From: Marc Zyngier <maz@kernel.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Subject: Re: [PATCH] pinctrl: nomadik: Make gpio irqchip immutable
Date: Sat, 17 Sep 2022 17:27:01 +0100 [thread overview]
Message-ID: <87o7vekluy.wl-maz@kernel.org> (raw)
In-Reply-To: <20220917131907.86899-1-linus.walleij@linaro.org>
On Sat, 17 Sep 2022 14:19:07 +0100,
Linus Walleij <linus.walleij@linaro.org> wrote:
>
> This makes the Nomadik GPIO irqchip immutable.
>
> Tested on the Samsung Galaxy SIII mini GT-I8190.
>
> Cc: Marc Zyngier <maz@kernel.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/pinctrl/nomadik/pinctrl-nomadik.c | 51 +++++++++++------------
> 1 file changed, 24 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
> index f5014d09d81a..1ee3b45dd6bc 100644
> --- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
> +++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
> @@ -244,7 +244,6 @@ enum nmk_gpio_slpm {
>
> struct nmk_gpio_chip {
> struct gpio_chip chip;
> - struct irq_chip irqchip;
> void __iomem *addr;
> struct clk *clk;
> unsigned int bank;
> @@ -675,15 +674,11 @@ static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
> __nmk_gpio_irq_modify(nmk_chip, offset, WAKE, on);
> }
>
> -static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
> +static void nmk_gpio_irq_maskunmask(struct nmk_gpio_chip *nmk_chip,
> + struct irq_data *d, bool enable)
> {
> - struct nmk_gpio_chip *nmk_chip;
> unsigned long flags;
>
> - nmk_chip = irq_data_get_irq_chip_data(d);
> - if (!nmk_chip)
> - return -EINVAL;
> -
> clk_enable(nmk_chip->clk);
> spin_lock_irqsave(&nmk_gpio_slpm_lock, flags);
> spin_lock(&nmk_chip->lock);
> @@ -696,18 +691,22 @@ static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable)
> spin_unlock(&nmk_chip->lock);
> spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags);
> clk_disable(nmk_chip->clk);
> -
> - return 0;
> }
>
> static void nmk_gpio_irq_mask(struct irq_data *d)
> {
> - nmk_gpio_irq_maskunmask(d, false);
> + struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
As far as I can tell, the per-chip data for a GPIO chip points to the
gpio_chip, and not the driver-specific view that contains the generic
structure. Here you're lucky that they are the same address as the
gpio_chip is the first one. This is the same bug as the one fixed by
d1e972ace423 ("gpio: tegra186: Fix chip_data type confusion").
> +
> + nmk_gpio_irq_maskunmask(nmk_chip, d, false);
> + gpiochip_disable_irq(&nmk_chip->chip, irqd_to_hwirq(d));
> }
>
> static void nmk_gpio_irq_unmask(struct irq_data *d)
> {
> - nmk_gpio_irq_maskunmask(d, true);
> + struct nmk_gpio_chip *nmk_chip = irq_data_get_irq_chip_data(d);
> +
> + gpiochip_enable_irq(&nmk_chip->chip, irqd_to_hwirq(d));
> + nmk_gpio_irq_maskunmask(nmk_chip, d, true);
> }
>
> static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
> @@ -1078,13 +1077,25 @@ static struct nmk_gpio_chip *nmk_gpio_populate_chip(struct device_node *np,
> return nmk_chip;
> }
>
> +static const struct irq_chip nmk_irq_chip = {
> + .name = "nomadik-gpio",
Maybe not, see below.
> + .irq_ack = nmk_gpio_irq_ack,
> + .irq_mask = nmk_gpio_irq_mask,
> + .irq_unmask = nmk_gpio_irq_unmask,
> + .irq_set_type = nmk_gpio_irq_set_type,
> + .irq_set_wake = nmk_gpio_irq_set_wake,
> + .irq_startup = nmk_gpio_irq_startup,
> + .irq_shutdown = nmk_gpio_irq_shutdown,
> + .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_IMMUTABLE,
> + GPIOCHIP_IRQ_RESOURCE_HELPERS,
> +};
> +
> static int nmk_gpio_probe(struct platform_device *dev)
> {
> struct device_node *np = dev->dev.of_node;
> struct nmk_gpio_chip *nmk_chip;
> struct gpio_chip *chip;
> struct gpio_irq_chip *girq;
> - struct irq_chip *irqchip;
> bool supports_sleepmode;
> int irq;
> int ret;
> @@ -1125,22 +1136,8 @@ static int nmk_gpio_probe(struct platform_device *dev)
> chip->can_sleep = false;
> chip->owner = THIS_MODULE;
>
> - irqchip = &nmk_chip->irqchip;
> - irqchip->irq_ack = nmk_gpio_irq_ack;
> - irqchip->irq_mask = nmk_gpio_irq_mask;
> - irqchip->irq_unmask = nmk_gpio_irq_unmask;
> - irqchip->irq_set_type = nmk_gpio_irq_set_type;
> - irqchip->irq_set_wake = nmk_gpio_irq_set_wake;
> - irqchip->irq_startup = nmk_gpio_irq_startup;
> - irqchip->irq_shutdown = nmk_gpio_irq_shutdown;
> - irqchip->flags = IRQCHIP_MASK_ON_SUSPEND;
> - irqchip->name = kasprintf(GFP_KERNEL, "nmk%u-%u-%u",
> - dev->id,
> - chip->base,
> - chip->base + chip->ngpio - 1);
> -
Dropping this is unfortunately a userspace visible change. I'm 99%
sure nobody will ever care, but we've been burned by the remaining 1%,
and I'd rather you keep it using the irq_print_chip() callback with
something like:
static void nmk_gpio_irq_print_chip(struct irq_data *data, struct seq_file *p)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
struct nmk_gpio_chip *nmk_chip = container_of(chip,
struct nmk_gpio_chip,
chip);
seq_printf(p, "nmk%u-%u-%u", nmk_chip->bank,
chip->base, chip->base + chip->ngpio - 1);
}
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
prev parent reply other threads:[~2022-09-17 16:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-17 13:19 [PATCH] pinctrl: nomadik: Make gpio irqchip immutable Linus Walleij
2022-09-17 16:27 ` Marc Zyngier [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o7vekluy.wl-maz@kernel.org \
--to=maz@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).