[PATCH 0/3] convert Atmel's PIO4 bindings to json-schema

[PATCH 0/3] convert Atmel's PIO4 bindings to json-schema

[Balakrishnan Sambath]

- Convert Atmel's PIO4 pin controller Device Tree bindings to a
YAML-based DT schema.

- Move sama5d2-pinfunc.h and sama7g5-pinfunc.h files to the
include/dt-bindings/pinctrl directory to enable their inclusion in YAML
DT-binding examples.

- The bindings are tested with make dt_binding_check dtbs_check

Note:
- The patch "[PATCH 3/3] dt-bindings: pinctrl: at91-pio4: convert
Atmel's PIO4 bindings to json-schema" has dependency on "[PATCH 1/3]
ARM: dts: microchip: sama5d2: Move pinfunc.h headers [PATCH 2/3] ARM:
dts: microchip: sama7g5: Move pinfunc.h headers"  

Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
---
Balakrishnan Sambath (3):
      ARM: dts: microchip: sama5d2: Move pinfunc.h headers
      ARM: dts: microchip: sama7g5: Move pinfunc.h headers
      dt-bindings: pinctrl: at91-pio4: convert Atmel's PIO4 bindings to json-schema

 .../bindings/pinctrl/atmel,at91-pio4-pinctrl.txt   |  98 ---------------
 .../bindings/pinctrl/atmel,sama5d2-pinctrl.yaml    | 140 +++++++++++++++++++++
 .../boot/dts/microchip/at91-kizbox3_common.dtsi    |   2 +-
 .../arm/boot/dts/microchip/at91-sama5d27_som1.dtsi |   2 +-
 .../boot/dts/microchip/at91-sama5d27_wlsom1.dtsi   |   2 +-
 .../boot/dts/microchip/at91-sama5d29_curiosity.dts |   2 +-
 arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts   |   2 +-
 .../arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts |   2 +-
 .../boot/dts/microchip/at91-sama5d2_xplained.dts   |   2 +-
 arch/arm/boot/dts/microchip/at91-sama7g5ek.dts     |   2 +-
 .../dt-bindings/pinctrl}/sama5d2-pinfunc.h         |   0
 .../dt-bindings/pinctrl}/sama7g5-pinfunc.h         |   0
 12 files changed, 148 insertions(+), 106 deletions(-)
---
base-commit: 805d849d7c3cc1f38efefd48b2480d62b7b5dcb7
change-id: 20240223-pio4-pinctrl-yaml-c06c10200395

Best regards,
-- 
Balakrishnan Sambath <balakrishnan.s@microchip.com>

[PATCH 1/3] ARM: dts: microchip: sama5d2: Move pinfunc.h headers

[Balakrishnan Sambath]

Move sama5d2-pinfunc.h into include/dt-bindings/pinctrl so that we can
include it in yaml dt-binding examples.

Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
---
 arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi                    | 2 +-
 arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi                     | 2 +-
 arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi                   | 2 +-
 arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts                 | 2 +-
 arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts                        | 2 +-
 arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts                     | 2 +-
 arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts                   | 2 +-
 .../dts/microchip => include/dt-bindings/pinctrl}/sama5d2-pinfunc.h     | 0
 8 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
index 465664628419..30a0119d260e 100644
--- a/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-kizbox3_common.dtsi
@@ -11,7 +11,7 @@
  */
 /dts-v1/;
 #include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
+#include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/pinctrl/at91.h>
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
index 95ecb7d040a8..6c8f658ec51c 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1.dtsi
@@ -7,7 +7,7 @@
  *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
  */
 #include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
+#include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
index 4617805c7748..6b8e688bb98a 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
@@ -8,7 +8,7 @@
  * Author: Eugen Hristev <eugen.hristev@microcihp.com>
  */
 #include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
+#include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/pinctrl/at91.h>
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
index 6b02b7bcfd49..944cc68784a4 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d29_curiosity.dts
@@ -9,7 +9,7 @@
  */
 /dts-v1/;
 #include "sama5d29.dtsi"
-#include "sama5d2-pinfunc.h"
+#include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
index 999adeca6f33..62d331db8dd5 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_icp.dts
@@ -10,7 +10,7 @@
  */
 /dts-v1/;
 #include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
+#include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
index 200b20515ab1..28df6bc7b28f 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_ptc_ek.dts
@@ -8,7 +8,7 @@
  */
 /dts-v1/;
 #include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
+#include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
index 6680031387e8..60adaae39c83 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d2_xplained.dts
@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
+#include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/boot/dts/microchip/sama5d2-pinfunc.h b/include/dt-bindings/pinctrl/sama5d2-pinfunc.h
similarity index 100%
rename from arch/arm/boot/dts/microchip/sama5d2-pinfunc.h
rename to include/dt-bindings/pinctrl/sama5d2-pinfunc.h

-- 
2.25.1

[PATCH 2/3] ARM: dts: microchip: sama7g5: Move pinfunc.h headers

[Balakrishnan Sambath]

Move sama7g5-pinfunc.h into include/dt-bindings/pinctrl so that we can
include it in yaml dt-binding examples.

Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
---
 arch/arm/boot/dts/microchip/at91-sama7g5ek.dts                          | 2 +-
 .../dts/microchip => include/dt-bindings/pinctrl}/sama7g5-pinfunc.h     | 0
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
index 217e9b96c61e..a92c37e57aaf 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7g5ek.dts
@@ -9,7 +9,7 @@
  *
  */
 /dts-v1/;
-#include "sama7g5-pinfunc.h"
+#include <dt-bindings/pinctrl/sama7g5-pinfunc.h>
 #include "sama7g5.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/boot/dts/microchip/sama7g5-pinfunc.h b/include/dt-bindings/pinctrl/sama7g5-pinfunc.h
similarity index 100%
rename from arch/arm/boot/dts/microchip/sama7g5-pinfunc.h
rename to include/dt-bindings/pinctrl/sama7g5-pinfunc.h

-- 
2.25.1

[PATCH 3/3] dt-bindings: pinctrl: at91-pio4: convert Atmel's PIO4 bindings to json-schema

[Balakrishnan Sambath]

Convert the existing text DT bindings of Atmel's PIO4 pincontroller to
yaml based DT schema.

Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
---
 .../bindings/pinctrl/atmel,at91-pio4-pinctrl.txt   |  98 ---------------
 .../bindings/pinctrl/atmel,sama5d2-pinctrl.yaml    | 140 +++++++++++++++++++++
 2 files changed, 140 insertions(+), 98 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
deleted file mode 100644
index 774c3c269c40..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-* Atmel PIO4 Controller
-
-The Atmel PIO4 controller is used to select the function of a pin and to
-configure it.
-
-Required properties:
-- compatible:
-	"atmel,sama5d2-pinctrl"
-	"microchip,sama7g5-pinctrl"
-- reg: base address and length of the PIO controller.
-- interrupts: interrupt outputs from the controller, one for each bank.
-- interrupt-controller: mark the device node as an interrupt controller.
-- #interrupt-cells: should be two.
-- gpio-controller: mark the device node as a gpio controller.
-- #gpio-cells: should be two.
-
-Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-a general description of GPIO and interrupt bindings.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-Each node (or subnode) will list the pins it needs and how to configured these
-pins.
-
-	node {
-		pinmux = <PIN_NUMBER_PINMUX>;
-		GENERIC_PINCONFIG;
-	};
-
-Required properties:
-- pinmux: integer array. Each integer represents a pin number plus mux and
-ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
-right representation of the pin.
-
-Optional properties:
-- GENERIC_PINCONFIG: generic pinconfig options to use:
-	- bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
-	 drive-push-pull input-schmitt-enable, input-debounce, output-low,
-	 output-high.
-	- for microchip,sama7g5-pinctrl only:
-		- slew-rate: 0 - disabled, 1 - enabled (default)
-- atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
-high drive. The default value is low drive.
-
-Example:
-
-#include <sama5d2-pinfunc.h>
-
-...
-{
-	pioA: pinctrl@fc038000 {
-		compatible = "atmel,sama5d2-pinctrl";
-		reg = <0xfc038000 0x600>;
-		interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
-			     <68 IRQ_TYPE_LEVEL_HIGH 7>,
-			     <69 IRQ_TYPE_LEVEL_HIGH 7>,
-			     <70 IRQ_TYPE_LEVEL_HIGH 7>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		clocks = <&pioA_clk>;
-
-		pinctrl_i2c0_default: i2c0_default {
-			pinmux = <PIN_PD21__TWD0>,
-				 <PIN_PD22__TWCK0>;
-			bias-disable;
-		};
-
-		pinctrl_led_gpio_default: led_gpio_default {
-			pinmux = <PIN_PB0>,
-				 <PIN_PB5>;
-			bias-pull-up;
-			atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
-		};
-
-		pinctrl_sdmmc1_default: sdmmc1_default {
-			cmd_data {
-				pinmux = <PIN_PA28__SDMMC1_CMD>,
-					 <PIN_PA18__SDMMC1_DAT0>,
-					 <PIN_PA19__SDMMC1_DAT1>,
-					 <PIN_PA20__SDMMC1_DAT2>,
-					 <PIN_PA21__SDMMC1_DAT3>;
-				bias-pull-up;
-			};
-
-			ck_cd {
-				pinmux = <PIN_PA22__SDMMC1_CK>,
-					 <PIN_PA30__SDMMC1_CD>;
-				bias-disable;
-			};
-		};
-		...
-	};
-};
-...
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,sama5d2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/atmel,sama5d2-pinctrl.yaml
new file mode 100644
index 000000000000..8a2dee1d6dd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,sama5d2-pinctrl.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/atmel,sama5d2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIO4 Controller
+
+maintainers:
+  - Balakrishnan Sambath <balakrishnan.s@microchip.com>
+
+description:
+  The Microchip PIO4 controller is used to select the function of a pin and to
+  configure it.
+
+
+properties:
+  compatible:
+    enum:
+      - microchip,sama7g5-pinctrl
+      - atmel,sama5d2-pinctrl
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    description:
+      Interrupt outputs from the controller, one for each bank.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  clocks:
+    maxItems: 1
+if:
+  properties:
+    compatible:
+      contains:
+        const: microchip,sama7g5-pinctrl
+then:
+  patternProperties:
+    '^.*([-_]default)?$':
+      anyOf:
+        - $ref: "#/$defs/mchp-pio4-pincfg-node-1"
+        - patternProperties:
+            '^[a-z_-][a-z_-]*$':
+              $ref: "#/$defs/mchp-pio4-pincfg-node-1"
+else:
+  patternProperties:
+    '^.*([-_]default)?$':
+      anyOf:
+        - $ref: "#/$defs/mchp-pio4-pincfg-node-2"
+        - patternProperties:
+            '^[a-z_-][a-z_-]*$':
+              $ref: "#/$defs/mchp-pio4-pincfg-node-2"
+
+$defs:
+  mchp-pio4-pincfg-node-1:
+    $ref: pincfg-node.yaml#properties
+    properties:
+      pinmux:
+        $ref: pinmux-node.yaml#/properties/pinmux
+      atmel,drive-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+    required:
+      - pinmux
+
+  mchp-pio4-pincfg-node-2:
+    $ref: pincfg-node.yaml#properties
+    properties:
+      pinmux:
+        $ref: pinmux-node.yaml#/properties/pinmux
+    required:
+      - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
+
+    pinctrl@fc038000 {
+        compatible = "atmel,sama5d2-pinctrl";
+        reg = <0xfc038000 0x600>;
+        interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+                     <68 IRQ_TYPE_LEVEL_HIGH 7>,
+                     <69 IRQ_TYPE_LEVEL_HIGH 7>,
+                     <70 IRQ_TYPE_LEVEL_HIGH 7>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        clocks = <&pioA_clk>;
+
+        pinctrl_i2c0_default: i2c0_default {
+            pinmux = <PIN_PD21__TWD0>,
+                     <PIN_PD22__TWCK0>;
+            bias-disable;
+        };
+
+        pinctrl_sdmmc1_default: sdmmc1_default {
+            cmd_data {
+                pinmux = <PIN_PA28__SDMMC1_CMD>,
+                         <PIN_PA18__SDMMC1_DAT0>,
+                         <PIN_PA19__SDMMC1_DAT1>,
+                         <PIN_PA20__SDMMC1_DAT2>,
+                         <PIN_PA21__SDMMC1_DAT3>;
+                bias-pull-up;
+            };
+
+            ck_cd {
+                pinmux = <PIN_PA22__SDMMC1_CK>,
+                         <PIN_PA30__SDMMC1_CD>;
+                bias-disable;
+            };
+        };
+    };
+...

-- 
2.25.1

Re: [PATCH 3/3] dt-bindings: pinctrl: at91-pio4: convert Atmel's PIO4 bindings to json-schema

[Rob Herring]

On Thu, 29 Feb 2024 17:09:32 +0530, Balakrishnan Sambath wrote:
> Convert the existing text DT bindings of Atmel's PIO4 pincontroller to
> yaml based DT schema.
> 
> Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
> ---
>  .../bindings/pinctrl/atmel,at91-pio4-pinctrl.txt   |  98 ---------------
>  .../bindings/pinctrl/atmel,sama5d2-pinctrl.yaml    | 140 +++++++++++++++++++++
>  2 files changed, 140 insertions(+), 98 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pinctrl/atmel,sama5d2-pinctrl.example.dts:27:18: fatal error: dt-bindings/pinctrl/sama5d2-pinfunc.h: No such file or directory
   27 |         #include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[2]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/pinctrl/atmel,sama5d2-pinctrl.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1428: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240229-pio4-pinctrl-yaml-v1-3-c4d8279c083f@microchip.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH 3/3] dt-bindings: pinctrl: at91-pio4: convert Atmel's PIO4 bindings to json-schema

[Krzysztof Kozlowski]

On 29/02/2024 12:39, Balakrishnan Sambath wrote:
> Convert the existing text DT bindings of Atmel's PIO4 pincontroller to
> yaml based DT schema.
> 
> Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
> ---

Dependency shall be noted here, with lore link.

>  .../bindings/pinctrl/atmel,at91-pio4-pinctrl.txt   |  98 ---------------
>  .../bindings/pinctrl/atmel,sama5d2-pinctrl.yaml    | 140 +++++++++++++++++++++
>  2 files changed, 140 insertions(+), 98 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> deleted file mode 100644
> index 774c3c269c40..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> +++ /dev/null
> @@ -1,98 +0,0 @@
> -* Atmel PIO4 Controller

...

> -...
> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,sama5d2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/atmel,sama5d2-pinctrl.yaml
> new file mode 100644
> index 000000000000..8a2dee1d6dd3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,sama5d2-pinctrl.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/atmel,sama5d2-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip PIO4 Controller
> +
> +maintainers:
> +  - Balakrishnan Sambath <balakrishnan.s@microchip.com>
> +
> +description:
> +  The Microchip PIO4 controller is used to select the function of a pin and to
> +  configure it.
> +
> +

One blank line only.

> +properties:
> +  compatible:
> +    enum:
> +      - microchip,sama7g5-pinctrl
> +      - atmel,sama5d2-pinctrl

Keep them alphabetically ordered.

> +
> +  reg:
> +    minItems: 1
> +    maxItems: 2

You need to describe items instead. And why is this flexible?

> +
> +  interrupts:
> +    description:
> +      Interrupt outputs from the controller, one for each bank.

maxItems

> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +
> +  clocks:
> +    maxItems: 1

Missing blank line.


> +if:

Missing allOf: and then put it how it is in example schema.

> +  properties:
> +    compatible:
> +      contains:
> +        const: microchip,sama7g5-pinctrl
> +then:
> +  patternProperties:
> +    '^.*([-_]default)?$':

No, properties must be defined in top level, not in if:then:. Also
underscore should not be allowed.

> +      anyOf:
> +        - $ref: "#/$defs/mchp-pio4-pincfg-node-1"
> +        - patternProperties:
> +            '^[a-z_-][a-z_-]*$':

Both regexes are way too permissive. Look how other bindings do it.
Usually these are -pins or -group.

> +              $ref: "#/$defs/mchp-pio4-pincfg-node-1"
> +else:
> +  patternProperties:
> +    '^.*([-_]default)?$':
> +      anyOf:
> +        - $ref: "#/$defs/mchp-pio4-pincfg-node-2"
> +        - patternProperties:
> +            '^[a-z_-][a-z_-]*$':
> +              $ref: "#/$defs/mchp-pio4-pincfg-node-2"
> +
> +$defs:
> +  mchp-pio4-pincfg-node-1:
> +    $ref: pincfg-node.yaml#properties
> +    properties:
> +      pinmux:
> +        $ref: pinmux-node.yaml#/properties/pinmux
> +      atmel,drive-strength:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        enum: [0, 1, 2, 3]
> +        default: 0
> +    required:
> +      - pinmux
> +
> +  mchp-pio4-pincfg-node-2:
> +    $ref: pincfg-node.yaml#properties
> +    properties:
> +      pinmux:
> +        $ref: pinmux-node.yaml#/properties/pinmux
> +    required:
> +      - pinmux
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'
> +
> +unevaluatedProperties: false

Nope, this must be additionalProperties: false. If you put here
unevaluated, it's a sign you define properties not in correct spot.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/clock/at91.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/pinctrl/sama5d2-pinfunc.h>
> +
> +    pinctrl@fc038000 {
> +        compatible = "atmel,sama5d2-pinctrl";
> +        reg = <0xfc038000 0x600>;
> +        interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
> +                     <68 IRQ_TYPE_LEVEL_HIGH 7>,
> +                     <69 IRQ_TYPE_LEVEL_HIGH 7>,
> +                     <70 IRQ_TYPE_LEVEL_HIGH 7>;
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        clocks = <&pioA_clk>;
> +
> +        pinctrl_i2c0_default: i2c0_default {

Underscores are not allowed. Please open DTS coding style. Or test your
DTS with W=2.



Best regards,
Krzysztof

Re: [PATCH 1/3] ARM: dts: microchip: sama5d2: Move pinfunc.h headers

[Krzysztof Kozlowski]

On 29/02/2024 12:39, Balakrishnan Sambath wrote:
> Move sama5d2-pinfunc.h into include/dt-bindings/pinctrl so that we can
> include it in yaml dt-binding examples.

That is not a the reason to make something a binding. Please provide
rationale why this is supposed to be binding. Because it does not look
like at all and it is kind of contradictory to what we recently were
doing - moving from bindings to DTS.
> 

Best regards,
Krzysztof

Re: [PATCH 2/3] ARM: dts: microchip: sama7g5: Move pinfunc.h headers

[Krzysztof Kozlowski]

On 29/02/2024 12:39, Balakrishnan Sambath wrote:
> Move sama7g5-pinfunc.h into include/dt-bindings/pinctrl so that we can
> include it in yaml dt-binding examples.
> 

Nope, that's not a reason to make a binding. Provide rationale why this
is supposed to be a binding.

Best regards,
Krzysztof