From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Prabhakar <prabhakar.csengg@gmail.com>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Magnus Damm <magnus.damm@gmail.com>
Cc: linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Biju Das <biju.das.jz@bp.renesas.com>,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
Paul Barker <paul.barker.ct@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: Re: [PATCH v3 06/15] pinctrl: renesas: pinctrl-rzg2l: Validate power registers for SD and ETH
Date: Mon, 10 Jun 2024 08:53:13 +0300 [thread overview]
Message-ID: <48262d5c-4dde-40c5-991c-f373f24b2018@tuxon.dev> (raw)
In-Reply-To: <20240530173857.164073-7-prabhakar.mahadev-lad.rj@bp.renesas.com>
On 30.05.2024 20:38, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
> On RZ/V2H(P) SoC, the power registers for SD and ETH do not exist,
> resulting in invalid register offsets. Ensure that the register offsets
> are valid before any read/write operations are performed. If the power
> registers are not available, both SD and ETH will be set to '0'.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S
> ---
> v2->v3
> - Included RB tag
>
> RFC->v2
> - Update check to != 0 instead of -EINVAL
> ---
> drivers/pinctrl/renesas/pinctrl-rzg2l.c | 12 ++++++++----
> 1 file changed, 8 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> index 89716e842c63..6e3b1adb95f6 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -2503,8 +2503,10 @@ static int rzg2l_pinctrl_suspend_noirq(struct device *dev)
> rzg2l_pinctrl_pm_setup_dedicated_regs(pctrl, true);
>
> for (u8 i = 0; i < 2; i++) {
> - cache->sd_ch[i] = readb(pctrl->base + SD_CH(regs->sd_ch, i));
> - cache->eth_poc[i] = readb(pctrl->base + ETH_POC(regs->eth_poc, i));
> + if (regs->sd_ch)
> + cache->sd_ch[i] = readb(pctrl->base + SD_CH(regs->sd_ch, i));
> + if (regs->eth_poc)
> + cache->eth_poc[i] = readb(pctrl->base + ETH_POC(regs->eth_poc, i));
> }
>
> cache->qspi = readb(pctrl->base + QSPI);
> @@ -2535,8 +2537,10 @@ static int rzg2l_pinctrl_resume_noirq(struct device *dev)
> writeb(cache->qspi, pctrl->base + QSPI);
> writeb(cache->eth_mode, pctrl->base + ETH_MODE);
> for (u8 i = 0; i < 2; i++) {
> - writeb(cache->sd_ch[i], pctrl->base + SD_CH(regs->sd_ch, i));
> - writeb(cache->eth_poc[i], pctrl->base + ETH_POC(regs->eth_poc, i));
> + if (regs->sd_ch)
> + writeb(cache->sd_ch[i], pctrl->base + SD_CH(regs->sd_ch, i));
> + if (regs->eth_poc)
> + writeb(cache->eth_poc[i], pctrl->base + ETH_POC(regs->eth_poc, i));
> }
>
> rzg2l_pinctrl_pm_setup_pfc(pctrl);
next prev parent reply other threads:[~2024-06-10 5:53 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-30 17:38 [PATCH v3 00/15] Add PFC support for Renesas RZ/V2H(P) SoC Prabhakar
2024-05-30 17:38 ` [PATCH v3 01/15] dt-bindings: pinctrl: renesas: Document " Prabhakar
2024-06-04 15:36 ` Rob Herring
2024-06-05 9:39 ` Lad, Prabhakar
2024-06-06 7:13 ` Geert Uytterhoeven
2024-06-06 8:37 ` Lad, Prabhakar
2024-06-06 8:40 ` Geert Uytterhoeven
2024-06-06 8:43 ` Lad, Prabhakar
2024-05-30 17:38 ` [PATCH v3 02/15] pinctrl: renesas: pinctrl-rzg2l: Rename B0WI to BOWI Prabhakar
2024-06-05 11:39 ` Geert Uytterhoeven
2024-06-05 15:42 ` Lad, Prabhakar
2024-06-10 5:52 ` claudiu beznea
2024-05-30 17:38 ` [PATCH v3 03/15] pinctrl: renesas: pinctrl-rzg2l: Allow more bits for pin configuration Prabhakar
2024-06-05 11:41 ` Geert Uytterhoeven
2024-06-10 5:52 ` claudiu beznea
2024-05-30 17:38 ` [PATCH v3 04/15] pinctrl: renesas: pinctrl-rzg2l: Drop struct rzg2l_variable_pin_cfg Prabhakar
2024-06-05 11:46 ` Geert Uytterhoeven
2024-06-10 5:52 ` claudiu beznea
2024-05-30 17:38 ` [PATCH v3 05/15] pinctrl: renesas: pinctrl-rzg2l: Allow parsing of variable configuration for all architectures Prabhakar
2024-06-10 5:53 ` claudiu beznea
2024-05-30 17:38 ` [PATCH v3 06/15] pinctrl: renesas: pinctrl-rzg2l: Validate power registers for SD and ETH Prabhakar
2024-06-10 5:53 ` claudiu beznea [this message]
2024-05-30 17:38 ` [PATCH v3 07/15] pinctrl: renesas: pinctrl-rzg2l: Add function pointer for locking/unlocking the PFC register Prabhakar
2024-06-05 11:52 ` Geert Uytterhoeven
2024-06-10 5:53 ` claudiu beznea
2024-05-30 17:38 ` [PATCH v3 08/15] pinctrl: renesas: pinctrl-rzg2l: Add function pointer for writing to PMC register Prabhakar
2024-06-05 12:13 ` Geert Uytterhoeven
2024-06-10 5:53 ` claudiu beznea
2024-05-30 17:38 ` [PATCH v3 09/15] pinctrl: renesas: pinctrl-rzg2l: Add function pointers for reading/writing OEN register Prabhakar
2024-06-05 12:16 ` Geert Uytterhoeven
2024-06-10 5:55 ` claudiu beznea
2024-05-30 17:38 ` [PATCH v3 10/15] pinctrl: renesas: pinctrl-rzg2l: Add support to configure the slew-rate Prabhakar
2024-05-30 17:38 ` [PATCH v3 11/15] pinctrl: renesas: pinctrl-rzg2l: Add support to set pulling up/down the pins Prabhakar
2024-06-05 12:23 ` Geert Uytterhoeven
2024-05-30 17:38 ` [PATCH v3 12/15] pinctrl: renesas: pinctrl-rzg2l: Pass pincontrol device pointer to pinconf_generic_parse_dt_config() Prabhakar
2024-06-10 5:57 ` claudiu beznea
2024-05-30 17:38 ` [PATCH v3 13/15] pinctrl: renesas: pinctrl-rzg2l: Add support for custom parameters Prabhakar
2024-06-05 12:24 ` Geert Uytterhoeven
2024-05-30 17:38 ` [PATCH v3 14/15] pinctrl: renesas: pinctrl-rzg2l: Acquire lock in rzg2l_pinctrl_pm_setup_pfc() Prabhakar
2024-06-05 12:32 ` Geert Uytterhoeven
2024-06-10 5:57 ` claudiu beznea
2024-05-30 17:38 ` [PATCH v3 15/15] pinctrl: renesas: pinctrl-rzg2l: Add support for RZ/V2H SoC Prabhakar
2024-06-05 12:39 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48262d5c-4dde-40c5-991c-f373f24b2018@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=biju.das.jz@bp.renesas.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=paul.barker.ct@bp.renesas.com \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).