linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alex Courbot <acourbot@nvidia.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] gpiolib: return -ENOENT when no GPIO mapping exists
Date: Tue, 10 Dec 2013 12:10:56 +0900	[thread overview]
Message-ID: <52A68640.5010806@nvidia.com> (raw)
In-Reply-To: <1386584927.1871.127.camel@smile>

On 12/09/2013 07:28 PM, Andy Shevchenko wrote:
> On Fri, 2013-12-06 at 11:06 +0900, Alexandre Courbot wrote:
>> Some devices drivers make use of optional GPIO parameters. For such
>> drivers, it is important to discriminate between the case where no
>> GPIO mapping has been defined for the function they are requesting, and
>> the case where a mapping exists but an error occured while resolving it
>> or when acquiring the GPIO.
>>
>> This patch changes the family of gpiod_get() functions such that they
>> will return -ENOENT if and only if no GPIO mapping is defined for the
>> requested function. Other error codes are used when an actual error
>> occured during the GPIO resolution.
>>
>
> I like the idea.
> One minor comment below (in code).
>
>> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
>> ---
>> I think this change should be merged early as not having it may prevent
>> some users to switch to gpiod. I stumbled upon this issue while
>> considering porting a simple driver (pwm_bl) that has an optional GPIO
>> parameter.
>>
>> Mika, Andy: if Linus agrees with this change, could you take care of
>> having -ENOENT returned as well for the ACPI and SFI GPIOs lookup?
>
> I have already switched to -ENOENT, so, consider done.

Great, thanks!

>> My understanding of ACPI was not sufficient to allow me to do it myself.
>> SFI OTOH should be trivial as it is a simple table.
>>
>>   Documentation/gpio/consumer.txt |  6 +++++-
>>   drivers/gpio/gpiolib.c          | 31 ++++++++++++++++---------------
>>   2 files changed, 21 insertions(+), 16 deletions(-)
>>
>> diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
>> index 07c74a3765a0..e42f77d8d4ca 100644
>> --- a/Documentation/gpio/consumer.txt
>> +++ b/Documentation/gpio/consumer.txt
>> @@ -38,7 +38,11 @@ device that displays digits), an additional index argument can be specified:
>>   					  const char *con_id, unsigned int idx)
>>
>>   Both functions return either a valid GPIO descriptor, or an error code checkable
>> -with IS_ERR(). They will never return a NULL pointer.
>> +with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned
>> +if and only if no GPIO has been assigned to the device/function/index triplet,
>> +other error codes are used for cases where a GPIO has been assigned but an error
>> +occured while trying to acquire it. This is useful to discriminate between mere
>> +errors and an absence of GPIO for optional GPIO parameters.
>>
>>   Device-managed variants of these functions are also defined:
>>
>> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
>> index 5fad38fcd701..e96d4a90c0c3 100644
>> --- a/drivers/gpio/gpiolib.c
>> +++ b/drivers/gpio/gpiolib.c
>> @@ -2358,7 +2358,7 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
>>   				    unsigned int idx,
>>   				    enum gpio_lookup_flags *flags)
>>   {
>> -	struct gpio_desc *desc = ERR_PTR(-ENODEV);
>> +	struct gpio_desc *desc = ERR_PTR(-ENOENT);
>>   	struct gpiod_lookup_table *table;
>>   	struct gpiod_lookup *p;
>>
>> @@ -2380,19 +2380,21 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
>>   		chip = find_chip_by_name(p->chip_label);
>>
>>   		if (!chip) {
>> -			dev_warn(dev, "cannot find GPIO chip %s\n",
>> -				 p->chip_label);
>> -			continue;
>> +			dev_err(dev, "cannot find GPIO chip %s\n",
>> +				p->chip_label);
>> +			return ERR_PTR(-ENODEV);
>>   		}
>>
>>   		if (chip->ngpio <= p->chip_hwnum) {
>> -			dev_warn(dev, "GPIO chip %s has %d GPIOs\n",
>> -				 chip->label, chip->ngpio);
>> -			continue;
>> +			dev_err(dev, "requested GPIO %d but chip %s has %d\n",
>
> The proposed message may confuse user. This lead to question in my head:
> "what gpio chip has that referred by %d at the end of line".
>
> Maybe something like "requested GPIO %d is out of range [0..%d] for chip
> %s\n" ?

I agree it would be better. My concern here is to have the line fit 
within 80 characters. :P

But you're right, I will improve this in v2.

Thanks,
Alex.

  reply	other threads:[~2013-12-10  3:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-06  2:06 [PATCH] gpiolib: return -ENOENT when no GPIO mapping exists Alexandre Courbot
2013-12-09 10:28 ` Andy Shevchenko
2013-12-10  3:10   ` Alex Courbot [this message]
2013-12-09 12:40 ` Mika Westerberg
2013-12-10  3:11   ` Alex Courbot
2013-12-09 14:12 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52A68640.5010806@nvidia.com \
    --to=acourbot@nvidia.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).