linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rojhalat Ibrahim <imr@rtschenk.de>
To: Florian Fainelli <f.fainelli@gmail.com>,
	netdev@vger.kernel.org, David Daney <david.daney@cavium.com>
Cc: "linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <acourbot@nvidia.com>
Subject: [PATCH] mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function
Date: Thu, 20 Nov 2014 13:24:44 +0100	[thread overview]
Message-ID: <6441674.xrJo8HXDvD@pcimr> (raw)

Convert mdio-mux-gpio to the GPIO descriptor interface and use the new
gpiod_set_array function to set all output signals simultaneously.

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
--
This patch depends on the gpiod_set_array function, which is available in
the linux-gpio devel tree.

 drivers/net/phy/mdio-mux-gpio.c |   35 +++++++++++++++--------------------
 1 file changed, 15 insertions(+), 20 deletions(-)

diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 0966951..3fdea96 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -14,13 +14,13 @@
 #include <linux/mdio-mux.h>
 #include <linux/of_gpio.h>
 
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
 #define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver"
 
 #define MDIO_MUX_GPIO_MAX_BITS 8
 
 struct mdio_mux_gpio_state {
-	int gpio[MDIO_MUX_GPIO_MAX_BITS];
+	struct gpio_desc *gpio[MDIO_MUX_GPIO_MAX_BITS];
 	unsigned int num_gpios;
 	void *mux_handle;
 };
@@ -28,29 +28,23 @@ struct mdio_mux_gpio_state {
 static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
 				   void *data)
 {
-	int change;
+	int values[MDIO_MUX_GPIO_MAX_BITS];
 	unsigned int n;
 	struct mdio_mux_gpio_state *s = data;
 
 	if (current_child == desired_child)
 		return 0;
 
-	change = current_child == -1 ? -1 : current_child ^ desired_child;
-
 	for (n = 0; n < s->num_gpios; n++) {
-		if (change & 1)
-			gpio_set_value_cansleep(s->gpio[n],
-						(desired_child & 1) != 0);
-		change >>= 1;
-		desired_child >>= 1;
+		values[n] = (desired_child >> n) & 1;
 	}
+	gpiod_set_array_cansleep(s->num_gpios, s->gpio, values);
 
 	return 0;
 }
 
 static int mdio_mux_gpio_probe(struct platform_device *pdev)
 {
-	enum of_gpio_flags f;
 	struct mdio_mux_gpio_state *s;
 	int num_gpios;
 	unsigned int n;
@@ -70,20 +64,17 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
 	s->num_gpios = num_gpios;
 
 	for (n = 0; n < num_gpios; ) {
-		int gpio = of_get_gpio_flags(pdev->dev.of_node, n, &f);
-		if (gpio < 0) {
-			r = (gpio == -ENODEV) ? -EPROBE_DEFER : gpio;
+		struct gpio_desc *gpio = gpiod_get_index(&pdev->dev,
+							 "mdio-mux-gpio", n);
+		if (IS_ERR(gpio)) {
+			r = PTR_ERR(gpio);
 			goto err;
 		}
 		s->gpio[n] = gpio;
 
 		n++;
 
-		r = gpio_request(gpio, "mdio_mux_gpio");
-		if (r)
-			goto err;
-
-		r = gpio_direction_output(gpio, 0);
+		r = gpiod_direction_output(gpio, 0);
 		if (r)
 			goto err;
 	}
@@ -98,15 +89,19 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
 err:
 	while (n) {
 		n--;
-		gpio_free(s->gpio[n]);
+		gpiod_put(s->gpio[n]);
 	}
 	return r;
 }
 
 static int mdio_mux_gpio_remove(struct platform_device *pdev)
 {
+	unsigned int n;
 	struct mdio_mux_gpio_state *s = dev_get_platdata(&pdev->dev);
 	mdio_mux_uninit(s->mux_handle);
+	for (n = 0; n < s->num_gpios; n++) {
+		gpiod_put(s->gpio[n]);
+	}
 	return 0;
 }
 
--
2.0.4


             reply	other threads:[~2014-11-20 12:24 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-20 12:24 Rojhalat Ibrahim [this message]
2014-11-21 20:13 ` [PATCH] mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function David Miller
2014-11-24  8:35   ` Rojhalat Ibrahim
2014-11-24 18:06     ` David Miller
2014-11-25  3:39 ` Alexandre Courbot
2014-11-25  8:13   ` Rojhalat Ibrahim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6441674.xrJo8HXDvD@pcimr \
    --to=imr@rtschenk.de \
    --cc=acourbot@nvidia.com \
    --cc=david.daney@cavium.com \
    --cc=f.fainelli@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).