From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org
Cc: andy.shevchenko@gmail.com, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
William Breathitt Gray <vilhelm.gray@gmail.com>
Subject: [PATCH v2 6/8] gpio: 104-idi-48: Implement get_multiple callback
Date: Thu, 15 Mar 2018 11:53:17 -0400 [thread overview]
Message-ID: <5ec68441ce758b17c21264a1a1bb5ab98b5263e8.1521128287.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1521128287.git.vilhelm.gray@gmail.com>
The ACCES I/O 104-IDI-48 series of devices provides 48
optically-isolated inputs accessed via six 8-bit ports. Since eight
input lines are acquired on a single port input read, the 104-IDI-48
GPIO driver may improve multiple input reads by utilizing a get_multiple
callback. This patch implements the idi_48_gpio_get_multiple function
which serves as the respective get_multiple callback.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
drivers/gpio/gpio-104-idi-48.c | 46 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/gpio/gpio-104-idi-48.c b/drivers/gpio/gpio-104-idi-48.c
index add859d59766..1beb6b0591ee 100644
--- a/drivers/gpio/gpio-104-idi-48.c
+++ b/drivers/gpio/gpio-104-idi-48.c
@@ -88,6 +88,51 @@ static int idi_48_gpio_get(struct gpio_chip *chip, unsigned offset)
return 0;
}
+static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+ size_t i;
+ const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+ const unsigned int gpio_reg_size = 8;
+ unsigned int bits_offset;
+ size_t word_index;
+ unsigned int word_offset;
+ unsigned long mask_word;
+ const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
+ unsigned long port_state;
+
+ /* clear bits array to a clean slate */
+ bitmap_zero(bits, chip->ngpio);
+
+ /* get bits are evaluated a gpio port register at a time */
+ for (i = 0; i < ARRAY_SIZE(ports); i++) {
+ /* gpio offset in bits array */
+ bits_offset = i * gpio_reg_size;
+
+ /* word index for bits array */
+ word_index = BIT_WORD(bits_offset);
+
+ /* gpio offset within current word of bits array */
+ word_offset = bits_offset % BITS_PER_LONG;
+
+ /* mask of get bits for current gpio within current word */
+ word_mask = mask[word_index] & (port_mask << word_offset);
+ if (!word_mask) {
+ /* no get bits in this port so skip to next one */
+ continue;
+ }
+
+ /* read bits from current gpio port */
+ port_state = inb(idi48egpio->base + ports[i]);
+
+ /* store acquired bits at respective bits array offset */
+ bits[word_index] |= port_state << word_offset;
+ }
+
+ return 0;
+}
+
static void idi_48_irq_ack(struct irq_data *data)
{
}
@@ -256,6 +301,7 @@ static int idi_48_probe(struct device *dev, unsigned int id)
idi48gpio->chip.get_direction = idi_48_gpio_get_direction;
idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
idi48gpio->chip.get = idi_48_gpio_get;
+ idi48gpio->chip.get_multiple = idi_48_gpio_get_multiple;
idi48gpio->base = base[id];
raw_spin_lock_init(&idi48gpio->lock);
--
2.16.2
next prev parent reply other threads:[~2018-03-15 15:53 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-15 15:46 [PATCH v2 0/8] Implement get_multiple for ACCES and PC/104 drivers William Breathitt Gray
2018-03-15 15:46 ` [PATCH v2 1/8] iio: stx104: Implement get_multiple callback William Breathitt Gray
2018-03-15 15:46 ` [PATCH v2 2/8] gpio: 104-idio-16: " William Breathitt Gray
2018-03-15 15:47 ` [PATCH v2 3/8] gpio: pci-idio-16: " William Breathitt Gray
2018-03-17 19:16 ` kbuild test robot
2018-03-15 15:52 ` [PATCH v2 4/8] gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks William Breathitt Gray
2018-03-17 21:01 ` kbuild test robot
2018-03-15 15:53 ` [PATCH v2 5/8] gpio: 104-dio-48e: Implement get_multiple callback William Breathitt Gray
2018-03-17 15:47 ` kbuild test robot
2018-03-15 15:53 ` William Breathitt Gray [this message]
2018-03-17 15:13 ` [PATCH v2 6/8] gpio: 104-idi-48: " kbuild test robot
2018-03-15 15:53 ` [PATCH v2 7/8] gpio: gpio-mm: " William Breathitt Gray
2018-03-15 15:53 ` [PATCH v2 8/8] gpio: ws16c48: " William Breathitt Gray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5ec68441ce758b17c21264a1a1bb5ab98b5263e8.1521128287.git.vilhelm.gray@gmail.com \
--to=vilhelm.gray@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).