From mboxrd@z Thu Jan  1 00:00:00 1970
From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Subject: Re: [PATCH] gpio: gpio-rcar: init at postcore level
Date: Mon, 24 Feb 2014 11:42:23 +0400
Message-ID: <530AF7DF.1000004@cogentembedded.com>
References: <1393173467-12240-1-git-send-email-vladimir.barinov@cogentembedded.com> <CANqRtoSu7HMCkqeefBFdMgEPvVZNDEK8k7=1OHp1wf5GRizBvA@mail.gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-sh-owner@vger.kernel.org>
In-Reply-To: <CANqRtoSu7HMCkqeefBFdMgEPvVZNDEK8k7=1OHp1wf5GRizBvA@mail.gmail.com>
Sender: linux-sh-owner@vger.kernel.org
To: Magnus Damm <magnus.damm@gmail.com>
Cc: SH-Linux <linux-sh@vger.kernel.org>, Linus Walleij <linus.walleij@linaro.org>, linux-gpio <linux-gpio@vger.kernel.org>, "Simon Horman [Horms]" <horms@verge.net.au>, Alexandre Courbot <gnurou@gmail.com>, linux-kernel <linux-kernel@vger.kernel.org>, Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
List-Id: linux-gpio@vger.kernel.org

Hi Magnus,

On 02/24/2014 06:57 AM, Magnus Damm wrote:
> Hi Vladimir,
>
> On Mon, Feb 24, 2014 at 1:37 AM,<vladimir.barinov@cogentembedded.com>  wrote:
>> From: Vladimir Barinov<vladimir.barinov@cogentembedded.com>
>>
>> This adds ability to use gpio API at board init_machine level.
>>
>> F.e. it can be used in the following situation.
>> Many reference hardware has onboard switches that selects which periferals
>> to connect to the system. The gpio input state from switches can be used
>> in choosing platform devices runtime in board code instead of ifdefs/defconfig
>> changes.
>>
>> Signed-off-by:<vladimir.barinov@cogentembedded.com>
>>
>> ---
>>   drivers/gpio/gpio-rcar.c |   12 +++++++++++-
>>   1 file changed, 11 insertions(+), 1 deletion(-)
>>
>> Index: build/drivers/gpio/gpio-rcar.c
>> ===================================================================
>> --- build.orig/drivers/gpio/gpio-rcar.c 2014-02-22 23:21:51.456229152 +0400
>> +++ build/drivers/gpio/gpio-rcar.c      2014-02-22 23:21:52.320229133 +0400
>> @@ -485,7 +485,17 @@
>>          }
>>   };
>>
>> -module_platform_driver(gpio_rcar_device_driver);
>> +static int __init gpio_rcar_init(void)
>> +{
>> +       return platform_driver_register(&gpio_rcar_device_driver);
>> +}
>> +postcore_initcall(gpio_rcar_init);
>> +
>> +static void __exit gpio_rcar_exit(void)
>> +{
>> +       platform_driver_unregister(&gpio_rcar_device_driver);
>> +}
>> +module_exit(gpio_rcar_exit);
>>
>>   MODULE_AUTHOR("Magnus Damm");
>>   MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
> Hi Vladimir,
>
> Thanks for your help. Good to see that you are working on enabling the
> dual role USB port on Koelsch.
>
> Your current board code is checking some DIP switch value during boot,
> and that kind of early use of GPIO would require a change in the probe
> order like this patch implements. I do however believe that we should
> not implement checking during boot like this.
>
> If you for instance check the legacy Lager USBHS DIP switch code that
> runs during driver probe() then that can run can use GPIO without the
> need for a change like this. So your GPIO user code needs to be
> adjusted.
Yes, this is true for USBHS that has platform callbacks like 
hardware_init/exit.
But this is not acceptable for other devices like EHCI PCI/PHY and others.
So we wouldn't be able to do such fixup for other cases.
>
> So this patch will receive a NAK from me I'm afraid.
>
>
Thank you for review.

Regards,
Vladimir