From: Marc Zyngier <maz@kernel.org>
To: Marek Vasut <marex@denx.de>
Cc: linux-gpio@vger.kernel.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Linus Walleij <linus.walleij@linaro.org>,
Loic Poulain <loic.poulain@linaro.org>,
NXP Linux Team <linux-imx@nxp.com>, Peng Fan <peng.fan@nxp.com>,
Shawn Guo <shawnguo@kernel.org>
Subject: Re: [PATCH v3 1/2] gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
Date: Mon, 25 Jul 2022 07:53:59 +0100 [thread overview]
Message-ID: <871qu9d6ns.wl-maz@kernel.org> (raw)
In-Reply-To: <fe022bcf-9ae2-8050-77fa-06eb12e35147@denx.de>
On Sun, 24 Jul 2022 19:15:26 +0100,
Marek Vasut <marex@denx.de> wrote:
>
> On 7/24/22 19:50, Marc Zyngier wrote:
>
> [...]
>
> >> +++ b/drivers/gpio/gpio-mxc.c
> >> @@ -147,6 +147,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
> >> {
> >> struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
> >> struct mxc_gpio_port *port = gc->private;
> >> + unsigned long flags;
> >> u32 bit, val;
> >> u32 gpio_idx = d->hwirq;
> >> int edge;
> >> @@ -185,6 +186,8 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
> >> return -EINVAL;
> >> }
> >> + spin_lock_irqsave(&port->gc.bgpio_lock, flags);
> >
> > In my tree, bgpio is a raw spinlock, and has been since 3c938cc5cebcb.
> >
> > Now, looking a bit closer at this code, I have to withdraw my earlier
> > comment about the lack of mutual exclusion in the existing code. All
> > writes are of the form:
> >
> > writel(single_bit_mask, some_addr + MXS_{SET,CLR});
> >
> > which indicates that the write side can be accessed with a hot-bit
> > pattern, avoiding a RWM pattern and thus the need for a lock.
>
> Only for the ISR/IMR, not for the GDIR register, that's why the locks
> are added only around the RMW which don't have these "hot bits".
Only your patch adds any GDIR access.
> > Your second patch, however requires the lock. I'm not sure it is safe
> > to do after the interrupt type has been configured though. You may
> > want to refer to the TRM for this.
>
> There is in fact another unprotected RMW in gpio_set_irq_type() , look
> for GPIO_EDGE_SEL, so the locks should be valid as they are now, right
> ?
I seem to be confused with gpio-mxs.c, and gpio-mxc indeed needs the
lock.
However, you have totally ignored my earlier comments in your v4:
- This doesn't compile, as bgpio_lock has been changed to a *raw*
spinlock. You obviously haven't even bothered testing your patch.
- I asked for a cover letter for any series with multiple patch.
That's not exactly a new requirement.
So we got 4 versions in just over 24 hours, none of which actually
work. Do you see the overarching problem?
M.
--
Without deviation from the norm, progress is not possible.
next prev parent reply other threads:[~2022-07-25 6:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-24 17:10 [PATCH v3 1/2] gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock Marek Vasut
2022-07-24 17:10 ` [PATCH v3 2/2] gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode Marek Vasut
2022-07-25 20:36 ` Andy Shevchenko
2022-07-25 21:26 ` Marek Vasut
2022-07-26 8:22 ` Linus Walleij
2022-07-24 17:50 ` [PATCH v3 1/2] gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock Marc Zyngier
2022-07-24 18:15 ` Marek Vasut
2022-07-25 6:53 ` Marc Zyngier [this message]
2022-07-25 9:57 ` Marek Vasut
2022-07-25 10:06 ` Marc Zyngier
2022-07-24 18:32 ` kernel test robot
2022-07-24 18:42 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871qu9d6ns.wl-maz@kernel.org \
--to=maz@kernel.org \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=loic.poulain@linaro.org \
--cc=marex@denx.de \
--cc=peng.fan@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).