Re: [PATCH v5 1/2] dt-bindings: adc: add AD7173

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 23/11/2023 15:02, mitrutzceclan wrote:
> From: Dumitru Ceclan <mitrutzceclan@gmail.com>
> 
> The AD7173 family offer a complete integrated Sigma-Delta ADC solution
> which can be used in high precision, low noise single channel applications
> or higher speed multiplexed applications. The Sigma-Delta ADC is intended
> primarily for measurement of signals close to DC but also delivers
> outstanding performance with input bandwidths out to ~10kHz.
> 
> Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
> ---
> V4 -> V5
>  - Use string enum instead of integers for "adi,reference-select"
>  - Fix conditional checking in regards to compatible
> 
>  .../bindings/iio/adc/adi,ad7173.yaml          | 169 ++++++++++++++++++
>  1 file changed, 169 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
> new file mode 100644
> index 000000000000..32a59a2f2e91
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
> @@ -0,0 +1,169 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2023 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD7173 ADC
> +
> +maintainers:
> +  - Ceclan Dumitru <dumitru.ceclan@analog.com>
> +
> +description: |
> +  Bindings for the Analog Devices AD717X ADC's. Datasheets for supported chips:

Drop "Bindings for" and instead describe hardware.

> +    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf
> +    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf
> +    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf
> +    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ad7172-2
> +      - adi,ad7173-8
> +      - adi,ad7175-2
> +      - adi,ad7176-2
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  spi-max-frequency:
> +    maximum: 20000000
> +
> +  refin-supply:
> +    description: external reference supply, can be used as reference for conversion.
> +
> +  refin2-supply:
> +    description: external reference supply, can be used as reference for conversion.
> +
> +  avdd-supply:
> +    description: avdd supply, can be used as reference for conversion.
> +
> +  required:

Please test your code before sending. You ignored my comment. This has
both wrong indentation and wrong placement - should be after all
properties and patternProperties.

Do not ignore comments but respond to them.

Best regards,
Krzysztof