ep93xx: Fix single irqchip with multi gpiochips Nikita Shubin
2021-02-08 13:20 ` Andy Shevchenko
2021-02-09 12:33 ` Nikita Shubin
2021-02-09 12:46 ` Andy Shevchenko
2021-02-09 12:54 ` Nikita Shubin
2021-02-09 13:51 ` Andy Shevchenko
2021-02-08 15:48 ` Alexander Sverdlin [this message]
2021-02-08 8:59 ` [PATCH v5 3/7] gpio: ep93xx: Fix wrong irq numbers in port F Nikita Shubin
2021-02-08 8:59 ` [PATCH v5 4/7] gpio: ep93xx: drop to_irq binding Nikita Shubin
2021-02-08 8:59 ` [PATCH v5 5/7] gpio: ep93xx: Fix typo s/hierarchial/hierarchical Nikita Shubin
2021-02-08 8:59 ` [PATCH v5 6/7] gpio: ep93xx: refactor ep93xx_gpio_add_bank Nikita Shubin
2021-02-08 8:59 ` [PATCH v5 7/7] gpio: ep93xx: refactor base IRQ number Nikita Shubin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=423724a1de34c22327a17b0919bf2f1398c27706.camel@gmail.com \
--to=alexander.sverdlin@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nikita.shubin@maquefel.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).