From: "Grygorii.Strashko@linaro.org" <grygorii.strashko@linaro.org>
To: Javier Martinez Canillas <javier@dowhile0.org>,
Linus Walleij <linus.walleij@linaro.org>
Cc: "Grygorii.Strashko@linaro.org" <grygorii.strashko@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
Tony Lindgren <tony@atomide.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Kevin Hilman <khilman@deeprootsystems.com>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
Linux GPIO List <linux-gpio@vger.kernel.org>
Subject: Re: [PATCH 2/7] gpio: omap: fix error handling in omap_gpio_irq_type
Date: Wed, 03 Jun 2015 22:34:23 +0300 [thread overview]
Message-ID: <556F56BF.8090803@linaro.org> (raw)
In-Reply-To: <556DBD6D.8090306@linaro.org>
Hi Linus,
On 06/02/2015 05:27 PM, Grygorii.Strashko@linaro.org wrote:
> On 06/02/2015 12:40 PM, Javier Martinez Canillas wrote:
>> Hello Grygorii,
>>
>> On Fri, May 22, 2015 at 4:35 PM, Grygorii Strashko
>> <grygorii.strashko@linaro.org> wrote:
>>> The GPIO bank will be kept powered in case if input parameters
>>> are invalid or error occurred in omap_gpio_irq_type.
>>>
>>> Hence, fix it by ensuring that GPIO bank will be unpowered
>>> in case of errors and add additional check of value returned
>>> from omap_set_gpio_triggering().
>>>
>>> Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
>>> ---
>>> drivers/gpio/gpio-omap.c | 16 ++++++++++++----
>>> 1 file changed, 12 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
>>> index bb60cbc..f6cc638 100644
>>> --- a/drivers/gpio/gpio-omap.c
>>> +++ b/drivers/gpio/gpio-omap.c
>>> @@ -488,9 +488,6 @@ static int omap_gpio_irq_type(struct irq_data *d,
>>> unsigned type)
>>> unsigned long flags;
>>> unsigned offset = d->hwirq;
>>>
>>> - if (!BANK_USED(bank))
>>> - pm_runtime_get_sync(bank->dev);
>>> -
>>> if (type & ~IRQ_TYPE_SENSE_MASK)
>>> return -EINVAL;
>>>
>>> @@ -498,12 +495,18 @@ static int omap_gpio_irq_type(struct irq_data
>>> *d, unsigned type)
>>> (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
>>> return -EINVAL;
>>>
>>> + if (!BANK_USED(bank))
>>> + pm_runtime_get_sync(bank->dev);
>>> +
>>> spin_lock_irqsave(&bank->lock, flags);
>>> retval = omap_set_gpio_triggering(bank, offset, type);
>>> + if (retval)
>>
>> At this point the bank->lock spinlock is held so you need to add a
>> spin_unlock_irqrestore() in the error path.
>
> Ops. Thanks for catching it.
>>
>>> + goto error;
>>> omap_gpio_init_irq(bank, offset);
>>> if (!omap_gpio_is_input(bank, offset)) {
>>> spin_unlock_irqrestore(&bank->lock, flags);
>>> - return -EINVAL;
>>> + retval = -EINVAL;
>>> + goto error;
>>> }
>>> spin_unlock_irqrestore(&bank->lock, flags);
>>>
>>> @@ -512,6 +515,11 @@ static int omap_gpio_irq_type(struct irq_data
>>> *d, unsigned type)
>>> else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
>>> __irq_set_handler_locked(d->irq, handle_edge_irq);
>>>
>>> + return 0;
>>> +
>>> +error:
>>> + if (!BANK_USED(bank))
>>> + pm_runtime_put(bank->dev);
>>> return retval;
>>> }
>>>
>>> --
>>
>> But you are correct about the runtime PM bug so after addressing the
>> above comment, feel free to add:
>>
>> Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
>>
>
> Linus, How do prefer me to fix it?
> Resend whole patch or send additional fix on top of patch 5.
>
Below is the additional patch to fix issue reported by Javier.
Pls. inform me if you would like me to send v2 of this patch instead.
--
regards,
-grygorii
------ <
>From 611cdfe480f095136e55f155bb71aeb09ea994b0 Mon Sep 17 00:00:00 2001
From: Grygorii Strashko <grygorii.strashko@linaro.org>
Date: Wed, 3 Jun 2015 19:15:19 +0300
Subject: [PATCH] gpio: omap: add missed spin_unlock_irqrestore in omap_gpio_irq_type
Add missed spin_unlock_irqrestore in omap_gpio_irq_type when
omap_set_gpio_triggering() is failed.
This fixes patch 'gpio: omap: fix error handling in omap_gpio_irq_type'
Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
---
drivers/gpio/gpio-omap.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index e26dc40..e3f8205 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -490,8 +490,10 @@ static int omap_gpio_irq_type(struct irq_data *d, unsigned type)
spin_lock_irqsave(&bank->lock, flags);
retval = omap_set_gpio_triggering(bank, offset, type);
- if (retval)
+ if (retval) {
+ spin_unlock_irqrestore(&bank->lock, flags);
goto error;
+ }
spin_unlock_irqrestore(&bank->lock, flags);
if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
--
1.9.1
next prev parent reply other threads:[~2015-06-03 19:34 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-22 14:35 [RFC/RFT PATCH 0/7] gpio: omap: rework and fixes Grygorii Strashko
2015-05-22 14:35 ` [PATCH 1/7] gpio: omap: fix omap_gpio_free to not clean up irq configuration Grygorii Strashko
2015-06-01 13:11 ` Linus Walleij
2015-06-02 9:31 ` Javier Martinez Canillas
2015-05-22 14:35 ` [PATCH 2/7] gpio: omap: fix error handling in omap_gpio_irq_type Grygorii Strashko
2015-06-02 9:40 ` Javier Martinez Canillas
2015-06-02 14:27 ` Grygorii.Strashko@linaro.org
2015-06-03 19:34 ` Grygorii.Strashko@linaro.org [this message]
2015-05-22 14:35 ` [RFC/RFT PATCH 3/7] gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers Grygorii Strashko
2015-05-22 14:35 ` [RFC/RFT PATCH 4/7] gpio: omap: rework omap_gpio_request to touch only gpio " Grygorii Strashko
2015-05-22 14:35 ` [RFC/RFT PATCH 5/7] gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly Grygorii Strashko
2015-05-22 14:35 ` [RFC/RFT PATCH 6/7] gpio: omap: clean up omap_gpio_irq_type Grygorii Strashko
2015-05-22 17:53 ` Tony Lindgren
2015-05-22 14:35 ` [RFC/RFT PATCH v2 7/7] gpio: omap: ensure that runtime pm will disable unused gpio banks Grygorii Strashko
2015-05-22 18:10 ` Tony Lindgren
2015-05-25 14:46 ` Grygorii.Strashko@linaro.org
2015-05-25 15:08 ` Grygorii.Strashko@linaro.org
2015-05-22 19:03 ` [RFC/RFT PATCH 0/7] gpio: omap: rework and fixes Tony Lindgren
2015-06-01 13:15 ` Linus Walleij
2015-06-01 17:14 ` santosh shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=556F56BF.8090803@linaro.org \
--to=grygorii.strashko@linaro.org \
--cc=gnurou@gmail.com \
--cc=javier@dowhile0.org \
--cc=khilman@deeprootsystems.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=ssantosh@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).