From: Michael Hennerich <michael.hennerich@analog.com>
To: Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, Johan Hovold <johan@kernel.org>,
Alexandre Courbot <acourbot@nvidia.com>,
Michael Welling <mwelling@ieee.org>,
Markus Pargmann <mpa@pengutronix.de>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Subject: Re: [PATCH 155/182] input: adp5588-keys: use gpiochip data pointer
Date: Wed, 9 Dec 2015 14:42:48 +0100 [thread overview]
Message-ID: <56682FD8.8080003@analog.com> (raw)
In-Reply-To: <1449668693-5734-1-git-send-email-linus.walleij@linaro.org>
On 12/09/2015 02:44 PM, Linus Walleij wrote:
> This makes the driver use the data pointer added to the gpio_chip
> to store a pointer to the state container instead of relying on
> container_of().
>
> Cc: Michael Hennerich <michael.hennerich@analog.com>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
> ---
> Dmitry: please ACK this so I can take it through the GPIO tree.
> ---
> drivers/input/keyboard/adp5588-keys.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
> index 21a62d0fa764..53fe9a3fb620 100644
> --- a/drivers/input/keyboard/adp5588-keys.c
> +++ b/drivers/input/keyboard/adp5588-keys.c
> @@ -73,7 +73,7 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
> #ifdef CONFIG_GPIOLIB
> static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
> {
> - struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
> + struct adp5588_kpad *kpad = gpiochip_get_data(chip);
> unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
> unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
> int val;
> @@ -93,7 +93,7 @@ static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
> static void adp5588_gpio_set_value(struct gpio_chip *chip,
> unsigned off, int val)
> {
> - struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
> + struct adp5588_kpad *kpad = gpiochip_get_data(chip);
> unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
> unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
>
> @@ -112,7 +112,7 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
>
> static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
> {
> - struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
> + struct adp5588_kpad *kpad = gpiochip_get_data(chip);
> unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
> unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
> int ret;
> @@ -130,7 +130,7 @@ static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
> static int adp5588_gpio_direction_output(struct gpio_chip *chip,
> unsigned off, int val)
> {
> - struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
> + struct adp5588_kpad *kpad = gpiochip_get_data(chip);
> unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
> unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
> int ret;
> @@ -210,7 +210,7 @@ static int adp5588_gpio_add(struct adp5588_kpad *kpad)
>
> mutex_init(&kpad->gpio_lock);
>
> - error = gpiochip_add(&kpad->gc);
> + error = gpiochip_add_data(&kpad->gc, kpad);
> if (error) {
> dev_err(dev, "gpiochip_add failed, err: %d\n", error);
> return error;
>
--
Greetings,
Michael
--
Analog Devices GmbH Wilhelm-Wagenfeld-Str. 6 80807 Muenchen
Sitz der Gesellschaft: Muenchen; Registergericht: Muenchen HRB 40368;
Geschaeftsfuehrer:Dr.Carsten Suckrow, Thomas Wessel, William A. Martin,
Margaret Seif
next prev parent reply other threads:[~2015-12-09 13:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-09 13:44 [PATCH 155/182] input: adp5588-keys: use gpiochip data pointer Linus Walleij
2015-12-09 13:42 ` Michael Hennerich [this message]
2015-12-16 22:07 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56682FD8.8080003@analog.com \
--to=michael.hennerich@analog.com \
--cc=acourbot@nvidia.com \
--cc=dmitry.torokhov@gmail.com \
--cc=johan@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mpa@pengutronix.de \
--cc=mwelling@ieee.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).